Abstract:Lithium–sulfur (Li–S) batteries are regarded as one of the most promising next-generation battery technologies owing to their ultrahigh energy density up to 2600 W h kg–1 and low cost. However, major challenges still remain in the application of Li–S batteries, such as shuttle effect and sluggish redox kinetics. Herein, it is demonstrated that phosphorus doping can not only significantly improve the polysulfide adsorption but also enhance the catalysis effects of metal–organic framework-derived CoS2 nanoboxes in Li–S batteries. Consequently, a modified separator integrated with P–CoS2 and carbon nanotubes effectively suppresses the polysulfide shuttle and propels the redox kinetics of polysulfides, thus promising higher specific discharge capacity, better rate, and stable cycle performance. Even under the high sulfur loading condition (4.8 mg cm–2), the areal discharge capacity of the cell with the functional separator can still remain at 4.5 mA h cm–2 after 100 cycles at 0.2 C. More importantly, this work may encourage more effort on anion doping for engineering the polar surface of transition-metal compounds to further mediate the interfacial redox chemistry between transition-metal compounds and polysulfides in Li–S batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00494?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00494</a>.XRD patterns, SEM, TEM images of Co–MOF and CoS2; high-magnification XRD patterns of CoS2 and P-CoS2 in the 2θ range of 30–35°; EDS mapping images of CoS2 and P-CoS2; P 2p XPS spectrum of P-CoS2 after etching; SEM images from the front and the cross-section for the CNT-, CoS2/CNT-, and P-CoS2/CNT-modified separator; digital image of the P-CoS2/ separator and folding and unfolding test of the P-CoS2/ separator; permeation tests of the pristine Celgard, , CoS2/, and P-CoS2/ separators; CV curves of symmetric cells of CNTs with and without Li2S6 at 1 mV s–1; galvanostatic discharge/charge curves of P-CoS2/ at 2.0 C; galvanostatic discharge/charge curves and cycling performance of the P-CoS2 cathode without sulfur for the initial few cycles at 0.1 C; postmortem SEM images and EDS analysis of the lithium foil; postmortem SEM images and EDS analysis of CoS2 and P-CoS2 after 1.0 C cycles; and performance statistics of similar Li–S batteries in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00494/suppl_file/am1c00494_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Coordinating Adsorption and Catalytic Activity of Polysulfide on Hierarchical Integrated Electrodes for High-Performance Flexible Li–S Batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Encapsulating Co9S8 nanocrystals into CNT-reinforced N-doped carbon nanofibers as a chainmail-like electrocatalyst for advanced Li-S batteries with high sulfur loading

Phosphorus-Doped Metal–Organic Framework-Derived CoS 2 Nanoboxes with Improved Adsorption-Catalysis Effect for Li–S Batteries

Flexible and Self-Supported Sulfur Cathode for High-Energy-Density Lithium-Sulfur Batteries

Confined Co9S8 nanocrystals into N/S-Co-doped Carbon Nanofibers as A Chainmail-like Electrocatalyst for High-performance Lithium-Sulfur Batteries with High Sulfur Loading

Superhierarchical Conductive Framework Implanted with Nickel/Graphitic Carbon Nanocages as Sulfur/Lithium Metal Dual-Role Hosts for Li–S Batteries

Coordinated Adsorption and Catalytic Conversion of Polysulfides Enabled by Perovskite Bimetallic Hydroxide Nanocages for Lithium‐Sulfur Batteries

3D Cotton-Pad-Like Hierarchically Porous Structure Stacked by Hexagonal Highly Graphitized Carbon Nanosheets as Sulfur Immobilizers for Li–S Batteries

Co-Fe Mixed Metal Phosphide Nanocubes with Highly Interconnected-Pore Architecture as an Efficient Polysulfide Mediator for Lithium-Sulfur Batteries

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen‐Doped Carbon Heterostructure for Long‐Cycle‐Life Lithium‐Sulfur Batteries

“Soft on rigid” nanohybrid as the self-supporting multifunctional cathode electrocatalyst for high-performance lithium-polysulfide batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

ZnS-SnS@NC Heterostructure as Robust Lithiophilicity and Sulfiphilicity Mediator toward High-Rate and Long-Life Lithium–Sulfur Batteries

Nanoporous Cobalt–Nitrogen–Carbon Catalyst-Based Multifunctional Interlayer for Enhanced Li–S Battery Performance

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

Highly active CoP-Co2N confined in nanocarbon enabling efficient electrocatalytic immobilizing-conversion of polysulfide targeting high-rate lithium-sulfur batteries

Synthesis of CoO Nanocrystals Decorated Porous Carbon Nanotube Microspheres As Sulfur Host for High Performance Li/S Batteries.

Cobalt Atoms Dispersed on Hierarchical Carbon Nitride Support As the Cathode Electrocatalyst for High-Performance Lithium-Polysulfide Batteries

Integrating CoP/Co heterojunction into nitrogen-doped carbon polyhedrons as electrocatalysts to promote polysulfides conversion in lithium-sulfur batteries