Flame Morphology and Laminar Flame Assessments Affected by Flames Interaction Using Multi-Ignition Sources of NH3/H2-air Flames
Ahmed Yasiry,Jinhua Wang,Hongchao Dai,Xiao Cai,Ahmed A. A. Abdulraheem,Saba Y. Ahmed,Haroun A. K. Shahad,Zuohua Huang
DOI: https://doi.org/10.1016/j.jaecs.2024.100267
2024-01-01
Applications in Energy and Combustion Science
Abstract:A detailed assessment of flame-flame interaction and laminar flame evolution using multi-ignition sources is experimentally studied. To understand the flame interaction, the centrally ignited flame is measured and calculated for comparison with multi-ignition sources hydrogen-ammonia/flame. The location of the external ignition source, the delay time, the hydrogen blending, and the mixture equivalence ratio at an initial pressure of 0.1 MPa affect the propagation and morphology of the flame. It can be observed that the advancement of the pressure wave of the external flame causes deformation to the central flame front; This deformation occurs even before the interaction of the flames. The deformation can be decomposed into horizontal deformation, which decelerates the flame front as a result of the drag or accelerates due to the thrust of the flow field on the flame front. At the same time, vertical deformation is influenced by drag and thrust-lift forces. Therefore, the equivalent flame decelerates with time. This effect gives a nonsymmetric shape for expanding flame, and the shape changes from spherical to ellipsoidal, then a triaxial quasi-ellipsoid flame (scalene). The equivalent flame speed and laminar burning velocity are maximized near stoichiometry for all delay times and locations of the ignition source. As the delay time of the stoichiometric hydrogen ammonia/air increases, the equivalent laminar flame speed and laminar burning velocity monotonously decrease, as well as the time and location of the interaction. The equivalent flame speed and laminar burning velocity for ignition sources 1 and 2 decreases with delay time, and this becomes evident on the rich side. While employing a third ignition source increases with delay time since the drag force get eliminated from the horizontal axis. Furthermore, the hydrogen blending effect enhances and highlights these tendencies.