Abstract:A novel bio-based benzoxazine resin (phenolphthalein-furfuramine-benzoxazine , PTL-F-BOZ) , used bio-based furfurylamine , phenolphthalein , and paraformaldehyde as raw materials , was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR) , nuclear magnetic resonance (H-1 NMR and C-13 NMR) . The curing , thermal and flame retardant properties were analyzed by differential scanning calorimetric (DSC) , thermogravimetric analyzer (TG) , limiting oxygen index (LOI) , vertical burning test, microscale combustion calorimetry (MCC) , cone calorimeter(Cone) and scanning electron microscope (SEM) . The DSC curve of PTL-F-BOZ showed a two-stage curing with two maxima at 224 and 251 degrees C respectively, and had lower curing temperature than that of the traditional fossil-based bisphenol benzoxazine bisphenol A-aniline benzoxazine (bisphenol A-aniline-benzoxazine , BPA-A-BOZ) . The presence of the furan ring in the furfurylamine increased the cross-linking density of polymer, retarded the rearrangement reaction from the phenoxy structure to the phenol structure, and resulted in two curing peaks in the DSC curve of PTL-F-BOZ. Under nitrogen and air atmospheres, the temperatures of 5% mass loss (T-5%) for PPTL-F-BOZ resin were 380 and 370 degrees C , respectively and the residual chars at 800 degrees C were 63. 0% and 10. 5% , respectively. Compared with PBPA-A-BOZ resin, PPTL-F-BOZ resin both possessed higher T-5% and residual char of 800 degrees C. From the DTG curve , the maximum mass loss rates of two decomposition stage (Peak 1 and Peak 2 values) of PPTL-FBOZ resin were 0. 67%/min and 3. 28%/min, which were only 7. 38% and 63. 44% of PBPA-A-BOZ (9. 07%/min and 5. 17%/min) under nitrogen atmosphere , and those were also the same under air atmosphere. LOI of PPTL-F-BOZ resin was 36. 2%, which was higher than that of PBPA-A-BOZ resin. Meanwhile, in the UL-94 test, PPTL-F-BOZ resin extinguished quickly and released less smoke during combustion process, and the original morphology was kept well and a stable carbon layer was formed after burning. Its first ignition time(t(1)) and second ignition time(t(2)) were 1. 4 and 8. 5 s , respectively , far smaller than the maximum permissible values of 10 s, and a UL94 V-0 rating was also achieved. Hence, PPTL-F-BOZ resin showed excellent thermal and flame retardant properties.

Improving poly(lactic acid) fire performances via blending with benzoxazine

Synthesis and Properties of a Novel Bio-based Benzoxazine

Thermal, Crystalline and Mechanical Properties of Flame Retarded Poly(lactic Acid) with a PBO-like Small Molecule - Phenylphosphonic Bis(2-aminobenzothiazole)

Optimizing mechanical performance in 3D printing through a benzoxazine monomer blend photosensitive resin formulation

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure-Properties Correlation for Reactive Processing

The fire performance of polylactic acid containing a novel intumescent flame retardant and intercalated layered double hydroxides

Enhancement of Flame Retardancy and Mechanical Properties of Polylactic Acid with a Biodegradable Fire-Retardant Filler System Based on Bamboo Charcoal

Flame Retardant Poly (lactic Acid) Biocomposites Based on Azo‐boron Coupled 4,4′‐sulfonyldiphenol and Its Combination with Calcium Lignosulfonate—crystalline and Mechanical Properties

Synthesis and Application of Synergistic Azo-Boron-bpa / Polydopamine As Efficient Flame Retardant for Poly(lactic Acid)

Development of Flame-retardant Thermosetting Poly (Lactic acid) (PLA) and Its Curing Kinetics

High performance poly(lactic acid)/poly(ether-block-amide) blend-based bionanocomposites containing carbon nanotubes and/or organoclay

Manipulating Interphase Reactions for Mechanically Robust, Flame-Retardant and Sustainable Polylactide Biocomposites

Valorization of Industrial Lignin as Biobased Carbon Source in Fire Retardant System for Polyamide 11 Blends

Combustion and Pyrolysis Behaviors of Flame Retardant Poly (lactic Acid) Composites Containing Phosphaphenanthrene and Maleimide Molecules

Achieving simultaneously toughening and flame-retardant modification of poly(lactic acid) by in-situ formed cross-linked polyurethane and reactive blending with ammonium polyphosphate

A Triazine-Based Hyperbranched Char-Forming Agent for Efficient Intumescent Flame Retardant Poly(lactic Acid) Composites

Use of crosslinking agent to produce high‐performance PLA/EVA blends via reactive processing

Preparation and Mechanism of Toughened and Flame-Retardant Bio-Based Polylactic Acid Composites

Enhancing the comprehensive performance of bisphenol A epoxy resin via blending with a bio-based counterpart

Improvement of rheology and mechanical properties of PLA/PBS blends by in-situ UV-induced reactive extrusion