Model test study on disturbance characteristics of saturated sand by radial vibration

Xiaolong Li,Yongli Chen,Xinjian Fan,Weifan Xiao,Yanhui Zhong,Bei Zhang

DOI: https://doi.org/10.1016/j.oceaneng.2024.119361

IF: 5

2024-10-05

Ocean Engineering

Abstract:Vibration grouting involves applying vibration excitation to saturated sand layers, causing disturbances that reduce effective stress and strength in the sand, thereby enhancing grout diffusion capability, improving grouting efficiency, and reinforcing effects. The vibration test system with radial excitation functions and adjustable frequency was developed. Vibration tests on saturated sand were conducted under vibration frequencies ranging from 10–50 Hz with this system. The analysis focused on the evolution patterns of the spatial and temporal distribution of excess pore water pressure in saturated sand, subject to radial vibration excitation. The results showed that, under higher frequency vibration excitation, the pore water pressure at each measurement point initially increased gradually, reached a peak, and then gradually decreased and stabilized. The sand near the middle of the vibrator experienced the most severe disturbance, with measurement points in this area entering a liquefied state the earliest. As the measurement point moves closer to the vibration center along the radial axis, the vibration acceleration increases significantly, accompanied by the prolonged liquefaction duration. According to the experimental results, when carrying out vibration grouting, the slurry outlet should be set in the middle position of the vibrator, the vibration frequency exceeding 30 Hz should be selected for operation, and the grouting operation should be started 10 s after the vibrator is started.

engineering, civil, ocean, marine,oceanography