Abstract:Signal pileup may arise when the system response time is larger than what would be required by the event rate in the application. In this condition, information superposition occurs, and signal estimation is deteriorated due to such information distortion. For online applications, mitigating such a pileup distortion usually requires embedded digital signal processing, which often involves FPGA-based designs when high event rates are a concern. Recently, high-energy particle experiments started facing an unprecedented increase in pileup conditions, which demanded new approaches for signal estimation. This work proposes a dedicated parallel signal processing system embedded on an FPGA platform that implements different filtering techniques for online energy reconstruction in calorimeters (energy measurement) operating under severe pileup conditions. Each designed filter is an inverse approximation of the calorimeter readout channel's impulse response, performing deconvolution of the incoming signals. Such a deconvolution approach for energy estimation was recently introduced, and the proposed filters were implemented in this work. Evaluation of the digital system design was performed using a data set that considers a typical high-energy calorimeter front-end response, as high-luminosity particle collider experiments produce high pileup distortions in calorimeter signals when processing the subproducts of the collisions. As the Large Hadron Collider (LHC) provides the most demanding conditions in terms of signal pileup, the acquisition system of the proposed solution is synchronous with its collision rate (40 MHz). The results showed that the proposed implementation may be applied as a preprocessing (pileup reduction) step in calorimeter instrumentation and could reduce the signal pileup within the fast response time required by such experiments.

CaloFlux: a tool to estimate fluxes in calorimeters at colliders

Energy and Time Histograms: Fluxes determination in calorimeters

Inductive Simulation of Calorimeter Showers with Normalizing Flows

The ILD/CALICE Silicon-Tungsten Electromagnetic Calorimeter: status and potential

Particle Flow Calorimetry

CaloClouds II: Ultra-Fast Geometry-Independent Highly-Granular Calorimeter Simulation

Development of a modular and scalable data acquisition system for calorimeters at a linear collider

Tests of a Digital Hadron Calorimeter

Construction of the Digital Hadron Calorimeter

A Few-Degree Calorimeter for the future Electron-Ion Collider

The CMS High-Granularity Calorimeter for Operation at the High-Luminosity LHC

ECFA Detector R&D Panel, Review Report

L2LFlows: Generating High-Fidelity 3D Calorimeter Images

A C++ program for estimating detector sensitivities to long-lived particles: Displaced Decay Counter

Software Compensation for Highly Granular Calorimeters using Machine Learning

An FPGA-based parallel deconvolution application envisaging high-energy calorimeters operating under severe pile-up conditions

A compact fine-grained calorimeter for luminosity measurement at a linear collider

Calorimetry for the ePIC Experiment

Detailed Measurements of Shower Properties in a High Granularity Digital Electromagnetic Calorimeter