Abstract:Lignin is an abundant source of aromatics with low effective hydrogen-to-carbon ratio (H/Ceff), and the depolymerization of lignin provides significant potential for producing liquid products with an improved H/Ceff value. In this work, the catalytic conversion of lignin monomers, dimer, trimers, and realistic lignin over spherical MOF-derived catalysts was well established, to get liquid fuels with a higher H/Ceff. The optimal ratio of the catalyst exhibited good hydrodeoxygenation activity and stability for the hydrotreatment of lignin model compounds and lignin. The addition of Mo facilitated the decrease of the particle size of a spherical structure, strengthened the electron-transfer capability between metals Mo and Ni, and enhanced the acid strength. All of these factors contributed to higher hydrodeoxygenation activity in the hydrotreatment process. Up to 100% conversion and 90% yields of ethylcyclohexane and cyclohexanol with H/Ceff values of 2.0 and 1.667, respectively, were obtained. The catalyst achieved a decrease of the oxygen element and an increase of H/Ceff and HHV values. The physicochemical characterizations were performed by various means including X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), H2-temperature-programmed reduction (H2-TPR), NH3-temperature-programmed desorption (NH3-TPD), pyridine-infrared spectroscopy (Py-IR), inductively coupled plasma emission spectrometer (ICP), and Raman and X-ray photoelectron spectroscopy (XPS) analyses, which definitely elucidated the formation of a synergistic effect between metals Mo and Ni. Additionally, a control experiment also illustrated the synergistic effect that facilitated the occurrence of the hydrotreatment process under lower temperatures after the addition of metal Mo. Based on the optimal reaction condition (240 °C, 4 h, 2.0 MPa H2), both lignin and its monomers/dimers/trimers could be effectively hydrotreated to afford liquid products with improved H/Ceff value compared to raw lignin.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c05273.Py-IR spectra of different catalysts (Figure S1); mass balance of hydrogenation under the optimal reaction condition (Figure S2); GC-MS results and product distributions of bio-oil from different lignin feedstocks (Figure S3); and recycling experiments of different lignin feedstocks (Table S1) (PDF)This article has not yet been cited by other publications.

Direct conversion of enzymatic hydrolysis lignin to cycloalkane fuel with hydrotalcite-derived Ni catalyst

Hydrogenolysis and Hydrodeoxygenation of Lignin in a Two-Step Process to Produce Hydrocarbons and Alkylphenols

Catalytic conversion of enzymatic hydrolysis lignin into cycloalkanes over a gamma-alumina supported nickel molybdenum alloy catalyst

Highly efficient catalytic hydrogenolysis of lignin model compounds over hydrotalcite-derived Ni/Al 2 O 3 catalysts

Efficient Hydrodeoxygenation of Lignin-Derived Phenols to C6+Cycloalkanols/Cycloalkanes over Magnetic Carbon-Encapsulated Nickel Nanospheres

Catalytic Hydropyrolysis of Lignin Using NiMo-doped Catalysts: Catalyst Evaluation and Mechanism Analysis

Selective hydrodeoxygenation of lignin-derived phenolics to cycloalkanes over highly stable NiAl<sub>2</sub>O<sub>4</sub> spinel-supported bifunctional catalysts

One-step catalytic hydrotreatment of lignin dimer model compounds to cycloalkane and cycloalcohol by spherical metal-organic framework derived NiLa bimetallic materials

Catalytic hydrodeoxygenation of lignin-derived phenolic compounds with Ni-based aluminum phosphate catalyst

High stable NiCoAl catalyst prepared by combustion method for the hydrodeoxygenation of lignin-derived phenolic compounds: Effect of calcination temperature

Catalytic depolymerization of lignin for hydrocarbon rich bio-oil production: Influence of Ni doped on LaCoO 3 catalysts and hydrogen sources

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Hydrodeoxygenation of lignin-derived phenolics to cycloalkanes over Ni-Co alloy coupled with oxophilic NbOx

Catalytic Conversion of Lignin to Liquid Fuels with an Improved H/C eff Value over Bimetallic NiMo-MOF-Derived Catalysts

Efficient Ni-based catalysts for the hydrotreatment of lignin dimer model compounds to cycloalkanes/cycloalkanols

Catalytic hydrodeoxygenation of lignin enhanced by selectively etching ZSM-5

Highly Selective Hydrodeoxygenation of Lignin to Naphthenes over Three-Dimensional Flower-like Ni2P Derived from Hydrotalcite

Transforming biomass tar into a highly active Ni-based carbon-supported catalyst for selective hydrogenation-transalkylation of guaiacol

Effective catalytic hydroconversion of benzyloxybenzene and oxydibenzene to cyclanes over nickel-supported Y -type zeolite catalyst: Lignite-related model compounds to high-density fuels

Hydrodeoxygenation of heavy lignin bio-oil to oxygenated fuel catalyzed by CuxNiy/MgO

Improved nickel nanocatalysts for selective cleavage of lignin model compounds and lignin