Abstract:A parallel direct-forcing fictitious domain method is employed to perform fully resolved numerical simulations of turbulent channel flow laden with finite-size particles. The effects of the particle-fluid density ratio on the turbulence modulation in the channel flow are investigated at the friction Reynolds number of 180, the particle volume fraction of 0.84%, and the particle-fluid density ratio ranging from 1 to 104.2. The results show that the variation of the flow drag with the particle-fluid density ratio is not monotonic, with a larger flow drag for the density ratio of 10.42, compared to those of unity and 104.2. A significant drag reduction by the particles is observed for large particle-fluid density ratios during the transient stage, but not at the statistically stationary stage. The intensity of particle velocity fluctuations generally decreases with increasing particle inertia, except that the particle streamwise root-mean-square velocity and streamwise-transverse velocity correlation in the near-wall region are largest at the density ratio of the order of 10. The averaged momentum equations are derived with the spatial averaging theorem and are used to analyze the mechanisms for the effects of the particles on the flow drag. The results indicate that the drag-reduction effect due to the decrease in the fluid Reynolds shear stress is counteracted by the drag-enhancement effect due to the increase in the total particle stress or the interphase drag force for the large particle-inertia case. The sum of the total Reynolds stress and particle inner stress contributions to the flow drag is largest at the density ratio of the order of 10, which is the reason for the largest flow drag at this density ratio. The interphase drag force obtained from the averaged momentum equation (the balance theory) is significantly smaller than (but agrees qualitatively with) that from the empirical drag formula based on the phase-averaged slip velocity for large density ratios. For the neutrally buoyant case, the balance theory predicts a positive interphase force on the particles arising from the negative gradient of the particle inner stress, which cannot be predicted by the drag formula based on the phase-averaged slip velocity. In addition, our results show that both particle collision and particle-turbulence interaction play roles in the formation of the inhomogeneous distribution of the particles at the density ratio of the order of 10.

Synergistic effect of ribs and particles on flow and heat transfer in channels using the CFD-DEM-IBM method

Interface-resolved Numerical Simulations of Particle-Laden Turbulent Flows in a Vertical Channel Filled with Bingham Fluids

Enhanced heat dissipation of ribbed channels based on the coupling optimization of multiple structural parameters

Effects of Particle-Fluid Density Ratio on the Interactions Between the Turbulent Channel Flow and Finite-Size Particles.

Numerical study of the effects of nanorod aspect ratio on Poiseuille flow and convective heat transfer in a circular minichannel

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Investigating Enhanced Convection Heat Transfer in 3D Micro-Ribbed Tubes Using Inverse Problem Techniques

Computational study of rib shape and configuration for heat transfer and fluid flow characteristics of microchannel heat sinks with fan-shaped cavities

Improved Modelling of Interfacial Terms in the Second-Moment Closure for Particle-Laden Flows Based on Interface-Resolved Simulation Data

Effect of Ribs on Heat Transfer and Pressure Drop in a U-Bend Channel With Double-Layer, Dome-Shaped Turning Vanes

Experimental and Numerical Investigation of Convection Heat Transfer in Channels with Different Types of Ribs

Heat Transfer and Hydrodynamics in Stirred Tanks with Liquid-Solid Flow Studied by CFD–DEM Method

Scale effect of micro ribs on the turbulent transport in an internal cooling channel

Enhancement of Laminar Flow Heat Transfer with Single/double-Inclined Ribs for Unilaterally-Heated Channel

Numerical Simulation on Heat Transfer Augmentation by Using Innovative Hybrid Ribs in a Forward-Facing Contracting Channel

Investigation of particle deposition efficiency enhancement in turbulent duct air flow by surface ribs with hybrid-size ribs

Efficient Heat Transfer Augmentation in Channels with Semicircle Ribs and Hybrid Al2O3-Cu/Water Nanofluids

Heat transfer enhancement of nanofluids in concentric cylindrical heat exchanger

A compressible semi-resolved computational fluid dynamics-discrete element method coupling model for fluid–solid systems with heat transfer

Heat Transfer and Fluid Flow Characteristics of Microchannel with Discrete Double Inclined Ribs on Sidewalls

Effect Of Particle Diameter On Forced Convective Heat Transfer In A Channel Filled With Solid Particles Using A Non-Thermal Equilibrium Model