Abstract:Multi-band transmission is one of the key practical solutions to cope with the continuously growing demand on the capacity of optical communication networks without changing the huge existing fiber base. However, ultra-broadband communication requires the development of novel power efficient optical amplifiers operating beyond C- and L-bands, and this is a major research and technical challenge comparable to the introduction of the seminal erbium-doped fiber amplifiers that dramatically changed the optical communication sector. There are several types of optical fibers operating beyond C- and L-bands that can be used for the development of such amplifiers, specifically the fibers doped with neodymium, praseodymium, thulium, and bismuth. However, among these, Bi-doped fibers are of special interest as the most promising amplification medium because, unlike the others, different Bi-associated active centers allow amplification in an enormous band of overall width of 700 nm (1100–1800 nm). Such spectral coverage can be obtained by using different host materials, such as aluminosilicate, phosphosilicate, silica, and germanosilicate glasses. Here, we report a novel Bi-doped fiber amplifier with record characteristics for E-band amplification, including the highest power conversion efficiency among telecom-compatible E-band amplifiers reported to date. This bismuth-doped fiber amplifier (BDFA) features a maximum gain of 39.8 dB and a minimal noise figure of 4.6 dB enabled by 173 m Bi-doped fiber length. The maximum achieved power conversion efficiency of 38% is higher than that of L-band Er-doped fiber amplifiers. This performance demonstrates the high potential of BDFA for becoming the amplifier of choice in modern multi-band optical communication networks.

9.6-THz Single Fibre Amplifier O-Band Coherent DWDM Transmission

200 Gb/s Optical-Amplifier-Free IM/DD Transmissions Using a Directly Modulated O-Band DFB+R Laser Targeting LR Applications

42.13 Gbit/S 16Qam-Ofdm Photonics-Wireless Transmission in 75-110 Ghz Band

200 Gb/s Unamplified IM/DD Transmission over 20-km SMF with an O-band Low-Chirp Directly Modulated Laser

High Baudrate Short-Reach Communication.

321 Tb/s E/S/C/L-band Transmission with E-band Bismuth-Doped Fiber Amplifier and Optical Processor

Terabit-class coherent communications enabled by an integrated photonics erbium doped amplifier

32Tb/s (320×114Gb/s) PDM-RZ-8QAM transmission over 580km of SMF-28 ultra-low-loss fiber

17 Tb/S (161x114 Gb/S) Polmux-Rz-8psk Transmission Over 662 Km Of Ultra-Low Loss Fiber Using C-Band Edfa Amplification And Digital Coherent Detection

13.4-Tb/s WDM Transmission over 1,280 km Repeated only with PPLN-based Optical Parametric Inline Amplifier

Transmission of 200gb/s PM-16QAM and 150gb/s PM-8QAM DWDM Signals over Long-haul and Transoceanic Distance at 100km Span Length with EDFA-only

260-GBaud Single-Wavelength Coherent Transmission Over 100-km SSMF Based on Novel Arbitrary Waveform Generator and Thin-Film Niobate I/Q Modulator

O-band EML and 4-Bits DAC Enabled 112 GBaud PAM8 Transmission over a 10 Km SSMF Without Optical Amplifiers.

C-band 312gbps PAM8 Transmission over 30km SMF Using Integrated Optical Dispersion Compensator

Wideband (13.7 THz) Gain-Flattened Yb-Doped Fiber Amplifier for Telecommunication Applications

High-Capacity Directly Modulated Optical Transmitter for 2-μm Spectral Region

Experimental Demonstration of 1.08 Tb/S Pdm Co-Scfdm Transmission over 3170 Km Ssmf

E-band telecom-compatible 40 dB gain high-power bismuth-doped fiber amplifier with record power conversion efficiency

8×506-Gb/s 16QAM WDM Signal Coherent Transmission over 6000-Km Enabled by PS and HB-CDM

Wideband Unrepeatered Transmission Using Doped Tellurite-Fiber Amplifiers