Enhanced Photocatalytic Activity of V2C MXene-Coupled ZnO Porous Nanosheets with Increased Surface Area and Effective Charge Transfer

Weibing Zhou,Lilong Sun,Kang Li,Shouqin Tian
DOI: https://doi.org/10.3390/ma17112529
IF: 3.4
2024-05-25
Materials
Abstract:Photocatalysis performs excellently when degrading organic pollutants, but the photocatalytic degradation rate is not high for most photocatalysts due to their narrow sunlight adsorption range and high recombination rate of electron hole pairs. Herein, we use V2C-MXene with a wide sunlight adsorption range to couple ZnO porous nanosheets and form ZnO/MXene hybrids using a facile electrostatic self-assembly method. The ZnO/MXene hybrids acquired demonstrated improved photochemical efficiency in breaking down methylene blue (MB) when contrasted with porous ZnO nanosheets. The degradation rate of MB reached 99.8% under UV irradiation for 120 min after the ZnO/MXene hybrid formation, while 38.6% was attained by the ZnO porous nanosheets. Moreover, photodegradation rate constants (k) were calculated as 3.05 × 10−3 and 5.42 × 10−2 min−1 for ZnO porous nanosheets and ZnO/MXene hybrids, respectively, indicating that the photodegradation performance was enhanced by 17.8 times after the modification of V2C. This was probably because the modification of V2C can increase the specific surface area to provide more sites for MB adsorption, widen the sunlight adsorption range to produce good photothermal effect, and facilitate the transfer of photogenerated carriers in ZnO to promote the reaction of more photogenerated carriers with MB. Hence, this work offers a simple approach to creating effective photocatalysts for breaking down organic contaminants.
materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter
What problem does this paper attempt to address?
### Problems the paper attempts to solve This paper aims to solve several key problems existing in traditional photocatalysts when degrading organic pollutants: 1. **Narrow solar light absorption range**: Most photocatalysts can only absorb ultraviolet light, and their absorption ability for visible light is weak, which limits their application efficiency under natural lighting conditions. 2. **High electron - hole pair recombination rate**: Photo - generated electrons and holes are easily and rapidly recombined on the catalyst surface, resulting in a low photocatalytic degradation rate. 3. **Limited specific surface area**: Traditional photocatalysts such as ZnO nanosheets have a small specific surface area and provide fewer adsorption sites, which affects the efficiency of the photocatalytic reaction. To overcome these problems, the author proposes a new method, that is, using V₂C - MXene with a wide solar light absorption range to compound with ZnO porous nanosheets, and preparing ZnO/MXene hybrid materials by electrostatic self - assembly method. This method not only increases the specific surface area of the material but also effectively promotes the transfer of photo - generated carriers, thereby significantly improving the ability to photocatalytically degrade organic pollutants. ### Main improvements and results 1. **Enhanced photocatalytic activity**: Under ultraviolet light irradiation, the degradation rate of methylene blue (MB) by ZnO/MXene hybrid materials reaches 99.8%, while the degradation rate of pure ZnO porous nanosheets is only 38.6%. 2. **Increased photodegradation rate constant**: The photodegradation rate constant of ZnO/MXene hybrid materials is 5.42 × 10⁻² min⁻¹, while the photodegradation rate constant of pure ZnO porous nanosheets is only 3.05 × 10⁻³ min⁻¹, indicating that the photocatalytic performance is improved by about 17.8 times. 3. **Mechanism analysis**: - **Increased specific surface area**: The introduction of V₂C - MXene increases the specific surface area of the material and provides more adsorption sites. - **Broadened solar light absorption range**: V₂C - MXene has a wide solar light absorption range and can produce a good photothermal effect. - **Effective carrier transfer**: The introduction of V₂C - MXene promotes the transfer of photo - generated carriers in ZnO, reduces the recombination of electron - hole pairs, and thus improves the efficiency of the photocatalytic reaction. Through these improvements, this study provides a simple and effective method for preparing highly efficient photocatalysts for degrading organic pollutants.