Abstract:Significant endeavours have been undertaken to advance the development of eco-friendly, abundant, cost-effective, and high-performance cathode materials for lithium-ion batteries. Among the various contenders for next-generation energy storage systems, spinel LiNi 0.5 Mn 1.5 O 4 has emerged as a leading high-voltage cathode candidate, owing to its aforementioned benefits. Nonetheless, the widespread adoption of LNMO-based lithium-ion batteries is substantially impeded by the electrochemical instability of conventional carbonate electrolytes above 4.5 V. High-voltage cycling of such batteries results in rapid capacity degradation and metal-ion dissolution from the LNMO electrode into the electrolyte, particularly at elevated temperatures, further causing deposition of metal-ions on anode electrode. Therefore, stabilizing the electrode/electrolyte interface is crucial to achieve improved electrochemical performance of the Li-ion cell at high voltages. The utilization of sacrificial electrolyte additives is regarded as a straightforward and efficacious method to accomplish this objective. These additives form a protective layer on the cathode surface, mitigating electrolyte decomposition and transition metal-ion dissolution and deposition on anode’s surface. Various additives facilitating high-voltage cathode materials have been documented, encompassing fluorides and sulfonates. However, borate salt-containing additives are particularly promising within this context. In the present study, we endeavour to elucidate the surface modifications transpiring on the electrode’s surface when minute quantities of borate-based salt are employed as an additive in the conventional EC:EMC electrolyte for high-voltage operation. We explored the impact of the additive salt in a standard LiPF 6 -EC/EMC base electrolyte on the discharge capacity and rate performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite based Li-ion cell. The electrochemical behaviour, morphological behaviour, and electrode-electrolyte interphase layer stability on the electrode were meticulously examined using high-resolution transmission electron microscopy (HR-TEM), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). These characterisations conformed the presence of an electrode-electrolyte interface forming a thin-layer via the sacrificial decomposition of the utilised additive. The introduction of this salt exhibits favourable effects on enhancing the electrochemical performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite in high-voltage lithium-ion batteries. Notably, the utilised additive excels in mitigating irreversible capacity loss and reducing cycling fade, as it preferentially decomposes and forms a conductive, protective film that impedes subsequent electrolyte decomposition, thereby substantially enhancing cell performance.

Inclusion of Anion Additives in the Inner Solvation Shell to Regulate the Composition of Solid Electrolyte Interphase

Anionic Additive-Integrated Electrolyte Therapy: Enhancing High-Voltage Stability and Performance in Lithium-Ion Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Highly Fluorinated and Boron Containing Anion Derived Stable Anode and Cathode Interfaces for Long Cycle and High Voltage Sodium Metal Batteries

Solvation-enhanced electrolyte on layered oxide cathode tailoring even and stable CEI for durable sodium storage

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries.

A New Anion Receptor for Improving the Interface Between Lithium- and Manganese-Rich Layered Oxide Cathode and the Electrolyte

Improved Interface Construction on Anode and Cathode for Na‐Ion Batteries Using Ultralow‐Concentration Electrolyte Containing Dual‐Additives

Electrolyte Design for High‐Voltage Lithium‐Metal Batteries with Synthetic Sulfonamide‐Based Solvent and Electrochemically Active Additives

Double additive electrolyte solvation engineering to achieve long cycle and high capacity sodium-ion battery

Solvent Reorganization and Additives Synergistically Enable High-Performance Na-Ion Batteries

Electrolyte Design with Dual -C≡N Groups Containing Additives to Enable High-Voltage Na3V2(PO4)2F3-Bas Ed Sodium-Ion Batteries

Ion-Solvent Chemistry-Inspired Cation-Additive Strategy to Stabilize Electrolytes for Sodium-Metal Batteries

Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode

A Dual-Function Additive to Regulate Nucleation Behavior and Interfacial Chemistry for Ultra-Stable Na Metal Anodes beyond One Year

Efficient Anion Solvation Modulation in Carbonate Electrolytes Enables High-Voltage Lithium Metal Batteries

Enhancing High‐Voltage LNMO Cathode Performance in Li‐Metal Batteries Via Anionic Electrolyte Additive‐Integrated CEI Engineering

Rationalizing Na-ion solvation structure by weakening carbonate solvent coordination ability for high-voltage sodium metal batteries

A weakly coordinating-intervention strategy for modulating Na+ solvation sheathes and constructing robust interphase in sodium-metal batteries

Improving the interfacial stability of Li1.2Mn0.54Ni0.13Co0.13O2 cathode and Li metal anode via dual electrolyte additives synergistic effect

Leveraging Cation Identity to Engineer Solid Electrolyte Interphases for Rechargeable Lithium Metal Anodes