Abstract:Increasing demand for electrochemical energy storage devices with high energy density, high power density, and long lifespan has posed significant challenges for developing suitable electrodes and electrolyte systems with fast charge transport kinetics and superior cycling stability. 1 As one of the promising electrode materials explored recently, MXenes (M n+1 X n T x ) are a group of two-dimensional transition metal carbides and/or nitrides, in which M is early transition metal, X presents C and/or N, T x stands for the surface groups such as =O, -OH, -Cl or -F. They exhibit excellent high-rate performance in electrochemical energy storage applications due to their unique properties: superior electronic conductivity (~15 000 S cm -1 ) and large interlayer spacing (~1 nm). 2 The charge storage mechanism and performance of the MXenes electrode is highly dependent on the electrode and electrolyte composition. For example, Ti 3 C 2 T x has shown rapid pseudocapacitive (de)intercalation of protons and transformation between the oxygen surface groups (=O) and hydroxyl (-OH) groups in acidic aqueous electrolytes. 3,4 As a result, Ti 3 C 2 T x exhibits an ultrahigh volumetric capacitance of 1500 F cm -3 in H 2 SO 4 electrolyte. 5 In less corrosive neutral aqueous electrolytes, the cation intercalation is accompanied by negligible charge transfer, leading to ultrafast charge storage. 6 Consequently, a moderate capacitance with superior cycling stability is reported in neutral electrolytes compared to acidic electrolytes. In contrast to dilute aqueous electrolyte, which has a limited electrochemical stability window (ESW), the highly concentrated water-in-salt (WIS) electrolyte possesses a large ESW (∼3.0 V) owing to the depressed activity of free water. Besides, the unique solvation structure of WIS electrolyte induces a novel intercalation of fully-solvated Li + at positive potential and increases the capacitance of MXene. 7 As a result, WIS electrolyte helps overcome the drawback of the low energy density of MXene in neutral aqueous electrolytes. In our research, we explored the impact of MXene structure and a novel electrolyte system on the pseudocapacitive performance of MXene. The charge storage behavior of Ti 3 C 2 T x in a molecular crowding electrolyte was explored. Interestingly, Ti 3 C 2 T x displayed one pair of redox peaks with low polarization, differing from both dilute neutral aqueous electrolyte and WIS electrolyte, which may be attributed to the intercalation of Polyethylene glycol (PEG)-solvated Li + cluster. The in situ X-ray diffraction are employed to better understand the charge storage process. We also constructed a MXene/polymer heterostructure with enlarged interlayer spacing. The unique heterostructure delivered a significantly enhanced rate performance in neutral aqueous electrolyte. (a high capacitance retention of 81% at 10 A g -1 ) Reference: Simon, P. & Gogotsi, Y. Nature Materials 7 , 845–854 (2008). Anasori, B. et al. Nature Reviews Materials 2 , 16098 (2017). Mu, X. et al . Advanced Functional Materials 29 , 1902953 (2019). Zhan, C. et al. J. Phys. Chem. Lett. 9 , 1223–1228 (2018). Lukatskaya, M. R. et al. Nat Energy 2 , 1–6 (2017). Ando, Y. et al. Advanced Functional Materials 30 , 2000820 (2020). Wang, X. et al . ACS Nano 15 , 15274–15284 (2021).

Influence of Surface Groups on Electrochemical Properties of Molten Salt Synthesized Ti 3 C 2 T x in Mild Aqueous Electrolytes

Role of Surface Terminations for Charge Storage of Ti3C2T x MXene Electrodes in Aqueous Acidic Electrolyte

Tuning the Surface Chemistry of MXene to Improve Energy Storage: Example of Nitrification by Salt Melt

First-Principles Study on the Structural, Electronic, and Lithium Storage Properties of Ti3C2T2 (T = O, F, H, OH) MXene

Electrochemical characterization of Ti3C2T MXene prepared via a molten salt etching route in an acetonitrile-based electrolyte

High capacitance of MXene (Ti3C2T ) through Intercalation and Surface Modification in Molten Salt

Retraction of "Surface Functional Groups and Interlayer Water Determine the Electrochemical Capacitance of Ti3C2Tx MXene".

Impact of Potential on the Energy Storage Mechanism in Chalcogen and Halogen Surface-Functionalized MXenes: Insights from the Grand Canonical Fixed Potential Method

Surface-Termination Groups' Tuning to Improve the Lithium-Ion-Storage Performance of Ti3C2Tx MXene

Halogenated Ti 3 C 2 MXenes with Electrochemically Active Terminals for High-Performance Zinc Ion Batteries

Ti–Cl Bonds Decorated Ti2NT X MXene Towards High-Performance Lithium-Ion Batteries

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

A General Atomic Surface Modification Strategy for Improving Anchoring and Electrocatalysis Behavior of Ti3C2T2 MXene in Lithium-Sulfur Batteries

Aqueous electrolyte-mediated Al3+ ion storage in electrochemically treated Ti3AlC2

Tailoring Interlayer Structure and Surface Chemical State Intensifies Redox Reaction Activity of Ti3c2tx Mxene

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Unraveling the Charge Storage Mechanism of Ti 3 C 2 T x MXene Electrode in Acidic Electrolyte

Halogenated MXenes with Electrochemically Active Terminals for High Performance Zinc Ion Batteries

One-Pot Green Process to Synthesize MXene with Controllable Surface Terminations using Molten Salts

In Situ Synthesis of MXene with Tunable Morphology by Electrochemical Etching of MAX Phase Prepared in Molten Salt

High-Rate Electrochemical Energy Storage of MXene in Neutral Aqueous Electrolytes