Abstract:Abstract Structural Health Monitoring (SHM) uses sensors in advanced engineering structures to evaluate integrity and detect damage or deformation affecting structural performance, e.g. cracks, holes, or corrosion. Carbon fiber (CF) textile composites are commonly used to reinforce structures such as aircraft, vehicles, or bridges due to their high tensile strength to weight ratio, chemical resistance, and thermal and electrical conductivity. Printing electronics on textiles is a scalable manufacturing technology combining the physical properties of textile materials with the added functionality of electronic elements making them self-sensing. Extrusion printing is a contactless digital printing method to print electrical conductors and passive circuit elements. This paper proposes to combine conventional CF composite manufacturing processes with printed conductors to create self-sensing CF textile composites. Damage is sensed by measuring resistance changes in a CF sheet. Contacts are extrusion printed directly on woven CF sheets using silver flake ink. A multiplexed Kelvin Double Bridge circuit is the read-out interface. This allows small resistance changes due to damage to be measured in a four-point configuration. The circuit is connected to the printed contacts on the CF sheet through multiplexers to detect damage in different locations. This 2D digital sensor can detect the location and size of damage holes for SHM. The resolution of the sensor is controlled by the location and spacing of the silver electrodes, which were studied experimentally and by simulation. The resolution is 26 mm in the current direction and 16 mm in the orthogonal direction. The threshold of detectable damage is 4 mm 2 . Simulation of the sensor as an isotropic 2D conductor shows good agreement with experimental results for the orthotropic fabric. The resultant sensing device could be integrated into many composite structures as one of its layers or simply printed on the surface to create smart structures.

Multifunctional Composite Structures with Embedded Conductive Yarns for Shock Load Monitoring and Failure Detection

Review of Self-Sensing of Damage and Interfacial Evaluation Using Electrical Resistance Measurements in Nano/micro Carbon Materials-Reinforced Composites

Structural health monitoring of carbon nanotube-modified glass fiber-reinforced polymer composites by electrical resistance measurements and digital image correlation

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Scalable and passive carbon nanotube thin-film sensor for detecting micro-strains and potential impact damage in fiber-reinforced composite materials

Integration of carbon nanotube yarns into glass‐fiber reinforced composites for electrical self‐sensing of damage under cyclic bending and impact loading

Multifunctional composite material based on piezoelectric nanofibers and Cu-CFRP electrodes for sensing applications

Structural Health Monitoring of Fiber Reinforced Composites Using Integrated a Linear Capacitance Based Sensor

Nondestructive Damage Detection of a Magentostricive Composite Structure

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Damage Sensing in Natural Fiber/Epoxy Composites

A technique for real-time detecting, locating, and quantifying damage in large polymer composite structures made of carbon fibers and carbon nanotube networks

Advances in Embedded Sensor Technologies for Impact Monitoring in Composite Structures

Material-Enabled Impact Detection and Damage Localisation System Using Shape Memory Alloy Tufted Composites

Interlayer Defect Detection in Intra-Ply Hybrid Composite Material (GF/CF) Using a Capacitance-Based Sensor

Damage location sensing in carbon fiber composites using extrusion printed electronics

Polyvinylidene Fluoride Piezoelectric Yarn for Real-Time Damage Monitoring of Advanced 3D Textile Composites

Augmenting the fracture toughness and structural health monitoring capabilities in Kevlar/epoxy composites using carbon nanotubes

Smart Self-Sensing Piezoresistive Composite Materials for Structural Health Monitoring

A Damage Sensing Method of Carbon Fiber Reinforced Polymer Composites Via Multi-frequency Electrical Impedance Fusion

Integrated Fbg Sensor Responses And Full Field Thermo-Electric Stress Approach To Monitor Damage Accumulation In Glass Fibre Reinforced Composite Plate