Abstract:Multilayer flame-retardant coatings, consisting of opposite-charged polyelectrolyte polyethyleneimine (PEI), ammonium polyphosphate (APP) and polyacrylic acid (PAA), were constructed on the surface of soft and porous ramie fabrics by layer-by-layer (LBL) assembly technique. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and field-emission scanning electron microscopy with an energy-dispersive X-ray (SEM-EDX) analysis confirmed that PAA was successfully introduced into the bi-component PEI/APP multilayer flame-retardant coatings. The P/C (phosphorus/carbon) ratio was clearly increased on the surface of the ramie fabric with the increase of the number of layers. The effect of PAA as a supplementary acid source on the flame retardancy of the treated ramie fabrics was studied by thermogravimetic analysis (TGA), microscale combustion calorimetry (MCC) and vertical flame testing (VFT). The results of the thermal properties showed that the char residue of the coated fabrics at high temperature during thermogravimetric analysis was significantly enhanced as compared with the untreated sample. Furthermore, the microscale combustion calorimetry revealed a reduction for both peak heat release rate (PHRR) and total heat release (THR). The surface morphologies of all the untreated and treated ramie fabrics after VFT demonstrated that the PEI/APP/PAA coated specimen preserved the integrity of the original texture of the ramie fabrics, and a dense and continuous expansion carbon layer was formed on the surface of the ramie fabric. The carbon layer effectively prevented oxygen and heat from penetrating into the substrate, thereby giving the ramie fabric excellent self-extinguishing properties. EDX spectra also revealed that the ratio of P/O (phosphorus/oxygen) and P/C of the char of the treated ramie fabric became high after combustion test. Compared to the bi-component (PEI/APP)n sample, the introduction of the third component PAA seemed to work at low assembly cycles by increasing the charge density of PEI, thus to improve the add-on of the FR coating on the fabric, but the concentration of PAA had little influence on the assembly process. However, the same charges may repel each other from the confusion of APP and PAA with high layers, causing the FR effect not that favorable.

Preparation of biobased guar gum polyelectrolyte complex coatings by sol‐gel method for improving the flame retardancy of ramie fabrics

Construction of Multilayer Coatings for Flame Retardancy of Ramie Fabric Using Layer‐by‐layer Assembly

Application Of Poly(Diphenolic Acid-Phenyl Phosphate)-Based Layer By Layer Nanocoating In Flame Retardant Ramie Fabrics

On the Flameproof Treatment of Ramie Fabrics Using a Spray-Assisted Layer-by-layer Technique

Flame Retardancy of Ramie Fabrics Treated by Layer-by-layer Assembly Technique of Tri-component PEI/PAA/APP

Controlled formation of self-extinguishing intumescent coating on ramie fabric via layer-by-layer assembly

Fabrication and Properties of PEI/APP Layer‐by‐layer Coated Ramie Fabric Combined with Low‐temperature Plasma Treatment

Effect of Plasma Pretreatment on Flame Retardant Modification of Ramie Fabric Via Layer-by-layer Assembly

Flame-retardant Coating by Alternate Assembly of Poly(vinylphosphonic Acid) and Polyethylenimine for Ramie Fabrics

Preparation and properties of intumescent flame retardant multilayer coatings treated ramie fabric/benzoxazine resin laminates

Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating

Flame-Retarding Modification for Ramie/Benzoxazine Laminates and the Mechanism Study

Preparation of Ramie/Benzoxazine Laminate and its Modification for Flame Retarding

A phosphorus-, nitrogen- and carbon-containing polyelectrolyte complex: preparation, characterization and its flame retardant performance on polypropylene

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Preparation and properties of flame retarded ramie/phenolic resin composites

Modification of Ramie Fabric with a Metal‐ion‐doped Flame‐retardant Coating

A bio-resourced phytic acid/chitosan polyelectrolyte complex for the flame retardant treatment of wool fabric

Thin Films Of Intumescent Flame Retardant-Polyacrylamide And Exfoliated Graphene Oxide Fabricated Via Layer-By-Layer Assembly For Improving Flame Retardant Properties Of Cotton Fabric

Construction of Bio-Based Ramie Fabric/epoxy Resin Composites with High Flame Retardant and Mechanical Performances

Construction of flame retardant nanocoating on ramie fabric via layer-by-layer assembly of carbon nanotube and ammonium polyphosphate