Abstract:Introduction: The Loess Plateau has long been plagued by cascading loess landslides. The rapid identification of these landslides, along with the accurate determination of their failure modes, is essential for conducting precise disaster assessments in the region. Such assessments are critical for minimizing both human casualties and economic losses. However, the lack of reliable reference data for the early identification of landslide failure modes has resulted in limited detection accuracy, complicating the differentiation between various failure modes. Therefore, investigating the deformation and failure characteristics of loess landslides under different failure modes is crucial for providing a scientific foundation for early hazard detection and the accurate assessment of risk profiles. Methods: This work examines the pre-slip deformation and post-slip damage characteristics of the rotational-sliding Huzhu Landslide and the translational-sliding Zhongzhai Landslide through a combination of field investigations, unmanned aerial vehicle surveys, and remote sensing interpretation. Physical model tests were conducted to simulate the instability and failure processes of both rotational and translational loess landslides. Meanwhile, three-dimensional models and orthophoto graphic images at various stages of the landslides were generated using Contexcapture. Results: The initial stages of rotational sliding landslides are marked by the formation of distinct tensile cracks at the trailing edge of the slope and minor uplift at the front. As the uplift at the front progresses and numerous extension fissures develop, the stability of the landslide reduces progressively. Upon reaching instability, the sliding velocity of the sliding mass initially accelerates before decelerating, with majority of the mass remaining on the sliding surface and retaining relatively well structural integrity. At the trailing edge of the landslide, characteristic features such as falling scarps, fractured walls, and sunken grooves can be observed, while the front displays significant bulging phenomena. In contrast, translational sliding landslides are initially characterized by minor tensile cracks at the trailing edge and pronounced deformation at the front. As these tensile cracks propagate, the landslide are prone to sudden instability under external triggering factors. Following the onset of instability, the sliding mass undergoes rapid movement, with only a small part of the mass remaining on the sliding surface. Discussion: Landslides triggered by different factors and occurring under varying water content conditions may exhibit significant differences in their pre-failure behavior and post-failure characteristics. Thus, it is imperative to conduct further research in this field to better understand these complex dynamics.

Downhill progressive landslides hazard assessment: A simple framework for the prediction of triggering thresholds and failure modes

Probabilistic Framework for Quantifying Human Flight Failure Rate to Landslides

Estimating the Rainfall Threshold of a Deep-Seated Landslide by Integrating Models for Predicting the Groundwater Level and Stability Analysis of the Slope

Failure Mechanism and Early Warning of an Excavation-Induced Soil Landslide

Deep-Seated Slope Failures Induced by Inappropriate Cutting in China

Field measurement and failure forecast during the remediation of a failed cut slope

Early identification on failure mode of loess landslide: insight from case study and physical model experiment

Modelling rainfall-induced landslides from initiation of instability to post-failure

A thermo-poro-mechanical model for catastrophic landslides under unsaturated conditions

Probabilistic Prediction of Rainfall-Induced Slope Failure Using A Mechanics-Based Model

Landslide Hazard Prediction Based on UAV Remote Sensing and Discrete Element Model Simulation—Case from the Zhuangguoyu Landslide in Northern China

Early warning model and model test verification of rainfall-induced shallow landslide

3D probabilistic landslide run-out hazard evaluation for quantitative risk assessment purposes

A Physically Based Model for the Sequential Evolution Analysis of Rainfall‐Induced Shallow Landslides in a Catchment

Techniques, advances, problems and issues in numerical modelling of landslide hazard

Theoretical research of Stand Error of Mean Coupling Markov chain models for early warning of landslide displacement rates: A case study of human-induced landslide in Inner Mongolia (Northern China)

Towards hydrometeorological thresholds of reservoir-induced landslide from subsurface strain observations

A new interpretable prediction framework for step-like landslide displacement

Time-dependent probabilistic evaluation of rainstorm-induced shallow landslides considering influence of impermeable bedrock

An Infinite Slope Model Considering Unloading Joints for Spatial Evaluation of Coseismic Landslide Hazards Triggered by a Reverse Seismogenic Fault: A Case Study of the 2013 Lushan Earthquake

From scenario-based seismic hazard to scenario-based landslide hazard: rewinding to the past via statistical simulations