Abstract:The proton-exchange membrane fuel cell (PEMFC) technology is one of the most promising approaches for energy conversion in automotive applications. Despite the use of expensive noble metal electrocatalysts, the sluggish kinetics of the oxygen reduction reaction (ORR) in acid media, and formation of the undesirable hydrogen peroxide intermediate are still the main drawbacks, on top of the stability problems, when it comes to the widespread commercialization of PEMFC devices. The progress in this subject is greatly hindered by the high cost and scarcity of the state-of-the-art platinum-based materials which are regarded as the most effective cathode catalysts. Therefore, most of the current research studies have been devoted to the optimization of active centers and maximization of their utilization, which should allow the lowering of the cathode Pt loadings without loss of performance and durability. Unfortunately, the problem of electrochemical stability and the danger of generation of higher quantities of the undesirable hydrogen peroxide intermediate may become even more serious in the case of systems utilizing lower amounts of the Pt catalyst Among important strategies is hybridization, activation, and stabilization of carbon-supported Pt catalysts by functionalization through admixing with certain nanostructured and typically substoichiometric metal oxides. Special attention is paid to application of the bi- or multi-metallic Pt-based alloys in their various forms and structures. Additionally, doping of carbon carriers with heteroatoms would produce surface functional groups and active centers capable of not only improving the catalysts' performance, but also affecting their stability. Among other important issues are such features as porosity, hydrophilicity, and degree of graphitization of carbon components, in addition to the existence of metal–support interactions, high electrochemical active surface area, electronic structure of interfacial Pt, and the feasibility of adsorptive or activating interactions with oxygen molecules. Voltammetric approaches, particularly the rotating ring-disk electrode (RRDE) methodology, are typically applied to diagnose mechanisms and dynamics of ORR. A tempting alternative for recording the electrochemical responses is to integrate the current and to report charge passed as a function of time. Chronocoulometry offers important advantages including good signal-to-noise ratio because the act of integration smooths random noise on the current transients. Furthermore, by integrating the responses, it is possible to separate surface phenomena (e.g. interfacial oxidation of carbon or platinum) more readily from bulk electrochemical responses (ORR). The double-potential-step chronocoulometry permits, in principle, estimation of the number of electrons (n) involved in the oxygen reduction and the percent of formation of the H 2 O 2 intermediate. The problem lies in understanding the reaction kinetics and mechanisms in order to define properly experimental parameters (potential steps and pulse times). Comparative measurements are performed using RRDE voltammetry. Hybrid supports, which utilize metal oxides (e.g., CeO 2 , WO 3 , or ZrO 2 ) have been demonstrated to stabilize Pt and carbon nanostructures and diminish their corrosion while exhibiting high activity toward the four-electron (most efficient) reduction of oxygen. Acknowledgements: This work was supported by the National Science Center (Poland) under Opus Project (2018/29/B/ST5/02627) and under auspices of the European Union EIT Raw Materials ALPE 19247 Project (Specific Grant Agreement No. EIT/RAW MATERIALS/SGA2020/1).

Design and Impact: Navigating the Electrochemical Characterization Methods for Supported Catalysts

Review—Recent Progress in Electrocatalysts for Oxygen Reduction Suitable for Alkaline Anion Exchange Membrane Fuel Cells

Novel Pathways for Improving the ORR Rate

A Comprehensive Review Of Pt Electrocatalysts For The Oxygen Reduction Reaction: Nanostructure, Activity, Mechanism And Carbon Support In Pem Fuel Cells

Emerging strategies and developments in oxygen reduction reaction using high-performance platinum-based electrocatalysts

Science and engineering for non-noble-metal-based electrocatalysts to boost their ORR performance: A critical review

Practical Classification of Catalysts for Oxygen Reduction Reactions: Optimization Strategies and Mechanistic Analysis

Oxygen reduction performance measurements: Discrepancies against benchmarks

Recent Progresses in Oxygen Reduction Reaction Electrocatalysts for Electrochemical Energy Applications

Understanding Catalytic Activity Trends in the Oxygen Reduction Reaction.

Molecular Design of Porous Organic Polymer-Derived Carbonaceous Electrocatalysts for Pinpointing Active Sites in Oxygen Reduction Reaction

Design and development of new nanostructures as efficient catalyst toward ORR

Spectroscopic Insights into the Nature of Active Sites in Iron–nitrogen–carbon Electrocatalysts for Oxygen Reduction in Acid

Best Practices and Testing Protocols for Benchmarking ORR Activities of Fuel Cell Electrocatalysts Using Rotating Disk Electrode

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design.

Recent Development of Platinum-Based Nanocatalysts for Oxygen Reduction Electrocatalysis

Tailoring of Electrocatalyst Interactions at Interfacial Level to Benchmark the Oxygen Reduction Reaction

(Invited) Oxygen Reduction at Low-Pt-Content-Catalysts in Acid Media: Development of Systems and Electroanalytical Diagnostic Methodology

Selective oxygen reduction reaction: mechanism understanding, catalyst design and practical application

Metal Oxide‐Supported Metal Catalysts for Electrocatalytic Oxygen Reduction Reaction: Characterization Methods, Modulation Strategies, and Recent Progress

Recent progress of electrocatalysts for oxygen reduction in fuel cells