Hybrid calibration method for a single camera stereo digital image correlation system

Wei Qian,junzhe liang,jin liang,Maodong Ren

DOI: https://doi.org/10.1364/ao.524730

IF: 1.9

2024-06-25

Applied Optics

Abstract:Siwei Qian, Junzhe Liang, Jin Liang, Maodong Ren In single camera stereo digital image correlation systems, the existing calibration methods have problems with poor accuracy and violation ... [Appl. Opt. 63, 5099-5106 (2024)]

optics

What problem does this paper attempt to address?

Camera Calibration Technique Based on Virtual 3D Object

CHEN Hua-hua,GUO Ye,DU Xin

DOI: https://doi.org/10.3969/j.issn.1004-1699.2006.04.082

2006-01-01

Abstract:Absolute rotation and translation matrixes from unconstrained movements of multiple 2D coplanar planes are converted to relative ones respective to the reference view of the camera. A virtual 3D object is simulated using the reference position of the plane and the relative matrixes. It avoids the shortcoming , which movements of multiple 2D coplanar planes are performed by special equipments in order to compute successfully parameters of camera, of traditional 3D simulation. A calibration method based on the principle including pinhole model and nonlinear model is applied to the constructed 3D object and the simulated result shown that the proposal method has higher accuracy.
A Simple Rectification Method for Linear Multi-Baseline Stereovision System

Du Xin,Li Hong-dong,Gu Wei-kang

DOI: https://doi.org/10.1631/jzus.2004.0567

2004-01-01

Journal of Zhejiang University SCIENCE A

Abstract:The linear multi-baseline stereo system introduced by the CMU-RI group has been proven to be a very effective and robust stereovision system. However, most traditional stereo rectification algorithms are all designed for binocular stereovision system, and so, cannot be applied to a linear multi-baseline system. This paper presents a simple and intuitional method that can simultaneously rectify all the cameras in a linear multi-baseline system. Instead of using the general 8-parameter homography transform, a two-step virtual rotation method is applied for rectification, which results in a more specific transform that has only 3 parameters, and more stability. Experimental results for real stereo images showed the presented method is efficient.
Stereo Calibration and Rectification for Omnidirectional Multi-Camera Systems

Yanchang Wang,Xiaojin Gong,Ying Lin,Jilin Liu

DOI: https://doi.org/10.5772/50541

IF: 1.714

2012-01-01

International Journal of Advanced Robotic Systems

Abstract:Stereo vision has been studied for decades as a fundamental problem in the field of computer vision. In recent years, computer vision and image processing with a large field of view, especially using omnidirectional vision and panoramic images, has been receiving increasing attention. An important problem for stereo vision is calibration. Although various kinds of calibration methods for omnidirectional cameras are proposed, most of them are limited to calibrate catadioptric cameras or fish-eye cameras and cannot be applied directly to multi-camera systems. In this work, we propose an easy calibration method with closed-form initialization and iterative optimization for omnidirectional multi-camera systems. The method only requires image pairs of the 2D target plane in a few different views. A method based on the spherical camera model is also proposed for rectifying omnidirectional stereo pairs. Using real data captured by Ladybug3, we carry out some experiments, including stereo calibration, rectification and 3D reconstruction. Statistical analyses and comparisons of the experimental results are also presented. As the experimental results show, the calibration results are precise and the effect of rectification is promising.
Unconstrained Self-Calibration of Stereo Camera on Visually Impaired Assistance Devices.

Huabing Li,Kaiwei Wang,Kailun Yang,Ruiqi Cheng,Chen Wang,Lei Fei

DOI: https://doi.org/10.1364/ao.58.006377

IF: 1.9

2019-01-01

Applied Optics

Abstract:Stereo cameras are widely used in wearable visually impaired assistance devices (VIADs). However, the inevitable vibration, shock, and mechanical stress may make the camera pair become misaligned and cause a sharp decline in the quality of the acquired depth map, which significantly influences the performance of VIADs. In this paper, we propose an epipolar-constraint-based unconstrained self-calibration method that requires neither user involvement nor specific environment, while achieving a rotation accuracy of 0.83 mrad and a translation accuracy of 0.42 mm. Several approaches are proposed to address the image matching issues, including blurred images removal, mismatched key points removal, etc. Based on correctly matched key point pairs, a planar quadric-distribution approach is proposed to ensure the quality and consistency of the final key point group. These collection approaches ensure the reliability of key point pairs, which is the most important factor to realize high accuracy with minimum constraint. A comprehensive set of experiments demonstrates the high robustness of the proposed methods, which are suitable for VIADs. We also present a field test with blindfolded users to validate the flexibility and applicability of the approach.
Spatiotemporal Decoupling Based LiDAR-Camera Calibration under Arbitrary Configurations.

