Abstract:This work aims at exploring a novel environment-friendly nanomaterial based on natural clay minerals for arsenic removal in aqueous samples. Halloysite nanotubes (HNTs) were selected as the substrate with Mn oxides loaded on the surface to enhance its arsenic adsorption ability and then grafted onto the SiO 2 -coated Fe 3 O 4 microsphere to get a just enough magnetic performance facilitating the material's post-treatment. The prepared composite (Fe 3 O 4 @SiO 2 @Mn-HNTs) was extensively characterized by various instruments including Fourier transform infrared spectroscope (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TG), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscope (XPS), and X-ray diffraction (XRD). Batch experiments were carried out to get the optimum test conditions for arsenic adsorption by the composite, including pH, loading amount of Mn oxides, adsorbent dosage, and the co-existing ions. The adsorption of As III and As V on Fe 3 O 4 @SiO 2 @Mn-HNTs were both well fitted with the pseudo-second-order kinetic model as well as the Langmuir adsorption isotherm model revealing the chemisorption between arsenic and Fe 3 O 4 @SiO 2 @Mn-HNTs. The adsorption process of As III and As V were both endothermic and spontaneous displayed by the thermodynamic study. The capacities of the prepared composite are 3.28 mg g −1 for As III and 3.52 mg g −1 for As V , respectively, which are comparable or better than those of many reported materials in the references. Toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) tests were carried out to access the secondary environmental risk of the composite and showed that it was quite environmentally stable and can be safely disposed. The composite was successfully applied in environmental water samples indicating its great potential applicability in future.

Synthesis of an attapulgite clay@carbon nanocomposite adsorbent by a hydrothermal carbonization process and their application in the removal of toxic metal ions from water.

Preparation and adsorption property of attapulgite/carbon nanocomposite

Novel environmental-friendly nano-composite magnetic attapulgite functionalized by chitosan and EDTA for cadmium (II) removal

Synthesis and Characterization of Amino-Grafted Attapulgite/graphene Oxide Nanocomposites and Their Adsorption for Pb(II) Removal

In-situ adsorption-conversion recovery of heavy metal cadmium by natural clay mineral for multi-functional photocatalysis

Preparation and Characterization of Mercapto-Functionalized Calcined Attapulgite and Its Removal of Pb (II) and Cd (II) Solution

Construction of magnetic bimetallic oxide‐decorated attapulgite‐based adsorbents for arsenic ion adsorption

Designing of Recyclable Attapulgite for Wastewater Treatments: A Review

Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite

Construction of attapulgite decorated cetylpyridinium bromide/cellulose acetate composite beads for removal of Cr (VI) ions with emphasis on mechanistic insights

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Removal of Cd(II) and Pb(II) from aqueous solution by modified attapulgite clay

Preparation and adsorption of Cd2+ of attapulgite modified by AMPS

Hydrothermal carbonization synthesis of a novel montmorillonite supported carbon nanosphere adsorbent for removal of Cr (VI) from waste water

Novel montmorillonite/jute composites functionalized with polyethyleneimine and cetyltrimethylammonium bromide for Cr(VI) adsorption

Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II))

Ultra-high capacity and anti-interference for Cr(VI) removal by tannin-polyvinylimine modified graphite carbon nitride

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)

High Adsorption Capacity and the Key Role of Carbonate Groups for Heavy Metal Ion Removal by Basic Aluminum Carbonate Porous Nanospheres

Superior adsorption performance of graphitic carbon nitride nanosheets for both cationic and anionic heavy metals from wastewater

Green and simple synthesis of poly (catechol-tetraethylenepentamine)@aminopropyl-modified silica composite for removing toxic Cr(VI)