Abstract:Although Li metal is considered the most potential anode for Li based batteries, the repeatedly large volume variation and low Coulombic efficiency (CE) are still serious challenges for commercial application. Herein, the interconnect closed hollow graphene spheres with electronic-ionic bi-functional conduction network containing Li4.4Sn nanoparticles loaded internally and β-Li3PS4 solid electrolyte layer coated externally (β-LPS/SG/Li4.4Sn) is proposed to achieve uniform and dense Li deposition. Density functional theory (DFT) calculation and experimental results show that Li4.4Sn owns larger Li binding energy and lower nucleation overpotential than spherical graphene (SG), thus being able to guide Li traversing and depositing inside the hollow spheres. The Tafel curves, Li+ diffusion activation energy and experimental results reveal that the β-Li3PS4 coating layer significantly improves the ionic conductivity of the negative skeleton, covers the defect sites on the SG surface, provides continuous ion transmission channels and accelerates Li+ migration rate. The synergy of both can inhibit the formation of dendritic Li and reduce side reaction between freshly deposited lithium and the organic electrolyte. It's found that Li is preferentially deposited within the SG, evenly deposited on the spherical shell surface until it's completely filled to obtain a dense lithium layer without tip effect. As a result, the β-LPS/SG/Li4.4Sn anode exhibits a long life of up to 2800 h, an extremely low overpotential (∼13 mV) and a high CE of 99.8 % after 470 cycles. The LiFePO4-based full cell runs stably with a high capacity retention of 86.93 % after 800 cycles at 1C. It is considered that the novel structure design of Li anode skeleton with electron-ionic bi-functional conduction is a promising direction to construct long-term stable lithium metal anodes.

A robust janus bilayer with tailored ionic conductivity and interface stability for stable Li metal anodes

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Activating Electrode-Electrolyte Interface via a ZnO@Black Phosphorus Modulation Layer for Dendrite-Free Li Metal Anodes

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

A Dual‐Protective Artificial Interface for Stable Lithium Metal Anodes

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Dendrite‐Free Lithium Deposition and Stripping Regulated by Aligned Microchannels for Stable Lithium Metal Batteries

Lithium Phosphorus Oxynitride As an Efficient Protective Layer on Lithium Metal Anodes for Advanced Lithium-Sulfur Batteries

Robust Porous Artificial Layers with Boosted Lithiophilicity and Li+ Diffusion for Dendrite-Free Li Metal Anodes

Stable LiMetal Anode Enabled by Simultaneous Regulation of Electrolyte Solvation Chemistry and The Solid Electrolyte Interphase

Building Artificial Solid‐Electrolyte Interphase with Uniform Intermolecular Ionic Bonds toward Dendrite‐Free Lithium Metal Anodes

Regulating Li‐ion Flux Through a Dense Yet Highly Ionic Conductive Interlayer for Stable Li Deposition

Organic Eutectic Mixture Incorporated with Graphene Oxide Sheets as Lithiophilic Artificial Protective Layer for Dendrite‐Free Lithium Metal Batteries

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes

2D Microporous Polymers/Reduced Graphene Oxide with Built‐In Lithiophilic Sites for Uniform Lithium Deposition in Lithium Metal Anode

Electronic-ionic bi-functional conduction β-Li3PS4-coated graphene hollow spheres as a highly stable lithium metal anode skeleton

Stable Li Metal Anode by a Polyvinyl Alcohol Protection Layer Via Modifying Solid-Electrolyte Interphase Layer

Bipolar Polymeric Protective Layer for Dendrite‐Free and Corrosion‐Resistant Lithium Metal Anode in Ethylene Carbonate Electrolyte

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating