Abstract:The ejector refrigeration cycle (ERC) is often used as the sub-cycle of power and cooling cogeneration systems due to its advantages of simple structure design, few moving parts, less system investment, good stability and reliable operation. Considering the potential of organic Rankine cycle (ORC) in the utilization of low-grade heat, and the advantages of simple structure and many choices for working fluid, a novel power and cooling cogeneration system was designed, based on dual-pressure evaporation ORC (DORC) and ERC. In this system, a common condenser was used by DORC and ERC, and a part of working fluid separated from low-pressure steam generator outlet in DORC was used as the primary flow of ejector to drive ERC. A mathematical model for calculating the thermodynamic and thermoeconomic performances of the system was established. Sensitivity analysis was performed to determine the key parameters of the system, the results showed that the low-pressure evaporation temperature (TLPSG,out), high-pressure evaporation temperature (THP,E), vapor fraction of the low-pressure steam generator outlet (xLPSG,out) and working fluid mass flow ratio of high-pressure stage to low-pressure stage (k) were the four key parameters of the system. Parametric analysis showed that higher TLPSG,out and lower xLPSG,out were beneficial to increase the cooling output and thermal efficiency, while higher THP,E and larger k were helpful to increase the net power output and exergy efficiency. The net power output and exergy efficiency can be optimized by TLPSG,out and xLPSG,out. Using genetic algorithm (GA), multi-objective function optimization was carried out with THP,E, TLPSG,out, xLPSG,out and k as the decision variables. Moreover, the system's adaptability for working fluids R245fa, R236ea, R600, R600a, R601 and R601a was investigated. According to the optimization results, R236ea was the most suitable working fluid. When THP,E was 402.43K, TLPSG,out was 392.42K, xLPSG,out was 0.357 and k was 0.321, the calculated net power output , cooling output, thermal efficiency, exergy efficiency and total cost of unit exergy product (SUCP) were 273.00kW, 121.80kW, 14.52%, 44.03% and 42.62$/MWh, respectively. Exergy analysis was conducted using R236ea as working fluid. The results showed that the two steam generators and condenser were the main components responsible for most of the exergy destruction of the system in both basic case and optimized case. Compared to the basic case, the exergy destruction of the steam generators decreased by about 32.3%, and the total exergy destruction of the system decreased by about 5.0% in optimized case.

Exergy transfer and degeneration in thermochemical cycle reactions for hydrogen production: Novel exergy- and energy level-based methods

Optimizing Waste Heat Recovery with Organic Rankine Cycles: A Novel Graphical Approach Based on Exergy-Enthalpy Diagrams

Thermochemical water splitting cycles for hydrogen production: Perspectives for thermodynamic approaches

Exergy Analysis of Hydrogen Production by Steam Reforming of Hydrocarbons and Its Carbon Emission Evaluation

Energy and exergy analysis of hydrogen-fueled combined cycle

A novel exergy analysis method for cerium-based solar thermochemical cycles

Exergy Efficiency Design For Multi-Stream Plate-Fin Heat Exchangers Based On Entropy Generation Assessment

Exergy Analysis and Advanced Exergy Analysis of a Novel Power/Refrigeration Cascade System for Recovering Low-Grade Waste Heat at 90–150 °C

Temperature-entropy and energy utilization diagrams for energy, exergy, and energy level analysis in solar water splitting reactions

Exergy Analysis of Biomass and Nuclear Hydrogen Production System

Exergy Analysis and Optimization of a Hydrogen Production Process by a Solar-Liquefied Natural Gas Hybrid Driven Transcritical CO2 Power Cycle

Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat

Entransy transfer analysis methodology for energy conversion systems operating with thermodynamic cycles

Enhanced hydrogen production from thermochemical processes

Energy and Exergy Analysis of a Novel Solar-Hydrogen Production System with S–I Thermochemical Cycle

A multi-parameters evaluation on exergy for hydrogen metallurgy

Exergy, economic, and exergoenvironmental analyses of new combined heat and power process based on mechanism analysis of working fluid screening

Design and evaluation of a novel plan for thermochemical cycles and PEM fuel cells to produce hydrogen and power: Application of environmental perspective

Derivation of generalized thermoelectric energy equations and the study of thermoelectric irreversible processes based on energy, exergy, and entransy analysis

An Effective Thermodynamic Transformation Analysis Method for Actual Irreversible Cycle

EXERGY ANALYSIS OF HYDROGEN PRODUCTION VIA BIOMASS STEAM GASIFICATION AND PARTIAL OXIDATION