Abstract:The failure mechanism of hydraulic fractures in heterogeneous geological materials is an important topic in mining and petroleum engineering. A three-dimensional (3D) finite element model that considers the coupled effects of seepage, damage, and the stress field is introduced. This model is based on a previously developed two-dimensional (2D) version of the model (RFPA2D-Rock Failure Process Analysis). The RFPA3D-Parallel model is developed using a parallel finite element method with a message-passing interface library. The constitutive law of this model considers strength and stiffness degradation, stress-dependent permeability for the pre-peak stage, and deformation-dependent permeability for the post-peak stage. Using this model, 3D modelling of progressive failure and associated fluid flow in rock are conducted and used to investigate the hydro-mechanical response of rock samples at laboratory scale. The responses investigated are the axial stress–axial strain together with permeability evolution and fracture patterns at various stages of loading. Then, the hydraulic fracturing process inside a rock specimen is numerically simulated. Three coupled processes are considered: (1) mechanical deformation of the solid medium induced by the fluid pressure acting on the fracture surfaces and the rock skeleton, (2) fluid flow within the fracture, and (3) propagation of the fracture. The numerically simulated results show that the fractures from a vertical wellbore propagate in the maximum principal stress direction without branching, turning, and twisting in the case of a large difference in the magnitude of the far-field stresses. Otherwise, the fracture initiates in a non-preferred direction and plane then turns and twists during propagation to become aligned with the preferred direction and plane. This pattern of fracturing is common when the rock formation contains multiple layers with different material properties. In addition, local heterogeneity of the rock matrix and macro-scale stress fluctuations due to the variability of material properties can cause the branching, turning, and twisting of fractures.

Coupled analysis of flow, stress and damage (FSD) in rock failure

Numerical Study of Rock Failure due to the Pre-Existing Crack Initiation and Propagation and Hydraulic Fractures Interaction

FE Analysis of Rock with Hydraulic-Mechanical Coupling Based on Continuum Damage Evolution

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

Simulating progressive failure in fractured saturated rock under seepage condition using a novel coupled model and the application

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

Coupled Hydro-Mechanical Analysis for Rainfall-Induced Failure of Fractured Rock Slopes

The Time-Dependent Failure Mechanism of Rocks and Associated Application in Slope Engineering: An Explanation Based on Numerical Investigation

An Efficient Computational Model for Simulating Stress-dependent Flow in Three-dimensional Discrete Fracture Networks

Numerical Study of the Strength and Characteristics of Sandstone Samples with Combined Double Hole and Double Fissure Defects

Seepage-stress combined experiment and damage model of rock in different loading and unloading paths

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Simulation of Shear and Tensile Fractures Using Ductile Phase Field Modelling with the Calibration of P Wave Velocity Measurement and Moment Tensor Inversion

RESEARCH ON COUPLING CHARACTERISTICS OF FLUID FLOW AND STRESS WITHIN ROCK

Phase-field simulations of unloading failure behaviors in rock and rock-like materials

Stress Distribution in Direct Shear Loading and its Implication for Engineering Failure Analysis

Fracturing behavior and damage model of spatial-rotation fissured sandstone: An experimental study on freeze–thaw and fatigue loads coupling

Stress–Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard Rock

Shear Damage Simulations of Rock Masses Containing Fissure-Holes Using an Improved SPH Method

Numerical Simulation of 3D Hydraulic Fracturing Based on an Improved Flow-Stress-Damage Model and a Parallel FEM Technique

A New Proposed Method for Observing Fluid in Rock Fractures Using Enhanced X-Ray Images from Digital Radiography