Abstract:This paper presents an experimental characterization of millimeter-wave (mm-wave) channels in the 6.5 GHz, 10.5 GHz, 15 GHz, 19 GHz, 28 GHz and 38 GHz frequency bands in an indoor corridor environment. More than 4,000 power delay profiles were measured across the bands using an omnidirectional transmitter antenna and a highly directional horn receiver antenna for both co- and cross-polarized antenna configurations. This paper develops a new path-loss model to account for the frequency attenuation with distance, which we term the frequency attenuation (FA) path-loss model and introduce a frequency-dependent attenuation factor. The large-scale path loss was characterized based on both new and well-known path-loss models. A general and less complex method is also proposed to estimate the cross-polarization discrimination (XPD) factor of close-in reference distance with the XPD (CIX) and ABG with the XPD (ABGX) path-loss models to avoid the computational complexity of minimum mean square error (MMSE) approach. Moreover, small-scale parameters such as root mean square (RMS) delay spread, mean excess (MN-EX) delay, dispersion factors and maximum excess (MAX-EX) delay parameters were used to characterize the multipath channel dispersion. Multiple statistical distributions for RMS delay spread were also investigated. The results show that our proposed models are simpler and more physically-based than other well-known models. The path-loss exponents for all studied models are smaller than that of the free-space model by values in the range of 0.1 to 1.4 for all measured frequencies. The RMS delay spread values varied between 0.2 ns and 13.8 ns, and the dispersion factor values were less than 1 for all measured frequencies. The exponential and Weibull probability distribution models best fit the RMS delay spread empirical distribution for all of the measured frequencies in all scenarios.

Multi‐band millimetre wave indoor directional channel measurements and analysis for future wireless communication systems

Three-Dimensional Spatial Multiplexing For Directional Millimeter-Wave Communications In Multi-Cubicle Office Environments

3D MIMO Outdoor-to-Indoor Propagation Channel Measurement

Millimeter Wave Channel Measurements and Implications for PHY Layer Design

Measurement on 2.3GHz wideband indoor MIMO channel based on dual polarization antennas

mmWave Indoor Channel Measurement Campaign for 5G New Radio Indoor Broadcasting

3-D Statistical Indoor Channel Model for Millimeter-Wave and Sub-Terahertz Bands

Measurement System for Indoor Multi-Polarized MIMO Channel

Statistical Modelling and Characterization of Experimental mm-Wave Indoor Channels for Future 5G Wireless Communication Networks

MIMO Channel Modeling and Capacity analysis using 3-D Spatial Statistical Channel Model for Millimeter Wave outdoor communication

Millimeter Wave Channel Measurements in a Railway Depot

Directional Wideband Channel Measurements at 28 GHz in an Industrial Environment

3-D Statistical Channel Model for Millimeter-Wave Outdoor Mobile Broadband Communications

Path Loss and Directional Gain Measurements at 28 GHz for non-Line-of-Sight Coverage of Indoors with Corridors

Wideband Millimeter-Wave Propagation Measurements and Channel Models for Future Wireless Communication System Design

Distributed MIMO Measurements for Integrated Communication and Sensing in an Industrial Environment

MIMO Wireless Channel Sounder and Models for Indoor Channel Analyses

An Experimental Investigation of Wideband MIMO Channel Based on Indoor Hotspot NLOS Measurements at 2.35GHz

Stationarity Region of Mm-Wave Channel Based on Outdoor Microcellular Measurements at 28 GHz

Indoor Millimeter-Wave Systems: Design and Performance Evaluation

Outdoor-to-Indoor 28 GHz Wireless Measurements in Manhattan: Path Loss, Environmental Effects, and 90% Coverage