Abstract:The 3-D shape measurement of high-dynamic-range (HDR) scenes based on structured light projection is challenging because the conventional projection without considering the reflection distribution of the tested surface usually causes over-exposure and over-dark areas simultaneously in the captured images, which will lead to the failure or low accuracy of 3-D reconstruction. In this article, we propose a novel HDR 3-D surface measurement method based on adaptive speckle projection with fully considering the reflection distribution. An efficient segmentation-based mapping strategy is established to speed up the generation of adaptive speckle patterns, which segments the estimated mask with optimal projection intensity into multiple subregions by the eight-connected standard to raise mapping accuracy and project gray-coded and sinusoidal fringe patterns to build the pixelwise mapping relationship between binocular cameras and the projector for each subregion, respectively. Then the pixelwise intensity of projected speckle patterns can be accurately adjusted according to optimal intensity. The generated adaptive speckle pattern is used to scan the tested object, and high signal-to-noise-ratio (SNR) speckle images can be obtained for accurate and complete 3-D measurement. Experimental results verify that the point cloud produced by our method has obvious advantages compared with the traditional methods in terms of measurement accuracy, whose coverage is as large as 92.26% and the average distance (AD) relative to ground truth (GT) is as low as 0.128 mm. Meanwhile, the number of projected patterns for mapping is decreased by a third compared with the widely used mapping strategy.

Adaptive Pixel-by-Pixel Modulated 3-D Morphometry Based on Digital Micromirror Device

Digital micromirror device-based laser-illumination Fourier ptychographic microscopy.

Diffraction Phase Microscopy Realized with an Automatic Digital Pinhole

Reflex Spatial Light Modulator Based on Micromirror Array Device

Panoramic Three-Dimensional Optical Digitization System Assisted by a Bi-Mirror.

Phase Imaging Based on Random Coding Modulation of Digital Micro-Mirror Device

High-Resolution Dmd-Fpm System Based On Ring Pattern Phase Retrieval Algorithm

Quantitative Phase Imaging Based on Wavefront Correction of a Digital Micromirror Device

Digital Micromirror Device-Based Common-Path Quantitative Phase Imaging

Distribution Retrieval of Both Depth and Reflectivity in 3-D Objects Via Using Modulated Single Pixel Imaging

High-Dynamic-Range 3-D Shape Measurement With Adaptive Speckle Projection Through Segmentation-Based Mapping

Digital Micromirror Device-Based Two-Photon Microscopy for Three-Dimensional and Random-Access Imaging

Pixel-wise Phase Map Fusion Technique for High Dynamic Range 3-D Shape Measurement

Numerical Simulation Effect of Dmd Spatio-Temporal Characteristic on Phase Measuring Profilometry

Highly dynamic surface three-dimensional shape measurement technology that combines the phase-shift method and line-shift Gray code

Design of a High-Frame-Rate and Large-Grayscale Simulation Projection System Based on Digital Micromirror Devices

DMD-based Pure-Phase Superpixel Method for Digital Holography

Complex-Amplitude Holographic Projection With a Digital Micromirror Device (DMD) and Error Diffusion Algorithm

High-speed Auto-Polarization Synchronization Modulation Three-dimensional Structured Illumination Microscopy

Three-Dimensional Single-Pixel Compressive Reflectivity Imaging Based On Complementary Modulation

High dynamic range structured illumination microscopy based on per-pixel coding