Abstract:In this paper, the substitution of different amounts of Zr for Ti in the hydrogen storage electrode alloy Mg35Ti10Ni55 has been carried out for the purpose of further improving the electrochemical performance of the electrode alloy. The electrochemical properties were tested on the purposely prepared Mg35Ti10−xZrxNi55 (x=1, 3, 5, 7, 9) electrode alloys. The results showed that all alloys substituted with Zr possessed a higher cycling capacity retention and a larger initial discharge capacity (except Mg35Ti1Zr9Ni55) than the original alloy Mg35Ti10Ni55. Among these alloys Mg35Ti5Zr5Ni55 exhibited the highest discharge capacity and cycling stability. It was found from X-ray Photoelectron Spectroscopy (XPS) surface analysis that the Zr content reduced the degree of oxidation of Mg. The higher the Zr content, the lower is the degree of oxidation of Mg. Auger electron spectroscopy (AES) analysis revealed that the thickness of the passive oxide film coating on the alloy surfaces became first reduced as the Zr content increased but subsequently became augmented as the Zr content exceeded 5 at.%. The study indicated that the corrosion inhibiting effect of Zr alone, without the presence of Ti was weak. The synergetic effect of Zr and Ti made the passive film more compact, less pervious and more protective than by Ti or Zr alone. The thickness of the passive film agreed well with the polarization resistance of the alloys obtained from electrochemical impedance spectroscopy (EIS) Nyquist diagrams, suggesting that the surface polarization resistance RP being closely related to the film thickness and the exchange current density on the surface of the alloy varied accordingly. The conclusion of this study is that 5 at.% Zr substitution in Mg35Ti10Ni55 leads to the formation on the surface of a good and thin passive film, which retards the corrosion of the alloy and at the same time leads to the least polarization resistance and highest exchange current in this series of alloys studied.

Enhancing electrochemical and passive behavior of Ti-based medium entropy alloys in proton exchange membrane water electrolysis anodic environment through Zr and Nb synergy

The effect of partial substitution of Zr for Ti on the electrochemical properties and surface passivation film of Mg35Ti10 - xZrxNi55 (x=1, 3, 5, 7, 9) electrode alloys

Electrochemical performance of metal nitride coated titanium bipolar plate for proton exchange membrane water electrolyser

Porous transport layers with low Pt loading having Nb–Ta alloy as interlayer for proton exchange membrane water electrolyzers

Corrosion behavior of metallic coatings on titanium bipolar plates of proton exchange membrane water electrolysis

Highly Conductive and Corrosion-Resistant NbN Coatings on Ti Bipolar Plate for Proton Exchange Membrane Water Electrolysis

Improving the performance of titanium bipolar plate in proton exchange membrane water electrolysis environment by nitrogen-chromium composite cathode plasma electrolytic deposition

The effect of partial substitution of Ti with Zr, Cr or V in the Mg35Ti10Ni55 electrode alloy on its electrochemical performance

Corrosion Resistance and Conductivity of Ta-Nb-N-Coated 316L Stainless Steel as Bipolar Plates for Proton Exchange Membrane Fuel Cells

Investigation on the performance of Pt surface modified Ti bipolar plates in proton exchange membrane water electrolyzer

Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell

Excellent anti-corrosion and conductivity of NbN coated on Ti bipolar plate by controlling N 2 flow rates

The Corrosion Behavior of TA1 and TC4 in Proton Exchange Membrane Water Electrolyzers

Corrosion Behavior and Conductivity of TiNb and TiNbN Coated Steel for Metallic Bipolar Plates

Zr2N2O Coating-Improved Corrosion Resistance for the Anodic Dissolution Induced by Cathodic Transient Potential

Effects of Passive Films on Corrosion Resistance of Uncoated SS316L Bipolar Plates for Proton Exchange Membrane Fuel Cell Application

Corrosion and interfacial contact resistance of nanocrystalline β-Nb2N coating on 430 FSS bipolar plates in the simulated PEMFC anode environment

Corrosion and Interfacial Contact Resistance of NiTi Alloy as a Promising Bipolar Plate for PEMFC

Corrosion-resistant and interfacial conductive AlTiVCrMo high-entropy alloy and (AlTiVCrMo)Nx high-entropy ceramics coatings for surface modification of bipolar plates in proton exchange membrane fuel cells

Improvement of Electric Conductivity and Corrosion-Resistance of Stainless Steel Bipolar Plates by Cr and Cr2N Coatings

Electrochemical Analysis of Polymer Membrane with Inorganic Nanoparticles for High-Temperature PEM Fuel Cells