Abstract:Challenges remain concerning the development of rapid and low-cost adsorbents that combine good separation performance with high adsorption capacity, especially for CO2. Herein, we report for the first time a new polyethylene glycol templated synthesis method to obtain a nanocrystalline zeolitic imidazolate framework (n-ZIF-67) at room temperature in 5 min. The n-ZIF-67 nanoparticles were characterized using X-ray powder diffraction with Rietveld refinement (space group = I-43 m, a = 17.0545(4) Å), Fourier-transform infrared, transmission electron microscopy, thermogravimetric analysis, and N2 adsorption (Brunauer-Emmett-Teller) measurements and exhibited excellent properties, including a total pore volume of 0.86 cm3/g, a high surface area equal to 1891 m2/g, and 0.64 nm size ultramicropores.). The highly porous ZIF-67 nanoparticles were explored for the adsorption and desorption of CH4, CO2, and N2 gases at pressures up to 40 bar and isotherm temperatures of 273, 298, 323, and 353 K. The adsorption isotherms revealed a high capacity for CO2 of 681 mg/g at 298 K and an adsorption enthalpy of 29.19 to 34.44 KJ/mol, in part linked to the ultramicroporous structure. The n-ZIF-67 particles exhibited gas uptake values for CH4 and N2 of 241 mg/g and 219 mg/g, respectively. As far as the authors are concerned, these are the highest capacities ever reported for zeolitic framework metal organic frameworks such as ZIF-67 and ZIF-8. The Langmuir adsorption isotherm was employed to obtain the maximum adsorption capacity, qm, and adsorption equilibrium constant, KL. The isosteric heat of adsorption data sheds light on a CO2 physisorption process. The n-ZIF-67 also exhibited high CO2/N2 and CO2/CH4 mixed gases selectivity, with the preferential adsorption of CO2 over N2 or CH4 confirmed by breakthrough experiments. The n-ZIF-67 with ultramicropores is therefore an effective new adsorbent for greenhouse gas capture with high CO2 gas selectivity over competing gases. Zeolitic framework MOFs merit further development as low-cost and easy-to-synthesize adsorbents to help address the pressing need to mitigate CO2 emissions.

Unusually large microporous HKUST-1 via polyethylene glycol-templated synthesis: enhanced CO2 uptake with high selectivity over CH4 and N2

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Anion Pillared Metal–Organic Framework Embedded with Molecular Rotors for Size-Selective Capture of CO2 from CH4 and N2

Constructing Randomly Lamellar HKUST–1@Clinoptilolite through Polyethylene Glycol—Assisted Hydrothermal Method and Coordinated Complexation for Enhanced Adsorptive Separation for CO2 and CH4

Shaping of HKUST-1 via Extrusion for the Separation of CO2/CH4 in Biogas

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Rationalizing the Efficiency of HKUST-1 for Capture and Biomimetic Sequestration of CO2

Preparation of porous CO 2 adsorbent with high amine-content matrix by unique emulsion template

Water-stable composite of HKUST-1 with its pyrolysis products for enhanced CO2 capture capacity

Copper benzene-1,3,5-tricarboxylate (HKUST-1) – graphene oxide pellets for methane adsorption

PEG-templated synthesis of ultramicroporous n-ZIF-67 nanoparticles with high selectivity for the adsorption and uptake of CO2 over CH4 and N2

Low-Hydrophilic HKUST−1/Polymer Extrudates for the PSA Separation of CO2/CH4

Controlling Pore Shape and Size of Interpenetrated Anion-Pillared Ultramicroporous Materials Enables Molecular Sieving of CO2 Combined with Ultrahigh Uptake Capacity

Preparation of highly water stable HKUST-1@Pyr composites for excellent CO2 capture capability and efficient separation of CO2/N2

Rational design of carbon materials with tailored pore structure for efficient separation of CH 4 /N 2 mixture

Increased CO 2 capture capacity via amino-bifunctionalized halloysite nanotubes adsorbents

Grafting Poly(ethyleneimine) on the Pore Surface of Poly(glycidyl Methacrylate-Trimethylolpropane Triacrylate) for Preparation of the CO2 Sorbent

Design of carbonized unidirectional polyimide aerogel for CO 2 capture: Effect of pore morphology/topology on CO 2 capture

Pore Space Partitioning MIL-88(Co): Developing Robust Adsorbents for CO2/CH4 Separation Featured with High CO2 Adsorption and Rapid Desorption

Nanoconfinement-driven energy-efficient CO2 capture and release at high pressures on a unique large-pore mesoporous carbon