Abstract:<p>In the mining of multiple coal seams, geological fracture may cause water from aquifers to accumulate in the overlying gob. Residual coal in the overlying gob after water immersion and air exposure is regarded as soaked coal, which is at a high risk of coal spontaneous combustion. In the present study, Fourier transform infrared spectrometry and synchronous thermal analysis were performed to investigate the active functional groups, characteristic temperatures, and exothermic properties of bituminous coal (selected due to its abundance in northwestern China) immersed in water for different durations (150, 180, 210, and 240 days). On the basis of reaction mechanism equations, two thermokinetic models were used to calculate the apparent activation energy (AAE) in different stages of coal pyrolysis. Results revealed that soaked coals were more prone to spontaneous combustion than raw coal (WW0) because of changes in the numbers of functional groups and characteristic temperatures. The critical soaking duration of 180 days increased the exothermic strength of coal to its maximum. The AAE of WW0 was higher than that of soaked coals in Stages 1 and 4 of coal pyrolysis, indicating that soaked coals were more likely to react.</p>
What problem does this paper attempt to address?
The problem this paper attempts to address is: to study the effects of water immersion on the active functional groups, characteristic temperatures, and exothermic performance of coal, in order to assess the risk of spontaneous combustion of coal after water immersion (i.e., "water-immersed coal"). Specifically, the authors experimentally investigated the effects of water immersion on the chemical properties and thermodynamic behavior of coal under different immersion times (150, 180, 210, and 240 days), thereby revealing the possibility and mechanism of spontaneous combustion of water-immersed coal.
### Background and Problem
During multi-seam mining, geological fractures may cause water from aquifers to accumulate in the overlying goaf. After water immersion and air exposure, the residual coal in the overlying goaf is referred to as "water-immersed coal," which has a higher risk of spontaneous combustion. Therefore, this study aims to explore the effects of water immersion on the active functional groups, characteristic temperatures, and exothermic performance of coal using methods such as Fourier Transform Infrared Spectroscopy (FTIR) and Simultaneous Thermal Analysis (STA), in order to assess the spontaneous combustion risk of water-immersed coal.
### Main Research Content
1. **Experimental Materials and Methods**:
- Selected bituminous coal samples from Wangwa Coal Mine in Ningxia Hui Autonomous Region, with a particle size of 60-80 mesh (0.28-0.2 mm).
- The coal samples were immersed in water for 150, 180, 210, and 240 days, respectively labeled as WW150, WW180, WW210, and WW240.
- Tested using FTIR spectrometer and STA instruments (including thermogravimetric analysis and differential scanning calorimetry).
2. **Results and Discussion**:
- **FTIR Analysis**: Through FTIR spectral analysis, it was found that with the increase of immersion time, the absorbance of functional groups such as hydroxyl (-OH), methyl (-CH3), and methylene (-CH2-) significantly increased. The generation of -CH2- groups, in particular, may be related to the reaction between -OH groups in water and -CH3 groups in the coal side chains, leading to the substitution of hydrogen atoms.
- **Thermogravimetric Analysis**: Through the analysis of TG and DTG curves, it was found that the characteristic temperatures (such as drying temperature, activation temperature, decomposition temperature, etc.) of water-immersed coal were generally lower than those of untreated coal (WW0), indicating that water-immersed coal is more prone to spontaneous combustion.
- **Exothermic Characteristics**: Through DSC analysis, it was found that the exothermic intensity of water-immersed coal reached its maximum after 180 days of immersion, indicating that 180 days is the critical immersion time, at which the risk of spontaneous combustion of coal is the highest.
### Conclusion
The study shows that water immersion significantly changes the chemical properties and thermodynamic behavior of coal, especially increasing the number of active functional groups on the coal surface, lowering the characteristic temperatures, and enhancing the exothermic performance. These changes make water-immersed coal more prone to spontaneous combustion than untreated coal. This study provides important theoretical basis and technical support for reducing the risk of spontaneous combustion in coal mines.