Bo Fu,Yue Wang,Yanmei Jiao,Xiaqing Ding,Li Tang,Rong Xiong

2019-01-01

Abstract:LiDAR-camera calibration is a precondition for many heterogeneous systems that fuse data from LiDAR and camera. However, the constraint from the common field of view and the requirement for strict time synchronization make the calibration a challenging problem. In this paper, we propose a hybrid LiDAR-camera calibration method aiming to solve these two difficulties. The configuration between LiDAR and camera is free from their common field of view as we move the camera to cover the scenario observed by LiDAR. 3D visual reconstruction of the environment can be achieved from the sequential visual images obtained by the moving camera, which later can be aligned with the single 3D laser scan captured when both the scene and the equipment are stationary. Under this design, our method can further get rid of the influence from time synchronization between LiDAR and camera. Moreover, the extended field of view obtained by the moving camera can improve the calibration accuracy. We derive the conditions of minimal observability for our method and discuss the influence on calibration accuracy from different placements of chessboards, which can be utilized as a guideline for designing high-accuracy calibration procedures. We validate our method on both simulation platform and real-world datasets. Experiments show that our method can achieve higher accuracy than other comparable methods.
A New Method for Increasing Accuracy of Distance Measurement Based on Single Visual Camera

Zewei Liu,Dongming Lu,Weixian Qian,Kan Ren,Guohua Gu,Jun Zhang,Chen Mao

DOI: https://doi.org/10.1007/s11082-019-1786-z

IF: 3

2019-01-01

Optical and Quantum Electronics

Abstract:Camera has been widely used in computer vision and mobile robotics applications because the sensor provides complementary information. However, the chief drawback of camera is that it only can provide 2D image information without depth information. There are lots of people studying the distance measurement with single visual camera, however it is difficult to achieve high precision. Usually we use two cameras to form stereo image and measure distance. Obviously it is complex. In this paper, we study the reason why distance measurement with single camera can hardly achieve high precision and propose a new method for improving the accuracy. We evaluate the proposed method and compare with existing methods to demonstrate the efficiency and high precision.
LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

Bo Fu,Yue Wang,Xiaqing Ding,Yanmei Jiao,Li Tang,Rong Xiong

DOI: https://doi.org/10.1109/tim.2019.2931526

IF: 5.6

2020-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:LiDAR-camera calibration is a precondition for many multi-sensor systems that fuse data from LiDAR and camera. However, the constraint from common field of view and the requirement for time synchronization make the calibration a challenging problem. In this paper, we propose a novel LiDAR-camera calibration method aiming to eliminate these two constraints. Specifically, we capture a scan of 3-D LiDAR when both the environment and the sensors are stationary, then move the camera to reconstruct the 3-D environment using the sequentially obtained images. Finally, we align 3-D visual points to the laser scan based on a tightly couple graph optimization method to calculate the extrinsic parameter between LiDAR and camera. Under this design, the configuration of these two sensors is free from the common field-of-view constraint due to the extended view from the moving camera. In addition, we also eliminate the requirement for time synchronization as we only use the single scan of laser data when the sensors are stationary. We theoretically derive the conditions of minimal observability for our method and prove that the accuracy of calibration is improved by collecting more observations from multiple scattered calibration targets. In addition, the proposed method is beneficial to not only plane measurement error-based calibration targets, such as chessboards, but also other point measurement error-based calibration targets, such as boxes and polygonal boards. We validate our method on both simulation and real-world data sets. Experiments show that our method achieves higher accuracy than other comparable methods, which is in accordance with our theoretical analysis.
A Stable, Efficient, and High-Precision Non-Coplanar Calibration Method: Applied for Multi-Camera-Based Stereo Vision Measurements

