Abstract:The deep borehole heat exchanger (DBHE) is a vital part in medium-depth geothermal heat pump system (MD-GHPs). In comparison to other forms of heat exchangers, the DBHE has the following outstanding advantages: the small footprints, the little damage to rock as well as the high efficiency. However, numerous DBHE models were fixed variable values such as flow rate or inlet fluid temperature and there were few studies combining the user heating load variation with the temperature fluctuation on the DBHE side. In order to fill this gap, a DBHE heat transfer model with dynamic building heating load constraint is developed. In this heat transfer model, the load boundary condition is the hourly flow rate and the difference in inlet and outlet water temperature, and the outlet water temperature is obtained through iteration. In addition, this model is validated by a building space heating experiment data in Harbin and guaranteed its correctness. The average heat exchange per meter at the coldest heating moment also ensures the viability of MD-GHPs, which is 141.5 W/m. A series of typical coordinates are used to analyze the effect of DBHE on the surrounding rock, and the concept of DBHE recommended insulation length are proposed. One single DBHE with 2000 m burial depth possesses a temperature effect radius of 13.0 m for one heating period. Besides, some critical conclusions are as follows: For the structural parameter, the recommended insulation length is 178 m. For the operating parameter, there is a minimum value for the total power consumption and 18 m 3 ·h −1 is the recommended optimal flow rate in this situation. For the geological parameter, raising the geothermal gradient can dramatically improve inlet fluid temperature (IFT) and outlet fluid temperature (OFT), and enhance the ability of DBHE to carry the building heating load. When maintaining the same IFT at the coldest moment, the geothermal gradient of 0.04°C·m −1 is 1.33 times more capable of carrying loads than the 0.03°C·m −1 . This paper can provide basis for a series of DBHE thermal performance in practical space heating engineering applications of MD-GHPs.

Thermal performance of medium-deep U-type borehole heat exchanger based on a novel numerical model considering groundwater seepage

Thermal recovery characteristics of rock and soil around medium and deep U-type borehole heat exchanger

An analytical heat transfer model for the mid-deep U-shaped borehole heat exchanger considering groundwater seepage

Influencing factors analysis for the long-term thermal performance of medium and deep U-type borehole heat exchanger system

Numerical Investigation on the Long-Term Heating Performance and Sustainability Analysis of Medium-Deep U-type Borehole Heat Exchanger System

Numerical Investigation on the Effects of Geological Parameters and Layered Subsurface on the Thermal Performance of Medium-Deep Borehole Heat Exchanger

Comprehensive thermal performance analysis and optimization study on U-type deep borehole ground source heat pump systems based on a new analytical model

Effects of Building Load Characteristics on Heating Performance of the Medium-Deep U-type Borehole Heat Exchanger Coupled Heat Pumps: A Coupled Dynamic Simulation

Numerical investigation of the deep borehole heat exchanger in medium-depth geothermal heat pump system for building space heating

Multifactor Optimization of Medium and Deep U-type Borehole Heat Exchanger Design Using Taguchi Method

Heat Transfer Performance of Deep Borehole Heat Exchanger with Different Operation Modes

Analytical model of heat transfer of U-shaped borehole heat exchanger under convolution theory and its optimal heat extraction analysis

Numerical investigation of vertical borehole heat exchanger heat transfer under coupled conditions of groundwater seepage and layered subsurface

Performance Evaluation and Operation Mechanism of Deep Borehole Heat Exchanger with Different Types of Boundary Conditions

Evaluation of the Long-Term Performance of the Deep U-type Borehole Heat Exchanger on Different Geological Parameters Using the Taguchi Method

Simulation Analysis on the Heat Performance of Deep Borehole Heat Exchangers in Medium-Depth Geothermal Heat Pump Systems

Advances in the effects of multiple factors on the thermal performance of deep borehole heat exchangers: A systematic review

Numerical investigation on the capacity and efficiency of a deep enhanced U-tube borehole heat exchanger system for building heating

Numerical analysis of heat extraction performance of a deep coaxial borehole heat exchanger geothermal system

Semi-analytical and numerical modeling of U-bend deep borehole heat exchanger

Assessment of the effect of heat storage on the production of clean geothermal energy using the medium and deep U-type borehole heat exchanger system