Abstract:Piezoelectric poly(vinylidene fluoride) (PVDF) polymer exhibits the flexible characteristic, however, a piezo-generator based on the PVDF polymer normally shows low power density because of its low piezoelectric coefficient. Here, we report a fundamental synergistic strategy to prepare PVDF polymer nanocomposite for enhancing electromechanical coupling performance and improving its energy density, including (i) the mechanically directional stress field (MDSF) fabrication of PVDF nanocomposite doped with polar Pb(Zr,Ti)O 3 (PZT) ceramic nanoparticles via high-energy ball milling, (ii) introduction of micro-cavities holding polar nanoparticles, and (iii) floating electrode (Ag) films spaced uniformly inside the polymer nanocomposite. The investigations reveal that the MDSF fabrication can induce ordered, chain-shape nanocrystalline fibers with a high β-crystal phase, which makes 42 % contribution to the piezoelectricity; while the micro-cavities and floating electrode films after poling exhibit a strong electret effect, which further make 18 % and 27 % contributions, respectively, to the piezoelectricity. This multiple-mechanism synergistic effect results in a much higher piezoelectric coefficient d 33 increased from 4 pC N −1 for a pure PVDF (without bearing a uniaxial stretching) to 33 pC N −1 for the nanocomposite. It further dramatically increases to 228 pC N −1 , a giant apparent piezoelectric charge coefficient d 33 * , for a 3D-printed 7-layer nanocomposite with 360 μm in thickness. An energy harvester (EH) based on the PVDF nanocomposite generates a record high peak power density of 13.2 mW cm −2 and the load power density of 5.46 mW cm −2 under a dynamic pressure of 255 kPa at the frequency of 5 Hz, which is near two orders of magnitude higher than that of a conventional PVDF polymer EHs. The fabricated flexible EH can even directly light up 46 LEDs in real-time or power a blind-man reading system when touching it. This work is of great significance in enlightening future flexible piezoelectronic designs.

Polarity assessment of hydroxide mediated P(VDF-TrFE) composites for piezoelectric energy harvesting and self-powered mechanosensing

Morphotropic phase boundary-based BaTi0.89Sn0.11O3 filler induced polarization tuned P(VDF-TrFE) composites as efficient piezo-tribo hybrid nanogenerators

Ionic liquid modified PVDF/BCZT nanocomposites for space charge induced mechanical energy harvesting performance

Porous, Self-Polarized Ferroelectric Polymer Films Exhibiting Behavior Reminiscent of Morphotropic Phase Boundary Induced by Size-Dependent Interface Effect for Self-Powered Sensing

Promising ferroelectric and piezoelectric response of Cr-doped ZnO nanofiller-incorporated PVDF flexible and laminated nanocomposite system

Modulating Energy Harvesting Behavior of PVDF Piezo-Polymer by Incorporation of BCZT Ceramic Filler

Inducing Polar Phase in Poly(Vinylidene Fluoride) with a Molecular Ferroelectric Copper(II) Complex for Piezoelectric Energy Harvesting

Effect of Zn-Fe2O3 nanomaterials on the phase separated morphologies of polyvinylidene fluoride piezoelectric nanogenerators

Mechanisms for Enhancing Polarization Orientation and Piezoelectric Parameters of PVDF Nanofibers

VDF-content-guided Selection of Piezoelectric P(VDF-TrFE) Films in Sensing and Energy Harvesting Applications

Scalable piezoelectric energy harvesting from PVDF-HFP/BZT-BCT/GO hybrid composite film

Effect of layered transition metal dichalcogenide hybrid nanomaterials on the piezoelectric performance of non‐solvent induced phase separated polyvinylidene fluoride

Large-scale fabrication and performance improvement of polyvinylidene fluoride piezoelectric composite films

Fabrication of rare earth-doped ZnO-PVDF flexible nanocomposite films for ferroelectric response and their application in piezo-responsive bending sensors

The effects of ceramic fillers' performance and preparation process on PZT-based/P(VDF-TrFE) flexible composite films

Design on orientation of one-dimensional ZnO/P(VDF-HFP) nanocomposites for significant enhanced electromechanical conversion

Biocompatible Piezoelectric PVDF/HA/AgNO3 Thin Film Prepared by the Solvent Casting Method

Epitaxy Enhancement of Piezoelectric Properties in P(VDF‐TrFE) Copolymer Films and Applications in Sensing and Energy Harvesting

Enhanced energy density in piezoelectric PVDF-polymer nanocomposite via multiple mechanism synergetic action

Multilayer nanocomposite films with enhanced piezoelectric properties doping PZT nanofibers

Supersonically Sprayed Pvdf and Zno Nanoflowers with Built-In Nanocuboids for Wearable Piezoelectric Nanogenerators