Hao Zheng,Fajie Duan,Tianyu Li,Jiaxin Li,Guangyue Niu,Zhonghai Cheng,Xin Li

DOI: https://doi.org/10.3390/s23208466

2023-10-14

Abstract:Traditional non-coplanar calibration methods, represented by Tsai's method, are difficult to apply in multi-camera-based stereo vision measurements because of insufficient calibration accuracy, inconvenient operation, etc. Based on projective theory and matrix transformation theory, a novel mathematical model is established to characterize the transformation from targets' 3D affine coordinates to cameras' image coordinates. Then, novel non-coplanar calibration methods for both monocular and binocular camera systems are proposed in this paper. To further improve the stability and accuracy of calibration methods, a novel circular feature points extraction method based on region Otsu algorithm and radial section scanning method is proposed to precisely extract the circular feature points. Experiments verify that our novel calibration methods are easy to operate, and have better accuracy than several classical methods, including Tsai's and Zhang's methods. Intrinsic and extrinsic parameters of multi-camera-systems can be calibrated simultaneously by our methods. Our novel circular feature points extraction algorithm is stable, and with high precision can effectively improve calibration accuracy for coplanar and non-coplanar methods. Real stereo measurement experiments demonstrate that the proposed calibration method and feature extraction method have high accuracy and stability, and can further serve for complicated shape and deformation measurements, for instance, stereo-DIC measurements, etc.
Calibrating large-FOV stereo digital image correlation system using phase targets and epipolar geometry

Bin Chen,Katia Genovese,Bing Pan

DOI: https://doi.org/10.1016/j.optlaseng.2021.106854

IF: 5.666

2022-03-01

Optics and Lasers in Engineering

Abstract:We propose an easy-to-implement and accurate calibration method for large-scale stereo-digital image correlation (stereo-DIC). First, the intrinsic parameters of each camera are separately calibrated using a regular-sized phase target. Using phase-shifted circular fringe patterns that feature the advantage of being insensitive to the defocus, the phase target can be placed in the close range of each camera. Then, scale-free extrinsic parameters are computed from the epipolar geometry, which can be easily retrieved from DIC registration of homologous point pairs in the stereo images of a test specimen surface. These intrinsic and scale-free extrinsic parameters are used as the initial guess for further optimizing the calibration results. Further, by measuring objects with known physical size, the scale information of the stereo-DIC system can be determined. The metrological performance of the proposed method is evaluated by large-scale shape reconstruction and deformation measurement tests. The obtained results demonstrate that the proposed method is a viable solution for the large-scale 3D deformation measurement tasks.

optics
Stereo camera calibration for large field of view digital image correlation using zoom lens

Zeren Gao,Yue Gao,Yong Su,Yang Liu,Zheng Fang,Yaru Wang,Qingchuan Zhang

DOI: https://doi.org/10.1016/j.measurement.2021.109999

IF: 5.6

2021-11-01

Measurement

Abstract:We propose a calibration method for stereo camera with a large field of view (FOV) using zoom lenses. We adopted Magill’s formula, using intrinsic parameters with small object distances to calculate intrinsic parameters with large object distances. We employed a regular sized calibration board to calibrate extrinsic parameters in the small FOV, using zoom lenses to reduce the FOV, and then calculated extrinsic parameters in the large FOV. Verification experiments showed 3D reconstruction error was approximately 1 mm when the FOV is about 6 × 6 m. The proposed calibration method will broaden the application range for 3D digital image correlation in scientific and engineering fields.

engineering, multidisciplinary,instruments & instrumentation
A Linear Approach for Depth and Colour Camera Calibration Using Hybrid Parameters

Ke-Li Cheng,Xuan Ju,Ruo-Feng Tong,Min Tang,Jian Chang,Jian-Jun Zhang

DOI: https://doi.org/10.1007/s11390-016-1641-7

IF: 1.871

2016-01-01

Journal of Computer Science and Technology

Abstract:Many recent applications of computer graphics and human computer interaction have adopted both colour cameras and depth cameras as input devices. Therefore, an effective calibration of both types of hardware taking different colour and depth inputs is required. Our approach removes the numerical difficulties of using non-linear optimization in previous methods which explicitly resolve camera intrinsics as well as the transformation between depth and colour cameras. A matrix of hybrid parameters is introduced to linearize our optimization. The hybrid parameters offer a transformation from a depth parametric space (depth camera image) to a colour parametric space (colour camera image) by combining the intrinsic parameters of depth camera and a rotation transformation from depth camera to colour camera. Both the rotation transformation and intrinsic parameters can be explicitly calculated from our hybrid parameters with the help of a standard QR factorisation. We test our algorithm with both synthesized data and real-world data where ground-truth depth information is captured by Microsoft Kinect. The experiments show that our approach can provide comparable accuracy of calibration with the state-of-the-art algorithms while taking much less computation time (1/50 of Herrera’s method and 1/10 of Raposo’s method) due to the advantage of using hybrid parameters.
A Systematic Stereo Camera Calibration Strategy: Leveraging Latin Hypercube Sampling and 2k Full-Factorial Design of Experiment Methods

