Abstract:A combination of high open-circuit voltage (Voc) and short-circuit current density (Jsc) typically creates effective organic solar cells (OSCs). Y5, a member of the Y-series acceptors, can achieve high Voc of 0.94 V with PM6 but low Jsc of 12.8 mA cm–2. To maintain the high Voc while increasing the Jsc of devices, we developed a new nonfullerene acceptor, namely, BTP-C2C4-N, by extending the conjugation of a Y5 molecule with a naphthalene-based end acceptor. In comparison with Y5-based devices, PM6:BTP-C2C4-N-based devices exhibited significantly higher Jsc of 18.2 mA cm–2 followed by a high Voc. To further increase the photovoltaic properties of BTP-C2C4-N analogues, BTP-C4C6-N and BTP-C6C8-N molecules with better processability and film morphology are obtained by adjusting the alkyl branched chain length. The optimized OSCs based on BTP-C4C6-N with a moderate alkyl branched chain length exhibited the best PCE of 12.4% with a high Voc of 0.94 V and Jsc of 20.7 mA cm–2. Notably, the devices achieved a low energy loss of 0.49 eV (0.51 eV for Y5 system) accompanied by a small nonradiative energy loss. The results indicate that nonfullerene acceptors with extended terminal motifs and optimized branched chain lengths can effectively enhance the performance of OSCs and reduce energy loss.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04273?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04273</a>.Detailed information of material synthesis, device preparation, absorption curve, DFT calculations, GIWAXS patterns for neat PM6 and Y5, the AFM image of Y5 blend, data of mobility, contact angle measurements, and so forth (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04273/suppl_file/am1c04273_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Conjugated Extension of Non-Fullerene Acceptors Enables Efficient Organic Solar Cells with Optoelectronic Response over 1000 nm

Dithienopicenocarbazole-Based Acceptors For Efficient Organic Solar Cells With Optoelectronic Response Over 1000 Nm And An Extremely Low Energy Loss

P3HT-Based Organic Solar Cells with a Photoresponse to 1000 nm Enabled by Narrow Band Gap Nonfullerene Acceptors with High HOMO Levels

Near infrared electron acceptors with a photoresponse beyond 1000 nm for highly efficient organic solar cells

Near-Infrared Nonfullerene Acceptors Based on Benzobis(thiazole) Unit for Efficient Organic Solar Cells with Low Energy Loss

9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor.

Organic Solar Cells with Over 19% Efficiency Enabled by a 2D‐Conjugated Non‐fullerene Acceptor Featuring Favorable Electronic and Aggregation Structures

Near-Infrared Electron Acceptors with Unfused Architecture for Efficient Organic Solar Cells.

Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells

Enhancement Of Intra- And Inter-Molecular Pi-Conjugated Effects For A Non-Fullerene Acceptor To Achieve High-Efficiency Organic Solar Cells With An Extended Photoresponse Range And Optimized Morphology

Heptacyclic S,N-Heteroacene-Based Near-Infrared Nonfullerene Acceptor Enables High-Performance Organic Solar Cells with Small Highest Occupied Molecular Orbital Offsets

Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR-Absorbing Electron Acceptors.

Tuning the Intermolecular Electrostatic Interaction toward High‐Efficiency and Low‐Cost Organic Solar Cells

Near-infrared absorbing non-fullerene acceptors with unfused D-A-D core for efficient organic solar cells

Balanced Partnership Between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with > 12% Efficiency

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Side-chain Modification of Non-fullerene Acceptors for Organic Solar Cells with Efficiency over 18%

π-Extended Nonfullerene Acceptors for Efficient Organic Solar Cells with a High Open-Circuit Voltage of 0.94 V and a Low Energy Loss of 0.49 eV

An Unfused‐Core‐Based Nonfullerene Acceptor Enables High‐Efficiency Organic Solar Cells with Excellent Morphological Stability at High Temperatures

Delicate chemical structure regulation of nonfullerene acceptor for efficient and large thickness organic solar cells

Systematic Engineering of Near-Infrared Small Molecules Based on 4H-Cyclopenta[1,2-b:5,4-b']dithiophene Acceptors for Organic Solar Cells