Abstract:A time efficient and cost-effective laser-based surface texturing technique combining nanosecond laser ablation and chemical immersion treatment was developed for steel alloy to achieve enhanced corrosion resistance in marine atmospheric environment. Three different surface patterns were created by nanosecond laser ablation and the laser patterned samples were subsequently immersed in 1H,1H,2H,2H-perfluorooctyl silane (FOTS) solution to tune surface chemistry. Dual-scale surface structure was formulated on the laser-chemical treated surface, as confirmed by the scanning electron microscopy (SEM) and confocal laser scanning microscope analyses. X-ray photoelectron spectroscopy (XPS) analysis was conducted to validate that desired surface chemistry was achieved on the laser-chemical treated surface. The effect of surface pattern on several key surface functionalities, including surface wettability, corrosion resistance and chemical stability was systematically presented in this work. Firstly, it was demonstrated via wettability measurements that the laser-chemical treated surface achieved superhydrophobicity with a water contact angle of 158.9°. Secondly, electrochemical and NaCl deliquescence tests were conducted to determine the corrosion resistance of the laser-chemical treated surfaces in marine atmospheric environments. It was confirmed that the laser-chemical treated surface can prevent marine atmospheric corrosion induced by salt deliquescence. Furthermore, it was revealed by electrochemical test that the laser-chemical treated superhydrophobic surface exhibited distinctly better anti-corrosion performance. The experimental results showed that the corrosion rate for the laser-chemical treated surface with microgroove pattern is approximately 5.4% of the corrosion rate for the untreated surface, indicating significant improvement of corrosion resistance for the laser-chemical treated surface. Thirdly, the high water contact angle of 151.0° sustained on the laser-chemical treated surface after electrochemical tests helped confirm the improvement of its chemical stability in corrosion medium. These experimental findings clearly demonstrate the developed nanosecond laser-chemical treatment method can be very effective for fabrication of stable superhydrophobic metal surface as a barrier to marine atmospheric corrosion with enhanced corrosion resistance.

Nanosecond Laser Passivation Mechanism of Q235B Carbon Steel Surface

Enhance corrosion resistance of 304 stainless steel using nanosecond pulsed laser surface processing

Effect of Continuous Laser Cleaning Process Parameters on Surface Quality of Q235B Carbon Steel Rust Layer

Effect of Different Laser Parameters on Surface Physical Characteristics and Corrosion Resistance of 20 Steel in Laser Cleaning

Nanosecond Pulse Fiber Laser Blackening of Aluminum Alloy with Alumina Surface

Mechanism and characterization of nanosecond laser rust-removal on AH36 steel

Enhanced corrosion performance of S136 steel after nanosecond pulsed laser polishing

Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water

Effect of surface nanocrystallization produced by laser shock processing on the corrosion fatigue behavior of 300M steel

1 micrometer wavelength pulse fiber laser assisted black marking on the surface of aluminum oxide

Nanosecond Laser Coloration on Stainless Steel Surface

Nanosecond Laser Fabrication Of Superhydrophobic Surface On 316l Stainless Steel And Corrosion Protection Application

Surface properties of low alloy steel treated by plasma nitrocarburizing prior to laser quenching process

Fabricating Robust and Repairable Superhydrophobic Surface on Carbon Steel by Nanosecond Laser Texturing for Corrosion Protection

Femtosecond Laser Treatment for Improving the Corrosion Resistance of Selective Laser Melted 17-4PH Stainless Steel

Investigation of the Surface Integrity of Q345 Steel After Nd:YAG Laser Cleaning of Oxidized Mining Parts

Laser-chemical Treated Superhydrophobic Surface As a Barrier to Marine Atmospheric Corrosion

Dense Amorphous Passivation Layer Formed on Aluminum Alloy Surfaces by Femtosecond Laser-Assisted Oxygen-Rich Doping

Passivation Process in Quasi-Continuous Laser Derusting with Intermediate Pulse Width and Line-Scanning Method

Thermodynamic Analysis and Experimental Study of Masked Corrosion Protection of 304 Stainless Steel Processed with Nanosecond Pulsed Laser

Corrosion performance and microstructure of a Q370qENH weathering steel welded joint treated by the laser surface remelting method