Yanan Hao,Vin Cent Tai,Yong Chai Tan

DOI: https://doi.org/10.3390/s23198240

2023-10-03

Abstract:This research aimed to optimize the camera calibration process by identifying the optimal distance and angle for capturing checkered board images, with a specific focus on understanding the factors that influence the reprojection error (ϵRP). The objective was to improve calibration efficiency by exploring the impacts of distance and orientation factors and the feasibility of independently manipulating these factors. The study employed Zhang's camera calibration method, along with the 2k full-factorial analysis method and the Latin Hypercube Sampling (LHS) method, to identify the optimal calibration parameters. Three calibration methods were devised: calibration with distance factors (D, H, V), orientation factors (R, P, Y), and the combined two influential factors from both sets of factors. The calibration study was carried out with three different stereo cameras. The results indicate that D is the most influential factor, while H and V are nearly equally influential for method A; P and R are the two most influential orientation factors for method B. Compared to Zhang's method alone, on average, methods A, B, and C reduce ϵRP by 25%, 24%, and 34%, respectively. However, method C requires about 10% more calibration images than methods A and B combined. For applications where lower value of ϵRP is required, method C is recommended. This study provides valuable insights into the factors affecting ϵRP in calibration processes. The proposed methods can be used to improve the calibration accuracy for stereo cameras for the applications in object detection and ranging. The findings expand our understanding of camera calibration, particularly the influence of distance and orientation factors, making significant contributions to camera calibration procedures.
Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

Xia Liu,Zhenyu Liu,Guifang Duan,Jin Cheng,Xuetao Jiang,Jianrong Tan

DOI: https://doi.org/10.1364/ao.57.005130

IF: 1.9

2018-01-01

Applied Optics

Abstract:Precise calibration of a binocular vision system is the foundation of binocular vision measurement. In this paper, we propose a highly precise and robust binocular camera calibration method, which is devoted to minimize the error between the geometric relation of 3D reconstructed feature points and the ground truth, such as adjacent distance error, collinear error, and right-angle error. In addition, the reprojection error and epipolar are introduced to satisfy the homography relation and epipolar geometry theory better. We optimize all intrinsic parameters, extrinsic parameters, and distortion parameters to minimize the objective function, which is the sum of a series of nonlinear least squares terms. Levenberg-Marquardt iterative algorithm is used to find the optimal solution of the camera parameters. To test the precision and robustness of the proposed method, both actual measurement experiments and Gauss noise-adding experiments are carried out. The experimental results show that compared with the other two calibration methods in the contrast experiment, the distance measurement error, collinear error, and right-angle error are reduced dramatically. It is noticeable that in Gauss noise-adding experiments, the calibration parameters estimated by the proposed method are more stable.
CalQNet -- Detection of Calibration Quality for Life-Long Stereo Camera Setups

Jiapeng Zhong,Zheyu Ye,Andrei Cramariuc,Florian Tschopp,Jen Jen Chung,Roland Siegwart,Cesar Cadena

DOI: https://doi.org/10.48550/arXiv.2104.04837

2021-04-11

Abstract:Many mobile robotic platforms rely on an accurate knowledge of the extrinsic calibration parameters, especially systems performing visual stereo matching. Although a number of accurate stereo camera calibration methods have been developed, which provide good initial "factory" calibrations, the determined parameters can lose their validity over time as the sensors are exposed to environmental conditions and external effects. Thus, on autonomous platforms on-board diagnostic methods for an early detection of the need to repeat calibration procedures have the potential to prevent critical failures of crucial systems, such as state estimation or obstacle detection. In this work, we present a novel data-driven method to estimate the calibration quality and detect discrepancies between the original calibration and the current system state for stereo camera systems. The framework consists of a novel dataset generation pipeline to train CalQNet, a deep convolutional neural network. CalQNet can estimate the calibration quality using a new metric that approximates the degree of miscalibration in stereo setups. We show the framework's ability to predict from a single stereo frame if a state-of-the-art stereo-visual odometry system will diverge due to a degraded calibration in two real-world experiments.

