Abstract:Alternative energy sources are needed for a sustainable world due to rapidly increasing energy consumption, fossil fuels, and greenhouse gases worldwide. A hybrid renewable energy system (HRES) must be optimally dimensioned to be responsive to sudden load changes and cost-effective. In this study, the aim is to reduce the carbon emissions of a university campus by generating electricity from a hybrid energy production system with solar panels, wind turbine, a diesel generator, and battery components. On the university campus where the hybrid energy system will be installed, the ambient temperature, solar radiation, wind speed, and load demands have been recorded in our database. Optimization algorithms were used to select the power values of the system components to be installed using these data in an efficient and inexpensive manner according to the ambient conditions. For optimal sizing of HRES components, gray wolf optimizer combined with cuckoo search (GWOCS) technique was investigated using MATLAB/Simulink. In this way, it has been tried to increase their efficiency by combining current optimization techniques. The cornerstone of our optimization efforts for both on-grid and off-grid models pivots on a constellation of critical decision variables: the power harvested from wind turbines, the productivity of solar panels, the capacity of battery storage, and the power contribution of diesel generators. In our pursuit of minimizing the annual cost metric, we employ a tailor-made function, meticulously upholding an array of constraints, such as the quotient of renewable energy and the potential risk of power disruption. A robust energy management system is integral to our design, orchestrating the delicate power flow balance among micro-grid components—vital for satisfying energy demand. Upon analyzing the outcomes of the study, it is apparent that the proposed Scenario 1 HRES effectively utilizes solar and battery components within the off-grid model, surpassing the efficiency of four other hybrid scenarios under consideration. Regarding optimization processes, the off-grid model exhibits superior results with the implementation of the GWOCS algorithm, delivering faster and more reliable solutions relative to other methodologies. Conversely, the optimization of the on-grid model reaches its optimal performance with the application of the cuckoo search algorithm. A comprehensive comparison from both technical and economic view points suggests the on-grid model as the most feasible and suitable choice. Upon completion of the optimization process, the load demand is catered to by a combination of a 2963.827-kW solar panel, a 201.8896-kW battery, and an additional purchase of 821.9 MWh from the grid. Additionally, an energy surplus sale of 1379.8 MWh to the grid culminates in an annual cost of system (ACS) of 475782.8240 USD, a total net present cost of 4815520.2794 USD, and a levelized cost of energy of 0.12754 USD/kWh. Solar panels cover the entire system, and the renewable energy fraction is 100%.

Integrated renewable electrification system modeling and tri-objective optimization analysis for net zero energy institutional building: a simulated case study of green hydrogen production

Optimization with a simulated annealing algorithm of a hybrid system for renewable energy including battery and hydrogen storage

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Design and tri-objective optimization of an energy plant integrated with near-zero energy building including energy storage: An application of dynamic simulation

Optimized design and control of an off grid solar PV/hydrogen fuel cell power system for green buildings

Net-zero energy management through multi-criteria optimizations of a hybrid solar-hydrogen energy production system for an outdoor laboratory in Toronto

Precise Dynamic Modelling of Real-World Hybrid Solar-Hydrogen Energy Systems for Grid-Connected Buildings

Optimization and Dynamic Techno-Economic Analysis of a Novel PVT-based Smart Building Energy System

A smart zero-energy building having bidirectional interaction with electricity/heating networks: An attempt to achieve a higher renewable penetration

Sustainable Integration of Green Hydrogen in Renewable Energy Systems for Residential and EV Applications

Numerical assessment and optimization of photovoltaic-based hydrogen-oxygen Co-production energy system: A machine learning and multi-objective strategy

Modeling of hybrid renewable resources and comprehensive feasibility analysis of grid interactive energy system for commercial building: a case study

Size optimization of a stand-alone solar-wind-battery hybrid system for net zero energy buildings: A case study

Net-zero energy management and optimization of commercial building sectors with hybrid renewable energy systems integrated with energy storage of pumped hydro and hydrogen taxis

Comprehensive sustainability assessment and multi-objective optimization of a novel renewable energy driven multi-energy supply system

Multi-objective optimization and sustainable design: a performance comparison of metaheuristic algorithms used for on-grid and off-grid hybrid energy systems

Optimization and simulation of a grid-connected PV system using load forecasting methods: A case study of a university building

Development of a hybrid renewable energy system for residential complexes in solar-rich regions, harnessing the collaborative power of TRNSYS and the response surface methodology

Techno‐Economic Modeling of Diverse Renewable Energy Sources Integration: Achieving Net‐Zero CO2 Emissions

Investigation of a Tri-Renewable Energy System Coupled with Battery and Hydrogen Storages for a Sustainable City

Parametric Study and Optimization of Hydrogen Production Systems Based on Solar/Wind Hybrid Renewable Energies: A Case Study in Kuqa, China