Abstract:Lithium-sulfur (Li-S) batteries are widely regarded as the next-generation energy storage technology, due to their high potential in energy density and a low projected cost. Practical applications of such batteries are plagued with radical challenges that mainly stem from two factors. First, both sulfur and its final lithiation product, Li2S, are insulating. Thus, the reaction kinetics is slow and often leads to a low attainable capacity. Second, active material dissolve in the electrolyte in the form of lithium polysulfides. This dissolution causes a series of problems, including loss of cathode materials by diffusion away from the cathode, collapse of the cathode structure, and the polysulfide shuttle effect. As a result, Li-S batteries commonly show fast capacity decay and low coulombic efficiency. Herein, we report the exceptional battery performance of porous carbon-sulfur composite microspheres, PSC-S, that benefited from simultaneous control of nanostructure and microscale particle morphology. The porous carbon microspheres (PSC) was synthesized as the sulfur host,by combining emulsion polymerization and evaporation-induced self-assembly (EISA) process, with a good control of both pore structure and microscale particle morphology. Such material not only demonstrated superioty in attainable capacity, but also in several other critical parameters for the development of high-energy Li-S batteries. PSC-S composite boasts a high tap density of 1.08 g/ml and contains 75 wt.% sulfur embedded into the mesopores of its carbon framework. At a high sulfur loading of 5 mg-S/cm2 and 60wt.% sulfur content in the electrode, this material delivers both high gravimetric and high volumetric capacity with excellent retention. Carbon nanotubes (CNTs) can also be readily incorporated into the microspherical structure in the synthesis process to form a porous spherical carbon-carbon nanotube-sulfur composite (PSC-CNT-S). CNT incorporation effectively raises the conductivity of the composite, and thus significantly improves its high-rate performance. At a high current density of 2.8 mA/cm2, an initial capacity of 1100 mAh/g and a reversible capacity of 700 mAh/g after 200 cycles were achieved in PSC-CNT-S. The resultant areal capacity of over 3.5 mAh/cm2 is much higher than in previous reports of Li-S cathodes fabricated using coating techniques.

High performance lithium-sulfur batteries using threedimensional hierarchical porous carbons to host the sulfur

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

3D nitrogen doped hierarchical porous carbon framework for protecting sulfur cathode in lithium sulfur batteries

3D Hierarchical Mesoporous Carbon with P and N Dual-doped as Electrocatalyst Host for High-performance Li-S Batteries

Hierarchical Nanostructured Carbon/Sulfur Hybrid Cathode for High-Performance Lithium-Sulfur Battery

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries

A highly efficient double-hierarchical sulfur host for advanced lithium-sulfur batteries.

Cobalt-loaded three-dimensional mesoporous carbon as sulfur host for lithium‐sulfur batteries

Three-Dimensional Carbon-Catalyst As Sulfur Host for Polysulfide Regulation in Lithium-Sulfur Batteries

Sulfur Impregnated N , P-doped Hierarchical Porous Carbon as Cathode for High Performance LiS Batteries Mr

A compact 3D interconnected sulfur cathode for high-energy, high-power and long-life lithium-sulfur batteries

Three-dimensional Carbon Framework As High-Proportion Sulfur Host for High-Performance Lithium-Sulfur Batteries

A hierarchical micro/mesoporous carbon fiber/sulfur composite for high-performance lithium-sulfur batteries

Ultra-high Conductive 3D Aluminum Photonic Crystal As Sulfur Immobilizer for High-Performance Lithium-Sulfur Batteries

Mesoporous Carbon-Sulfur Composite Microspheres with Multiscale Morphology Control to Achieve High Areal Capacity for Lithium-Sulfur Battery Cathodes

Propelling Polysulfides Transformation for High-Rate and Long-Life Lithium–sulfur Batteries

Concrete-like High Sulfur Content Cathodes with Enhanced Electrochemical Performance for Lithium-Sulfur Batteries

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

3D conductive molecular framework derived MnO 2 /N, P co-doped carbon as sulfur hosts for high-performance lithium‐sulfur batteries

Hierarchical High‐Porosity Graphene Oxide‐Porous Carbon/Sulfur Composite with Sodium Chloride As Temporary Space Holders for High‐Performance Lithium‐Sulfur Batteries