Abstract:Polymeric dielectric composites have been widely used in the fields of sensing and energy storage fields because of their excellent properties. However, the performance of dielectric composites is not sufficiently aligned with the requirements of application due to low thermal conductivity. Therefore, the investigations of the new methods as the design of structure and modification of the fillers to prepare excellent comprehensive performance of materials have attracted great attention. In this work, Poly(vinylidene fluoride) (PVDF) is used as matrix to prepare dielectric materials due to its high dielectric permittivity and favorable flexibility. Boron nitride (BN) with high thermal conductivity and a wide band gap is adopted as fillers. Meanwhile, the modified BN (m-BN) was prepared by coating with polydopamine (PDA) to improve the compatibility between the matrix and the fillers. The multi-layer polymeric composites based on PVDF and m-BN was fabricated via layer by layer spin coating technique. The morphology of fracture surface of PVDF/m-BN composites was investigated by scanning electron microscope. Clear interfaces can be observed in the PVDF/m-BN composites. The influence of both structures and m-BN concentration on the dielectric properties and thermal conductivity of nanocomposites were also discussed. Compared with single-layer, multi-layer exhibited obvious improvement in dielectric constant. The dielectric constant of sandwich-layer nanocomposites with 10 wt% m-BN loading reached 16, which is 30% higher than that of single layer. These enhancements may be attributed to Maxwell-Wagner interfacial polarization, which was generated from the multi-layer structure. In addition, the thermal conductivity of sandwich layer is 4 folds of single layer and the breakdown strength of the composites has increased by 30% due to the well-organized m-BN. Therefore, this works offers a new method for the potential usage of sandwich-structural PVDF nanocomposites in electric power field.

High Electrical and Mechanical Properties Obtained in a Polyimide‐Based Nanocomposite with Sandwich Structure via Multidimensional Design

Preparation and imidization of polyimide composites filled with boron nitride

High Electrical and Mechanical Properties Obtained in A Polyimide Based Nanocomposite with Sandwich Structure via Multi‐Dimensional Design

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Polyimide‐Based Composite Film Synergistically Modulated Via a Nano–Micro Multidimensional Filler System Toward Insulation Flexible Device Applications

The fabrication and electrical properties of polyimide/boron nitride nanosheets composite films

Fabrication and Dielectric Characterization of Advanced BaTiO3/Polyimide Nanocomposite Films with High Thermal Stability

Properties and Application of Polyimide‐based Composites by Blending Surface Functionalized Boron Nitride Nanoplates

Microstructure and Electrical Properties of Polyimide-Based Composites Reinforced by High-Aspect-ratio Titanium Oxide Nanowires

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Vacuum filtration-assisted design of hierarchical structure in polyimide-BN composite films: Toward enhanced thermal conductivity, low dielectric and electrical insulation

Polyimide Composites with Fluorinated Graphene and Functionalized Boron Nitride Nanosheets for Heat Dissipation

Polyimide/BaTiO3/NiNWs composites with enhanced dielectric properties

Enhanced Interfacial and Dielectric Performance for Polyetherimide Nanocomposites through Tailoring Shell Polarities

Improved energy storage performance of polyimide nanocomposites by constructing the meso- and macroscopic interfaces

Preparation of Polyimide Composites Reinforced with Oxygen Doped Boron Nitride Nano-Sheet As Multifunctional Materials

The Property and Microstructure Study of Polyimide/nano-Tio2 Hybrid Films with Sandwich Structures

Research Update: Polyimide/CaCu3Ti4O12 Nanofiber Functional Hybrid Films with Improved Dielectric Properties

Sandwich-structural PVDF Nanocomposites with High Thermal Conductivity and Excellent Dielectric Properties

Enhanced out-of-plane thermal conductivity of polyimide composite films by adding hollow cube-like boron nitride

Preparation and properties of polyimide dielectric nanocomposites containing polyvinylpyrrolidone chemically functionalized barium titanate by in‐situ synthesis compounding