Robotics
Multipath-Closure Calibration of Stereo Camera and 3D LiDAR Combined with Multiple Constraints

Jianqiao Duan,Yuchun Huang,Yuyan Wang,Xi Ye,He Yang

DOI: https://doi.org/10.3390/rs16020258

IF: 5

2024-01-10

Remote Sensing

Abstract:Stereo cameras can capture the rich image textures of a scene, while LiDAR can obtain accurate 3D coordinates of point clouds of a scene. They complement each other and can achieve comprehensive and accurate environment perception through data fusion. The primary step in data fusion is to establish the relative positional relationship between the stereo cameras and the 3D LiDAR, known as extrinsic calibration. Existing methods establish the camera–LiDAR relationship by constraints of the correspondence between different planes in the images and point clouds. However, these methods depend on the planes and ignore the multipath-closure constraint among the camera–LiDAR–camera sensors, resulting in poor robustness and accuracy of the extrinsic calibration. This paper proposes a trihedron as the calibration object to effectively establish various coplanar and collinear constraints between stereo cameras and 3D LiDAR. With the various constraints, the multipath-closure constraint between the three sensors is further formulated for the extrinsic calibration. Firstly, the coplanar and collinear constraints between the camera–LiDAR–camera are built using the trihedron calibration object. Then, robust and accurate coplanar constraint information is extracted through iterative maximum a posteriori (MAP) estimation. Finally, a multipath-closure extrinsic calibration method for multi-sensor systems is developed with structurally mutual validation between the cameras and the LiDAR. Extensive experiments are conducted on simulation data with different noise levels and a large amount of real data to validate the accuracy and robustness of the proposed calibration algorithm.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Online Stereovision Calibration Using On-Road Markings

Donghao Xu,Qiqi Zeng,Huijing Zhao,Chunzhao Guo,Kiyosumi Kidono,Yoshiko Kojima

DOI: https://doi.org/10.1109/itsc.2014.6957699

2014-01-01

Abstract:Stereo vision helps autonomous vehicles a lot to complete the tasks such as obstacle avoidance, positioning and 3D reconstruction. However, the 6-DOF transform between the camera pair, which is necessary for 3D structure recovery, will not stay constant during the long-time working. In automobile applications, conventional calibration approaches that use man-made patterns are inconvenient and the existing self-calibration techniques cannot produce enough accurate calibration results. In this work, we propose a self-calibration method to recalibrate stereo rig automatically as well as precisely by utilizing onroad markings. First, the system detects crosswalks and extracts their corners in the two images respectively. Next, the system matches the extracted corners, both between the image pair and between images and the corner map. Finally, with matched corner pairs, the stereo transformation of the stereo rig will be estimated. Experiments show that the proposed approach could extract and match crosswalks' corners accurately, and recalibrate sterevision system in terms of higher accuracy and robustness.
An accurate stereo vision system using cross-shaped target self-calibration method based on photogrammetry

Zhenzhong Xiao,Jin Liang,Dehong Yu,Zhengzong Tang,Anand Asundi

DOI: https://doi.org/10.1016/j.optlaseng.2010.06.006

IF: 5.666

2010-12-01

Optics and Lasers in Engineering

Abstract:This paper presents an accurate stereo vision system for industrial inspection, which uses a self-calibration method based on photogrammetry. A cross-shaped calibration pattern which is portable and easy to be manufactured is designed. The cross target can be used to calibrate stereo vision systems and obtain higher measurement precision conveniently. The mathematical model of the stereo vision system with 10 distortion parameters for each camera is proposed. The feature point detection method with sub-pixel accuracy is explored. The calibration initial values are computed using the relative orientation method and the direct linear transform (DLT) method of photogrammetry. The bundle adjustment algorithm is used to optimize the calibration parameters as well as the 3D coordinates of the feature points. Experiment results show that the RMS error of the reprojection in our method is less than 0.05 pixels and the distance measurement error is 0.031mm with a high precision scale bar which length is 221.001±0.003mm.

optics
Improved camera calibration method based on perpendicularity compensation for binocular stereo vision measurement system.

Zhenyuan Jia,Wei Liu,Yang Liu,Fuji Wang,Kai Zhao,Chaonan Fan,Jinghao Yang,Lingli Wang

DOI: https://doi.org/10.1364/OE.23.015205

IF: 3.8

2015-06-15

Optics Express

Abstract:High-precision calibration of binocular vision systems plays an important role in accurate dimensional measurements. In this paper, an improved camera calibration method is proposed. First, an accurate intrinsic parameters calibration method based on active vision with perpendicularity compensation is developed. Compared to the previous work, this method eliminates the effect of non-perpendicularity of the camera motion on calibration accuracy. The principal point, scale factors, and distortion factors are calculated independently in this method, thereby allowing the strong coupling of these parameters to be eliminated. Second, an accurate global optimization method with only 5 images is presented. The results of calibration experiments show that the accuracy of the calibration method can reach 99.91%.

