Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

In situ fabrication of fluorine-modified acrylate-based gel polymer electrolytes for lithium-metal batteries

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

Fluorine grafted gel polymer electrolyte by in situ construction for high-voltage lithium metal batteries

Fluorinated functional groups enhanced composite in-situ gel electrolytes for high voltage cathode of quasi solid-state lithium battery

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

A strong nucleophilic fluorination agent to achieve highly stable in-situ 3D cross-linked gel polymer electrolyte for lithium-ion batteries

In-situ constructing efficient gel polymer electrolyte with fluoride-rich interface enabling high-capacity, long-cycling sodium metal batteries

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

The critical role of in-situ lithium fluoride in gel polymer electrolyte for high-performance rechargeable batteries

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

In‐situ construction of poly(tetraisopentyl acrylate) based gel polymer electrolytes with LixLa2‐xTiO3 for high energy density lithium‐metal batteries

In Situ Polymerization of Fluorinated Electrolytes for High-Voltage and Long-Cycling Solid-State Lithium Metal Batteries

Effect of Fluorine Segments in Fluoropolymer matrix on the Properties of Gel Polymer Electrolytes

Leveraging polymer architecture design with acylamino functionalization for electrolytes to enable highly durable lithium metal batteries

In-situ generation of fluorinated polycarbonate copolymer solid electrolytes for high-voltage Li-metal batteries

In-situ Synthesis of Fluoropolymer-Grafted Nanohybrid Electrolyte As Ion Reservoir for Li-metal Batteries

Enhanced the interfacial compatibility by lithium anode of DOL-based in-situ polymerized gel polymer electrolytes with addition of silicon nanoparticles

Bifunctional TiO 2-X Nanofibers Enhanced Gel Polymer Electrolyte for High Performance Lithium Metal Batteries

Stable Li–Metal Batteries Enabled by in Situ Gelation of an Electrolyte and In-Built Fluorinated Solid Electrolyte Interface

Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

In-Situ Formed Phosphorus Modified Gel Polymer Electrolyte with Good Flame Retardancy and Cycling Stability for Rechargeable Lithium Batteries