Abstract:With the global trend of carbon reduction, high-speed maglevs are going to use a large percentage of the electricity generated from renewable energy. However, the fluctuating characteristics of renewable energy can cause voltage disturbance in the traction power system, but high-speed maglevs have high requirements for power quality. This paper presents a novel scheme of a high-speed maglev power system using superconducting magnetic energy storage (SMES) and distributed renewable energy. It aims to solve the voltage sag caused by renewable energy and achieve smooth power interaction between the traction power system and maglevs. The working principle of the SMES power compensation system for topology and the control strategy were analyzed. A maglev train traction power supply model was established, and the results show that SMES effectively alleviated voltage sag, responded rapidly to the power demand during maglev acceleration and braking, and maintained voltage stability. In our case study of a 10 MW high-speed maglev traction power system, the SMES system could output/absorb power to compensate for sudden changes within 10 ms, stabilizing the DC bus voltage with fluctuations of less than 0.8%. Overall, the novel SMES power compensation system is expected to become a promising solution for high-speed maglevs to overcome the power quality issues from renewable energy.
engineering, electrical & electronic,computer science, information systems,physics, applied
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to use superconducting magnetic energy storage (SMES) technology to compensate for voltage sags caused by the fluctuation of distributed renewable energy generation in the traction power supply system of high - speed maglev trains, thereby improving the power quality and stability of the traction system. Specifically, the paper proposes a new scheme for the traction power supply system of high - speed maglev trains. This scheme combines distributed renewable energy and the SMES system and aims to solve the following problems:
1. **Voltage Sag Problem**: Due to the intermittent and fluctuating characteristics of renewable energy, the DC bus voltage of the traction power supply system may experience an instantaneous drop, affecting the normal operation of the maglev train. The SMES system can quickly respond to these voltage fluctuations and stabilize the DC bus voltage by releasing the stored energy.
2. **Power Requirements during Acceleration and Braking**: During the acceleration of the maglev train, the load power of the linear traction motor will suddenly increase, causing the DC bus voltage to drop; during braking, the regenerative energy will cause the DC bus voltage to rise. The SMES system can quickly compensate or absorb these sudden power changes and maintain voltage stability.
3. **Improving Power Quality**: Through the fast response and high - power - density characteristics of the SMES system, the power quality of the traction power supply system can be significantly improved, reducing voltage and power fluctuations and improving the reliability and stability of the system.
To achieve the above goals, the paper analyzes in detail the topology, control strategy, and working principle of the SMES compensation system. By establishing a model of the maglev train traction power supply system, it verifies the effectiveness of the SMES system in suppressing voltage sags and stabilizing energy interaction. Specific technical details include:
- **Topology**: The SMES compensation system consists of a superconducting magnet, an H - bridge converter, and an output filter capacitor, installed between the DC bus, the input rectifier, and the output inverter.
- **Control Strategy**: A dual - loop control strategy is adopted, including a power loop and a voltage loop. In the constant - speed operation state, mainly single - loop voltage control is used; in the acceleration or braking state, a power - voltage dual - loop control is adopted to achieve a smooth transition.
- **Capacity Estimation**: According to the maximum compensation power of the system and the voltage sag requirements, the minimum and maximum operating currents and energy storage amounts of the SMES system are calculated.
Through these technical means, the SMES compensation system proposed in the paper is expected to be an effective solution to the power quality problems in the traction power supply system of high - speed maglev trains.