Abstract:Fillers have been widely used in natural rubber (NR) products. They are introduced to serve as a strategy for modifying the final properties of NR vulcanizates. Silica and calcium carbonate (CaCO3) are among the fillers of choice when the color of the products is concerned. In this case, a special focus was to compare the vulcanizing efficiency of NR filled with two different filler types, namely nano-sized silica and micrometer-sized CaCO3. This study focused on the effects of the loading level (10–50 parts per hundred parts of rubber, phr) on the final properties and structural changes of NR composites. The results indicated that increased filler loading led to higher curing torques and stiffness of the rubber composites irrespective of the type of filler used. The better filler dispersion was achieved in composites filled with CaCO3 which is responsible for less polarity of CaCO3 compared to silica. Good filler distribution enhanced filler–matrix interactions, improving swelling resistance and total crosslink density, and delaying stress relaxation. The modulus and tensile strength of both composites also improved over the content of fillers. The CaCO3-filled composites reached their maximum tensile strength at 40 phr, exceeding, by roughly 88%, the strength of an unfilled sample. Conversely, the maximum tensile strength of silica-filled NR was at 20 phr and was only slightly higher than that of its unfilled counterpart. This discrepancy was ascribed to the stronger rubber–filler interactions in cases with CaCO3 filler. Effective rubber–filler interactions improved strain-induced crystallization, increasing crystallinity during stretching and reducing the strain at which crystallization begins. In contrast, large silica aggregates with poor dispersion reduced the overall crosslink density, and degraded the thermomechanical properties, tensile properties, and strain-induced crystallization ability of the NR. The results clearly indicate that CaCO3 should be favored over silica as a filler in the production of some rubber products where high performance was not the main characteristic.

Influence of ionic liquid on rheological behaviors of candle soot and cellulose nanocrystal filled natural rubber nanocomposites

Effects of ionic liquid on cellulosic nanofiller filled natural rubber bionanocomposites

Synergistic impact of ionic liquid on interfacial interaction and viscoelastic behaviors of silica filled nitrile butadiene rubber nanocomposites

Effect of ionic liquid on structure and properties of carbon black filled natural rubber vulcanizates

Influence of Ionic Liquids on Structure and Rheological Behaviors of Silica-Filled Butadiene Rubber

Effect of ionic liquid modified carbon nanotubes on the properties of nitrile butadiene rubber and nitrile butadiene latex nanocomposites

Enhancing properties of natural rubber nanocomposites with hybrid fillers and ionic liquid

Influence of Fillers and Ionic Liquids on the Crosslinking and Performance of Natural Rubber Biocomposites

Bromide and Chloride Ionic Liquids Applied to Enhance the Vulcanization and Performance of Natural Rubber Biocomposites Filled with Nanosized Silica

Rheological and Mechanical Properties of Silica/Nitrile Butadiene Rubber Vulcanizates with Eco-Friendly Ionic Liquid

Silylation of Cellulose Nanocrystals and Their Reinforcement of Commercial Silicone Rubber

Influence of Ionic Liquids on Rheological Behaviors of Polyisoprene Rubber/silica Compounds

Linear Rheology of Natural Rubber Compounds Filled with Silica, Short Nylon Fiber or Both

Effects of the surface chemical groups of cellulose nanocrystals on the vulcanization and mechanical properties of natural rubber/cellulose nanocrystals nanocomposites

An ionic liquid crystal functionalized nanocellulose lubricant additives

Investigating the Effect of Nano-Crystalline Cellulose in Nitrile Butadiene Rubber Matrix for Improved Thermo-Mechanical Properties

Mechanical, thermal properties and curing kinetics of liquid silicone rubber filled with cellulose nanocrystal

Comparative Investigation of Nano-Sized Silica and Micrometer-Sized Calcium Carbonate on Structure and Properties of Natural Rubber Composites

Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of natural rubber compounds

The effect of modified carbon black and nano-silica, individually and in combination, on the curing, mechanical, and dynamical properties of butyl rubber (IIR)

Thermo-soil weathering and life cycle assessment of carbon black, silica and cellulose nanocrystal filled rubber nanocomposites