Abstract:Key Points We synthesised a series of metallic reference materials intended for sulfur mass fraction and isotope ratio measurements by secondary ion mass spectrometry. No matrix effect was observed for Fe‐Ni, Si or S contents on calibration curves and instrumental mass fractionation. These new reference materials can be shared with interested laboratories worldwide. Secondary ion mass spectrometry (SIMS) is often used to determine the sulfur contents and isotope ratios of metallic alloys in meteorites or high‐pressure experimental samples. However, SIMS analyses involve calibration and the determination of instrumental mass fractionation in reference materials with a matrix composition similar to that of the unknown samples. To provide metallic reference materials adapted to S measurements via SIMS, we synthesised a series of twenty‐eight alloys comprising four FeNi(±Si) compositions (Fe95Ni5, Fe90Ni10, Fe80Ni20, and Fe80Ni15Si5) with S contents varying from 100 μg g−1 to 4 g/100g using the "melt spinning" method, which guarantees that the metal alloys are rapidly quenched at ~ 106 K s−1. Sulfur contents were determined at the Service d'Analyse des Roches et Minéraux at the CRPG and absolute δ34S values were determined by multi‐collector ICP‐MS (MC‐ICP‐MS, ThermoScientific Neptune) and isotope ratio mass spectrometry (Thermoscientific Delta V). A δ34S value of 16.01 ± 0.31‰ was consistently obtained using the MC‐ICP‐MS, which was indistinguishable of the δ34S value of the FeS starting material (15.95 ± 0.08‰). It suggests that S did not undergo isotopic fractionation during the melting process. Of fifteen samples containing ≤ 5000 μg g−1 S, SIMS measurements with 15‐μm‐diameter spots were repeatable to within 10% relative (1 standard deviation, 1s) for S contents and 2‰ for δ34S values. However, samples containing > 5000 μg g−1 S showed FeNi–FeS immiscibility, leading to minor dispersion of the S mass fractions and δ34S values. No matrix effect was observed for Fe‐Ni, Si, or S contents in terms of the calibration curves and instrumental mass fractionation. We ultimately recommend eight samples as reliable reference materials for S isotopic measurements by SIMS, which we can share worldwide with other laboratories.

Isotope ratios of total C, N, and S in particulate matter simultaneously calibrated by mixed USGS and IAEA reference materials

Metrological traceable calibration of organic carbon and elemental carbon based on laboratory-generated reference materials

Hg isotopic composition and total Hg mass fraction in NIES Certified Reference Material No. 28 Urban Aerosols

Coupling Sr-Nd-Hf Isotope Ratios and Elemental Analysis to Accurately Quantify North African Dust Contributions to PM2.5 in a Complex Urban Atmosphere by Reducing Mineral Dust Collinearity.

Synthesis and Characterization of Metallic (Fe‐Ni, Fe‐Ni‐Si) Reference Materials for SIMS 34S/32S Measurements

Sulfur isotope analyses using 3× elemental analysis/isotope ratio mass spectrometry: Saving helium and energy while reducing analytical time and costs

Barite, Anhydrite and Gypsum Reference Materials for in Situ Oxygen and Sulfur Isotope Ratio Measurements

High-precision measurement of 36 SF 5 + signal using the MAT 253 Ultra isotope-ratio mass spectrometer

Three new potential sulfur reference materials (pyrite, gypsum, and arsenopyrite) for in situ sulfur isotope analysis by laser ablation MC-ICP-MS

Continuous-Flow Stable Sulfur Isotope Analysis of Organic and Inorganic Compounds by EA-MC-ICPMS

New Potential Sphalerite, Chalcopyrite, Galena and Pyrite Reference Materials for Sulfur Isotope Determination by Laser Ablation‐MC‐ICP‐MS

Rapid and High-Precision Measurement of Sulfur Isotope and Sulfur Concentration in Sediment Pore Water by Multi-Collector Inductively Coupled Plasma Mass Spectrometry.

Towards a hygroscopic growth calibration for low-cost PM2.5 sensors

Assessing the Value of Complex Refractive Index and Particle Density for Calibration of Low-Cost Particle Matter Sensor for Size-Resolved Particle Count and PM2.5 Measurements

Precise Measurement of Carbon Concentration and Isotopic Ratios in Silicate Rocks by a High Sensitivity Elemental Analyzer Coupled with a Continuous Flow Isotope Mass Spectrometry

Fully resolved high‐precision measurement of 36S for sulfur reference materials

Development of an Online Isotope Dilution CE/ICP-MS Method for the Quantification of Sulfur in Biological Compounds

Novel Approach for the Accurate Determination of Se Isotope Ratio by Multicollector ICP-MS

Technical note: Determining chemical composition of atmospheric single particles by a standard-free mass calibration algorithm

Fossil-driven secondary inorganic PM2.5 enhancement in the North China Plain: Evidence from carbon and nitrogen isotopes