Computer Science,Medicine,Engineering
Calibration Method of the Monocular Omnidirectional Stereo Camera

Ryota Kawamata,Keiichi Betsui,Kazuyoshi Yamazaki,Rei Sakakibara,Takeshi Shimano

DOI: https://doi.org/10.48550/arXiv.2108.07936

2021-08-18

Abstract:Compact and low-cost devices are needed for autonomous driving to image and measure distances to objects 360-degree around. We have been developing an omnidirectional stereo camera exploiting two hyperbolic mirrors and a single set of a lens and sensor, which makes this camera compact and cost efficient. We establish a new calibration method for this camera considering higher-order radial distortion, detailed tangential distortion, an image sensor tilt, and a lens-mirror offset. Our method reduces the calibration error by 6.0 and 4.3 times for the upper- and lower-view images, respectively. The random error of the distance measurement is 4.9% and the systematic error is 5.7% up to objects 14 meters apart, which is improved almost nine times compared to the conventional method. The remaining distance errors is due to a degraded optical resolution of the prototype, which we plan to make further improvements as future work.

Image and Video Processing,Computer Vision and Pattern Recognition
High-precision method of binocular camera calibration with a distortion model

Weimin Li,Siyu Shan,Hui Liu

DOI: https://doi.org/10.1364/AO.56.002368

2017-03-10

Abstract:A high-precision camera calibration method for binocular stereo vision system based on a multi-view template and alternative bundle adjustment is presented in this paper. The proposed method could be achieved by taking several photos on a specially designed calibration template that has diverse encoded points in different orientations. In this paper, the method utilized the existing algorithm used for monocular camera calibration to obtain the initialization, which involves a camera model, including radial lens distortion and tangential distortion. We created a reference coordinate system based on the left camera coordinate to optimize the intrinsic parameters of left camera through alternative bundle adjustment to obtain optimal values. Then, optimal intrinsic parameters of the right camera can be obtained through alternative bundle adjustment when we create a reference coordinate system based on the right camera coordinate. We also used all intrinsic parameters that were acquired to optimize extrinsic parameters. Thus, the optimal lens distortion parameters and intrinsic and extrinsic parameters were obtained. Synthetic and real data were used to test the method. The simulation results demonstrate that the maximum mean absolute relative calibration errors are about 3.5e-6 and 1.2e-6 for the focal length and the principal point, respectively, under zero-mean Gaussian noise with 0.05 pixels standard deviation. The real result shows that the reprojection error of our model is about 0.045 pixels with the relative standard deviation of 1.0e-6 over the intrinsic parameters. The proposed method is convenient, cost-efficient, highly precise, and simple to carry out.

Hybrid calibration method for a single camera stereo digital image correlation system

Camera Calibration Technique Based on Virtual 3D Object

A Simple Rectification Method for Linear Multi-Baseline Stereovision System

Stereo Calibration and Rectification for Omnidirectional Multi-Camera Systems

Unconstrained Self-Calibration of Stereo Camera on Visually Impaired Assistance Devices.

Spatiotemporal Decoupling Based LiDAR-Camera Calibration under Arbitrary Configurations.

A New Method for Increasing Accuracy of Distance Measurement Based on Single Visual Camera

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

A Stable, Efficient, and High-Precision Non-Coplanar Calibration Method: Applied for Multi-Camera-Based Stereo Vision Measurements

Calibrating large-FOV stereo digital image correlation system using phase targets and epipolar geometry

Stereo camera calibration for large field of view digital image correlation using zoom lens

A Linear Approach for Depth and Colour Camera Calibration Using Hybrid Parameters

A Systematic Stereo Camera Calibration Strategy: Leveraging Latin Hypercube Sampling and 2k Full-Factorial Design of Experiment Methods

Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

CalQNet -- Detection of Calibration Quality for Life-Long Stereo Camera Setups

Multipath-Closure Calibration of Stereo Camera and 3D LiDAR Combined with Multiple Constraints

Online Stereovision Calibration Using On-Road Markings

An accurate stereo vision system using cross-shaped target self-calibration method based on photogrammetry

Improved camera calibration method based on perpendicularity compensation for binocular stereo vision measurement system.

Calibration Method of the Monocular Omnidirectional Stereo Camera

High-precision method of binocular camera calibration with a distortion model