Abstract:The coke deactivation over HZSM-5 zeolites with different Si/Al ratios in the n-hexane cracking reaction was studied in 200 h of reaction. In the products, alkanes, C-2(=), C-3(=), C-4(=) and aromatic compounds such as benzene, toluene, and xylene (BTX) were formed. The selectivity variations of C-3(=) and C-4(=) were inverse proportional to that of BTX, indicating that C-3(=) and C-4(=) intermediates were the precursors of BTX compounds. The internal coke was preferentially formed inside zeolite micropores in the initial reaction period (0-70 h), which significantly diminished the micropore volume, covered the strong acid sites, and strongly inhibited catalytic activity of the catalysts with lower Si/Al ratio. The external coke was principally formed after 70 h of reaction and had a less influence on the catalytic activity. The internal coke (density 1.03 g.cm(-3) and a H/C ratio of 1.16) could be effectively removed by H-2 treatment at 850. C; while the external coke (density 1.46 g.cm(-3) and a H/C ratio of 0.28) with graphite-like structure resisted H-2 treatment. For the zeolites with low Si/Al molar ratio (25 and 50), the rapid coking stage (0-70 h) occurred at high n-hexane conversion followed by a slow deactivation stage at low conversion (70-200 h); for zeolites with high Si/Al molar ratio (85 and 130), a very slow deactivation stage took place in the reaction period (0-70 h), followed by a faster deactivation stage (70-200 h). This work demonstrated that zeolite deactivation behavior was correlated not only with the strong acid sites and microporosity of catalyst, but also affected by the location, amount, structure, and type of coke. The mechanisms for internal and external coke formation and H-2 decoking strategy for the deactivated catalyst regeneration were discussed and proposed.

Comparative effects of mesopores and framework defects on the deactivation of HZSM-5 catalyst during alkylphenol dealkylation

Effects of mesopore introduction on the stability of zeolites for 4-iso-Propylphenol dealkylation

Pore Plugging Effects on the Performance of ZSM-5 Catalyst in MTP Reaction Using a Discrete Model

Preparation of aromatics from fast catalytic pyrolysis of cellulose over alkali-treated HZSM-5

Pore Blocking by Phenolates as Deactivation Path during the Cracking of 4-Propylphenol over ZSM-5

Study of Coke Formation Mechanism on HZSM-5 Zeolite During Co-cracking of n-Hexane and Alcohols

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

Effect of Hierarchical HZSM-5 Zeolite on the Catalytic Depolymerization of Organosolv Lignin to Renewable Phenols

Effects of the controllable mesostructure of nano-sized ZSM-5 on the co-cracking of phenolic bio-oil model compounds and ethanol

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Effect of Catalyst (de)activation on Reagent Diffusion in ZSM-5/alumina Extruded Pellet for the Methanol-to-hydrocarbons Conversion

Influence of framework Al distribution in HZSM-5 channels on catalytic performance in the methanol to propylene reaction

Study on the Deactivation Mechanism of HZSM-5 in the Process of Catalytic Cracking of N-Hexane

Aqueous-phase hydrodeoxygenation of lignin monomer eugenol: Influence of Si/Al ratio of HZSM-5 on catalytic performances

Regulation of Pore Structure and Acidity of a ZSM-5 Catalyst for Dehydration of Glycerol to Acrolein

Improved Performance of Mesoporous HZSM-5 Designed with Selective Deactivation of External Surface Acidity in the Isomerization of Styrene Oxide

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Coking and Deactivation Behavior of ZSM-5 During the Isomerization of Styrene Oxide to Phenylacetaldehyde

Alkylation of Phenol with Methanol over ZSM‐5 Zeolite

Deactivation by coking of industrial ZSM-5 catalysts used in LDPE pyrolysis and regeneration by ozonation process – Bench scale studies