Abstract:In this study, a 1.57-µm airborne double-pulse integrated-path differential absorption (IPDA) light detection and ranging (LIDAR) system was developed for CO2 measurements. This airborne IPDA LIDAR is integrated with a real-time frequency monitoring system, an integrated sensor for temperature, pressure, and humidity, an inertial navigation system, and a global positioning system. The random errors of the LIDAR system, which are caused by the signal noise, background noise, and detector noise, among other factors, are analyzed for different target reflectivities at a flight altitude of 8 km. After parametric optimization, the signal is unsaturated at high target reflectivity. Further, it can be detected at low target reflectivity by adjusting the detector gain. After the averaging of 148 shots, the relative random error (RRE) was 0.057% for a typical target reflectivity of 0.1 sr-1. Moreover, the systematic errors caused by the laser pulse energy, linewidth, spectral purity, and frequency drift, as well as the atmospheric parameters related to the flight experiments are also investigated. The relative system error (RSE) was 0.214% as determined based on an analysis of the systematic errors, which are primarily caused by the frequency drift. Two methods are proposed to reduce the RSE caused by the frequency drift. The first is the averaging of 148 shots, which can reduce the RSE to 0.096%. The other method involves calculating the integral weight function (IWF) using real-time frequency. However, this is a time-consuming and computationally intensive process. Hence, look-up tables for the absorption cross-section were created to overcome this issue, resulting in a decrease in the RSE to 0.096%. Using actual aircraft attitude angles, velocity, and position data from flight experiments, the relative errors (REs) in the IWF caused by the uncorrected integral path and Doppler shift were determined to be 0.273% and 0.479%, respectively. However, it was found that corrections to the integral path and Doppler shift based on accurate calculations of the IWF cause the airborne platform to turn in such a way that the REs are eliminated. Hence, this study confirms the validity of system parameters and provides a reference for other researchers who study similar IPDA LIDAR systems. Further, the sensitivity analysis of the airborne IPDA LIDAR system can provide a reference to future data inversions. Moreover, the proposed correction algorithms for the integral path and Doppler shift contribute to more accurate inversion results.

Potential of Ground-Based Multiwavelength Differential Absorption LiDAR to Measure δ 13 C in Open Detected Path

Detection of Atmospheric Boundary Layer Height in the Plum Rain Season over Hangzhou Area with Three-Dimensional Scanning Polarized Lidar

Obtaining Gradients of XCO2 in Atmosphere Using the Constrained Linear Least-Squares Technique and Multi-Wavelength IPDA LiDAR

[Open-path online monitoring of ambient atmospheric CO2 based on laser absorption spectrum]

Airborne atmospheric carbon dioxide measurement using 1.5??μm laser double-pulse IPDA lidar over a desert area

Performance Evaluation of Spaceborne Integrated Path Differential Absorption Lidar for Carbon Dioxide Detection at 1572 nm

Research on Atmospheric CO2 Remote Sensing with Open-Path Tunable Diode Laser Absorption Spectroscopy and Comparison Methods

An inversion method for estimating strong point carbon dioxide emissions using a differential absorption Lidar

Spectral Purity Study for IPDA Lidar Measurement of CO2

High-Precision CO 2 Column Length Analysis on the Basis of a 1.57-μm Dual-Wavelength IPDA Lidar.

Atmospheric carbon dioxide profile detection with a continuous-wave differential absorption lidar

Development of an atmospheric CO2 sensor based on TDLAS-WMS

High-Precision CO2 Column Length Analysis on the Basis of a 1.57-μm Dual-Wavelength IPDA Lidar

Sensitivity analysis and correction algorithms for atmospheric CO2 measurements with 1.57-µm airborne double-pulse IPDA LIDAR

Measurement of Atmospheric CO2 Column Concentrations Based on Open-Path TDLAS

Study on the Impact of the Doppler Shift for CO2 Lidar Remote Sensing

A 3.2-μm Wavelength Integrated Path Differential Absorption Lidar for Probing Open-Path Benzene Gas

Spectral Energy Model-Driven Inversion of XCO 2 in IPDA Lidar Remote Sensing

High Repetition Rate Mid-Infrared Differential Absorption Lidar for Atmospheric Pollution Detection

Simulation of Atmospheric Density Detection by Spaceborne Rayleigh Lidar

Research on Atmospheric Temperature Fine Measurements from Near Surface to 60 Km Altitude Based on an Integrated LIDAR System