A Reflectionless Circularly Polarized High-Gain Microstrip Filtering Antenna With Wideband Response

Vijoyatry Paul,Kirti Dhwaj
DOI: https://doi.org/10.1109/tap.2024.3397510
IF: 5.7
2024-06-12
IEEE Transactions on Antennas and Propagation
Abstract:A high-gain reflectionless circularly polarized (CP) filtering antenna is proposed. A quadrature hybrid coupler (QHC) is cascaded with two identical, mutually isolated, and orthogonally linearly polarized (LP) third-order filtering antennas to produce a CP response. Out-of-band reflections from the CP filtering antenna are dissipated through a matched load connected to the QHC's isolated port. Each of the two LP filtering antennas has two stub resonators and a patch resonator, coupled together. The square-shaped patch resonator is dual-fed and acts as a common radiating resonator for the two LP filtering antennas by utilizing its two orthogonal modes, and . The patch is backed with a defected air cavity to increase its gain and decrease its quality factor while keeping the feeds mutually isolated. The filtering antenna operates at 6.84 GHz with a 9.06-dBic peak gain, a wide 3-dB gain bandwidth of 15.79%, and an axial ratio (AR) below 3 dB in the gain passband. Moreover, a wideband reflectionless performance is obtained with −10-dB bandwidth of 34% that extends on both sides of the gain passband. Suppression over 29 dB is achieved beyond 35% of band-edge frequencies of the gain passband. In addition, the monotonically decreasing all-pole response provides low dispersion losses. The low-profile (0.064 ) structure can operate as a left-handed or a right-handed CP filtering antenna, interchangeably. The proposed reflectionless single-layered microstrip design assures easy, cheap manufacturing and compatibility with surface-mount devices.
telecommunications,engineering, electrical & electronic
What problem does this paper attempt to address?