Abstract:The ever-increasing silicon photovoltaics industry produces a huge annual production of silicon waste (2.03 × 105 tons in 2019), while lignin is one of the main waste materials in the traditional paper industry (7.0 × 107 tons annually), which lead to not only enormous wastage of resources but also serious environment pollution. Lithium-ion batteries (LIBs) are the dominating power sources for portable electronics and electric vehicles. Silicon (Si)-based material is the most promising anode choice for the next-generation high-energy-density LIBs due to its much higher capacity than the commercial graphite anode. Here, we proposed the use of these silicon and lignin waste as sustainable raw materials to fabricate high-capacity silicon/carbon (Si/C) anode materials for LIBs via a facile coprecipitation method utilizing electrostatic attracting force, followed by a thermal annealing process. The as-achieved Si/C composite featured an advanced material structure with micrometer-sized secondary particles and Si nanoparticles embedded in the carbon matrix, which could tackle the inherent challenges of Si materials, including low conductivity and large volume change during the lithiation/delithiation processes. As expected, the obtained Si/C composite displayed an initial charge capacity of 1016.8 mAh g–1, which was 3 times that of a commercial graphite anode in the state-of-the-art LIBs, as well as a high capacity retention of 74.5% at 0.2 A g–1 after 100 cycles. In addition, this Si/C composite delivered superior rate capability with a high capacity of 575.9 mAh g–1 at 2 A g–1, 63.4% of the capacity at 0.2 A g–1. The utilization of industrial Si and lignin waste provides a sustainable route for the fabrication of advanced high-capacity anode materials for the next-generation LIBs with high economic and environmental feasibility.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16865?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16865</a>.Additional experimental data including SEM, TEM, and HR-TEM images of Si–C and Si/C composite after cycles and EIS spectra of Si/C and pure Si before cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16865/suppl_file/am0c16865_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Green preparation of hierarchical porous C/SiOx composites from coal gangue as anodes for Li-ion batteries

Green Design of Si/SiO<sub>2</sub>/C Composites as High-Performance Anodes for Lithium-Ion Batteries

Turn "Waste" Into Wealth: MoO2@coal Gangue Electrocatalyst with Amorphous/Crystalline Heterostructure for Efficient Li–O2 Batteries

Enhanced TiO2/SiCx Active Layer Formed In Situ on Coal Gangue/Ti3C2 MXene Electrocatalyst as Catalytic Integrated Units for Efficient Li-O2 Batteries

Fe-N-C decorated fibrous network-wrapped biomass SiOx/C with gradient conductive structure for high performance Li-ion battery anodes

Facile Synthesis of SiOx/C Composite with Homogeneous Distribution of SiOx and Carbon As Anodes for Superior Lithium-Ion Batteries

Aluminothermic reduction synthesis of Si/C composite nanosheets from waste vermiculite as high-performance anode materials for lithium-ion batteries

In Situ Synthesis of Graphene‐Coated Silicon Monoxide Anodes from Coal‐Derived Humic Acid for High‐Performance Lithium‐Ion Batteries

A novel strategy for the synthesis of highly stable ternary SiOx composites for Li-ion-battery anodes

High-performance SiO/C/G Composite Anode for Lithium Ion Batteries

Simple preparation of Si/CNTs/C composite derived from photovoltaic waste silicon powder as high-performance anode material for Li-ion batteries

Recycling of Lignin and Si Waste for Advanced Si/C Battery Anodes

One-step synthesis of interface-coupled Si@SiOX@C from whole rice-husks for high-performance lithium storage

Facile synthesis of SiOx/C as high-performance anodes for lithium-ion batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Insight into the performance of the mesoporous structure SiOx nanoparticles anchored on carbon fibers as anode material of lithium-ion batteries

Preparation of SiO<sub>x</sub> -C composite materials with a reinforced concrete-like structure for lithium-ion batteries

Preparation of SiO/C anode materials for Li-ion batteries and its performance

Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes

Facile preparation of micron-sized silicon-graphite‐carbon composite as anode material for high-performance lithium-ion batteries

Unleashing the Potential: SiOx@GNs Composites for Superior Lithium-Ion Battery Anodes