A Constant Current Digital Control Method for Primary-Side Regulation Active-Clamp Flyback Converter

Chong Wang,Daying Sun,Xiang Zhang,Jiayi Hu,Wenhua Gu,Sang Gui

DOI: https://doi.org/10.1109/tpel.2020.3041602

IF: 5.967

2021-06-01

IEEE Transactions on Power Electronics

Abstract:Constant current controlled flyback converter is widely used in low power applications for its simple structure and low cost. In order to further improve the output power and the efficiency, active-clamp flyback converter with soft-switching technique is always used. To avoid the nonlinearity and temperature drift of opto-coupler in the feedback circuit, a constant current digital control method is proposed for a primary-side regulation active-clamp (PSRAC) flyback converter in this article. Soft-switching technique is realized in discontinuous conduction modulation mode with a modified active-clamp technique. To compensate the nonlinearity of the secondary diode current with primary-side regulation, a new output current estimation algorithm is put forward based on the charge balance principle. The output current is predicted from primary current and the auxiliary winding voltage, and constant output current control is realized with primary peak current control method. The cost is low as only one low speed digital-to-analog converter, three comparators and a digital controller are required. The proposed control scheme was verified by a field-programmable gate array controlled 5.4–10.8 V/1.80 A PSRAC flyback converter. The output current accuracy is within in 1.2% in different input and output condition and the peak efficiency is improved by 3.6% after active-clamp technique is used.

engineering, electrical & electronic