Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Application-oriented Characterization and Analysis of Core Materials Under Medium-Frequency Condition

Temperature Dependence of Powder Cores Magnetic Properties for Medium-Frequency Applications

Magnetic property measurement and analysis of high-frequency soft magnetic materials under non-sinusoidal excitation considering temperature effect

High frequency magnetic loss characteristic analysis and calculation of magnetostrictive Tb-Dy-Fe alloys under multivariable comprehensive operation conditions

Analysis of High Frequency Power Loss of MnZn Power Ferrite

Performance Factor Comparison of Nanocrystalline, Amorphous, and Crystalline Soft Magnetic Materials for Medium-Frequency Applications

Temperature Dependence of Core Losses at High Frequency for Mnzn Ferrites

Effects of magnetic domain morphology on the magnetic spectrum and high‐frequency core losses of MnZn ferrites

Comparative Analysis of Core Loss Calculation Methods for Magnetic Materials Under Nonsinusoidal Excitations

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

Temperature Characteristics of Core Losses for HfO2 Doped Manganese-Zinc Ferrites

Core loss measurement and comparative analysis for soft magnetic materials under complex non-sinusoidal excitations

Modeling of Fe-Based Soft Magnetic Materials for Multiphysical Analysis of Medium-Frequency Transformers

Effects of Fe2+ content in raw materials on Mn–Zn ferrite magnetic properties

Design and Analysis of a Novel Two-Dimensional High Frequency Magnetic Tester for Nanocrystalline Alloy Material

Core-loss behavior of Fe-based nanocrystalline at high frequency and high temperature

A Study of Flux Distribution and Impedance in Solid and Laminar Ferrite Cores

High Frequency Magnetic Core Loss Study

Effect of low magnetic field heat treatment process on grain sizes and soft magnetic properties of Finemet cores

Novel magnetic core materials impact modelling and analysis for minimization of RF heating loss

Estimation of Energy Losses in Nanocrystalline FINEMET Alloys Working at High Frequency