Abstract:The ejector refrigeration cycle (ERC) is often used as the sub-cycle of power and cooling cogeneration systems due to its advantages of simple structure design, few moving parts, less system investment, good stability and reliable operation. Considering the potential of organic Rankine cycle (ORC) in the utilization of low-grade heat, and the advantages of simple structure and many choices for working fluid, a novel power and cooling cogeneration system was designed, based on dual-pressure evaporation ORC (DORC) and ERC. In this system, a common condenser was used by DORC and ERC, and a part of working fluid separated from low-pressure steam generator outlet in DORC was used as the primary flow of ejector to drive ERC. A mathematical model for calculating the thermodynamic and thermoeconomic performances of the system was established. Sensitivity analysis was performed to determine the key parameters of the system, the results showed that the low-pressure evaporation temperature (TLPSG,out), high-pressure evaporation temperature (THP,E), vapor fraction of the low-pressure steam generator outlet (xLPSG,out) and working fluid mass flow ratio of high-pressure stage to low-pressure stage (k) were the four key parameters of the system. Parametric analysis showed that higher TLPSG,out and lower xLPSG,out were beneficial to increase the cooling output and thermal efficiency, while higher THP,E and larger k were helpful to increase the net power output and exergy efficiency. The net power output and exergy efficiency can be optimized by TLPSG,out and xLPSG,out. Using genetic algorithm (GA), multi-objective function optimization was carried out with THP,E, TLPSG,out, xLPSG,out and k as the decision variables. Moreover, the system's adaptability for working fluids R245fa, R236ea, R600, R600a, R601 and R601a was investigated. According to the optimization results, R236ea was the most suitable working fluid. When THP,E was 402.43K, TLPSG,out was 392.42K, xLPSG,out was 0.357 and k was 0.321, the calculated net power output , cooling output, thermal efficiency, exergy efficiency and total cost of unit exergy product (SUCP) were 273.00kW, 121.80kW, 14.52%, 44.03% and 42.62$/MWh, respectively. Exergy analysis was conducted using R236ea as working fluid. The results showed that the two steam generators and condenser were the main components responsible for most of the exergy destruction of the system in both basic case and optimized case. Compared to the basic case, the exergy destruction of the steam generators decreased by about 32.3%, and the total exergy destruction of the system decreased by about 5.0% in optimized case.

Techno-economic optimization of a geothermal multi-product layout composed of a CO 2 trans-critical Rankine-LNG system integrated with ejector cooling system and HDH desalination unit

Multi-aspect analysis and optimization of a novel geothermal-based power, liquefied hydrogen, and freshwater production system

Integrating Geothermal Energy and Desalination Unit into a Poly-Generation Configuration: Comprehensive Study and Optimization

Exergoeconomic evaluation and multi-objective optimization of a novel geothermal-driven zero-emission system for cooling, electricity, and hydrogen production: capable of working with low-temperature resources

Multi-objective optimization and multi-aspect analysis of an innovative geothermal-based multi-generation energy system for power, cooling, hydrogen, and freshwater production

Development of a geothermal-driven multi-output scheme for electricity, cooling, and hydrogen production: Techno-economic assessment and genetic algorithm-based optimization

Improved Efficiency in an Integrated Geothermal Power System Including Fresh Water Unit: Exergoeconomic Analysis and Dual-Objective Optimization

Thermo-economic assessment and optimization of an innovative tri-generation system using supercritical CO2 power system and LNG cold energy recovery

Comprehensive economic analysis and multi-objective optimization of an integrated power and freshwater generation cycle based on flash-binary geothermal and gas turbine cycles

Simultaneous Optimization of Exergy and Economy and Environment (3E) for a Multistage Nested LNG Power Generation System

Parametric study and multi-objective optimization of a combined cooling, desalination and power system

Multi-objective optimization and exergoeconomic analysis of geothermal-based electricity and cooling system using zeotropic mixtures as the working fluid

Optimization next to environmental analysis of harvesting waste heat from a biomass-driven externally-fired gas turbine cycle for sub-zero cooling and production of hydrogen, freshwater, and hot water

Power, cooling, freshwater, and hydrogen production system from a new integrated system working with the zeotropic mixture, using a flash-binary geothermal system

Thermodynamic and exergo-economic analyses and multi-objective optimization of an innovative and efficient geothermal-assisted power and hydrogen cogeneration system

Design and thermo-enviro-economic analyses of a novel thermal design process for a CCHP-desalination application using LNG regasification integrated with a gas turbine power plant

Thermodynamic analysis and optimization of a transcritical CO 2 geothermal power generation system based on the cold energy utilization of LNG

Thermodynamic and thermoeconomic analysis and optimization of a renewable-based hybrid system for power, hydrogen, and freshwater production

Process arrangement and multi-aspect study of a novel environmentally-friendly multigeneration plant relying on a geothermal-based plant combined with the goswami cycle booted by kalina and desalination cycles

Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat

A comparative thermodynamic and exergoeconomic scrutiny of four geothermal systems with various configurations of TEG and HDH unit implementations