Effect of wall-seeping gas film under different working mediums on conical hypersonic boundary layer stability
Hu Yu-Fa,Yi Shi-He,Liu Xiao-Lin,Xu Xi-Wang,Zhang Zhen,Zhang Zhen,
DOI: https://doi.org/10.7498/aps.73.20240369
IF: 0.906
2024-01-01
Acta Physica Sinica
Abstract:Wall-seeping gas film (WSGF) represents a promising method for transition control, drag reduction, and heat reduction in hypersonic vehicles. Experiments were conducted in a Mach 6 hypersonic quiet wind tunnel using nano-tracer planar laser scattering (NPLS) and high-frequency fluctuating pressure measuring techniques. This paper investigates the effects of wall-seeping helium, air, and carbon dioxide gas films under identical volume flow rate conditions on conical boundary layer thickness, disturbance wave structure, wavelength, frequency, amplitude, and nonlinear interaction. The experimental results reveal that WSGF significantly thickens the hypersonic boundary layer, with the thickest position appearing at the downstream boundary of the seeping zone. The boundary layer thickness is thinnest for helium gas film and thickest for carbon dioxide gas film. Generally, air gas film and carbon dioxide gas film induce the appearance of regular, rope-like, and interlaced second-mode waves in advance in the boundary layer. However, under a higher volume flow rate for carbon dioxide gas film, the disturbance wave structure resembles interface fluctuations, with a characteristic wavelength of approximately 18 mm and a peak frequency as low as about 35 kHz, without the rope-like interlaced characteristic. At this time, the influence of shear layer instability becomes significant. The disturbance waves do not exhibit second-mode wave characteristics for wall-seeping helium gas film, whose shape is irregular and undergoes deformation over time and space. Additionally, the power spectral density of wall fluctuating pressure exhibits insignificant variation with volume flow rate and flow direction, which is similar to the characteristics of power spectral density in the laminar boundary layer and has no peak frequency. The wavelength of second-mode waves is about 2~3 times the boundary layer thickness for air gas film while increasing to more than 3 times for carbon dioxide gas film. Compared to air gas film, the application of carbon dioxide gas film results in a smaller peak frequency and bandwidth of disturbance waves, larger characteristic wavelength and amplitude, longer propagation distance, and stronger nonlinear interaction. In the future, attention should be directed towards understanding disturbance wave characteristics in the boundary layer for helium gas film and shear layer instability under larger volume flow rates.
physics, multidisciplinary