Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

2D/3D Heterostructure Halide Perovskite Thin Films through an Innovative Spray‐Deposition of Bulky Organic Cation‐Containing Ammonium Salts

An Integrated Deposition and Passivation Strategy for Controlled Crystallization of 2D/3D Halide Perovskite Films

2D Halide Perovskite Phase Formation Dynamics and Their Regulation by Co‐Additives for Efficient Solar Cells

Two-Dimensional Layered Organic–Inorganic Hybrid Perovskite Thin-Film Fabrication by Langmuir–Blodgett and Intercalation Techniques

Role of Alkyl Chain Length in Diaminoalkane Linked 2D Ruddlesden-Popper Halide Perovskites

Mobile Media Promotes Orientation of 2D/3D Hybrid Lead Halide Perovskite for Efficient Solar Cells

Diammonium-Cesium Lead Halide Perovskite with Phase-Segregated Interpenetrating Morphology for Photovoltaics

2D or not 2D? Selectively formed low-dimensional perovskitoids based on chiral organic cation to passivate perovskite solar cells

Two-dimensional perovskitoids enhance stability in perovskite solar cells

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Preparing High-Efficiency Perovskite Solar Cells

Constructing Graded Perovskite Homojunctions by Adding Large Radius Phenylmethylamine Ions for Sequential Spin-Coating Deposition Method To Improve the Efficiency of Perovskite Solar Cells

Layer-controllable synthesis, lattice structural Determination, and fluorescence lifetime imaging of (HA)2(MA)n-1PbnI3n+1 Quasi-2D organic-inorganic perovskite microsheets

Highly Stable New Organic-Inorganic Hybrid 3D Perovskite CH3NH3PdI3 and 2D Perovskite (CH3NH3)3Pd2I7: DFT Analysis, Synthesis, Structure, Transition Behavior, and Physical Properties

Construction of 2d/3d/2d‐structured Perovskite for High‐Performance and Stable Solar Cells

Introduction of Hydrophobic Ammonium Salts with Halogen Functional Groups for High‐Efficiency and Stable 2D/3D Perovskite Solar Cells

Liquid‐Phase Transfer of Organic–Inorganic Halide Perovskite Films for TEM Investigation and Planar Heterojunction Fabrication

Amidino-based Dion-Jacobson 2D perovskite for efficient and stable 2D/3D heterostructure perovskite solar cells

Photophysics of defect-passivated quasi-2D (PEA)2PbBr4 perovskite using an organic small-molecule

Insights into the Growth Orientation and Phase Stability of Chemical-Vapor-Deposited Two-Dimensional Hybrid Halide Perovskite Films

Dynamical Transformation of Two-Dimensional Perovskites with Alternating Cations in the Interlayer Space for High-Performance Photovoltaics