Abstract:The modeling of flow and heat transfer in porous media systems has always been a challenge, and the extended Darcy transport models are used for macro-level analysis. However, these models are subjected to the limitations depending upon the porous geometry such as pore size, pore type, effective porosity, tortuosity, permeability, and the flow characteristics. The forced convective flow of an incompressible viscous fluid through a channel filled with four different types of porous geometries constructed using the Triply Periodic Minimal Surface (or TPMS) model is presented in this study. Four TPMS lattice shapes, namely Diamond, I-WP, Primitive, and Gyroid, are created with same volume fraction of solid subdomain as 0.68 (or void fraction as 0.32). Using different configurations for the solid subdomain by treating it as (a) solid, (b) fluid, and (c) porous zone, three different classes of porous structures are further generated for each TPMS lattice. The present study is executed with the objective to investigate the effect of shape–morphology, tortuosity, microporosity, and effective porosity on permeability and inertial drag factor. A pore-scale direct numerical simulation approach is performed for the first two types of porous media by solving the Navier–Stokes equations. The specific microporosity is quantitatively induced in the solid subdomain where Darcy–Forchheimer equation is solved, whereas the Navier–Stokes equations are solved for the void subdomain in the third type of porous media. The results reveal that Darcy flow regime exists up to the mean velocity value of U < 0.0025 m/s (Re < 10) for all the cases discussed here, and it deviates at the higher mean velocity. The conductance to the flow shown by Darcy number has the maximum and minimum values for the Primitive Type 2 and I-WP Type 1 cases. The inertial drag coefficient is minimum in Diamond lattice and maximum in Primitive lattice at lower porosity (0.32), while Primitive lattice has minimum and I-WP lattice has maximum value of inertial drag coefficient for higher porosity (~ 1).

Flow dynamics through cellular material based on a structure with triply periodic minimal surface

Prediction of Flow Properties of Porous Triply Periodic Minimal Surface (TPMS) Structures

Flow Characterization in Triply Periodic Minimal Surface (TPMS)-Based Porous Geometries: Part 1—Hydrodynamics

Visual depiction and numerical characterization of intricate flow in triply periodic minimal surface foams

Flow and thermal transport characteristics of Triply-Periodic Minimal Surface (TPMS)-based gyroid and Schwarz-P cellular materials

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

Simulation and Experimental Study on Flow and Heat Transfer Performance of Sheet-Network and Solid-Network Disturbance Structures Based on Triply Periodic Minimal Surface

Pore-Scale multi-objective shape optimization of triply periodic minimal surface cellular architectures: Volumetric Nusselt number versus friction factor

Experimental study on flow and heat transfer performance of triply periodic minimal surface structures and their hybrid form as disturbance structure

Isotropic Porous Structure Design Methods Based on Triply Periodic Minimal Surfaces

A Quantitative Method to Describe the Flow Characteristics of an Oscillating Flow Including Porous Media

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Comprehensive analysis of flow and heat transfer performance in triply periodic minimal surface (TPMS) heat exchangers based on Fischer-Koch S, PMY, FRD, and Gyroid structures

Investigation on flow and heat transfer in various channels based on triply periodic minimal surfaces (TPMS)

A Review of Recent Investigations on Flow and Heat Transfer Enhancement in Cooling Channels Embedded with Triply Periodic Minimal Surfaces (TPMS)

Study on flow field characteristics of TPMS porous materials

Flow and heat transfer performance of bionic heat transfer structures with hybrid triply periodic minimal surfaces

On the permeability of TPMS scaffolds

Investigations on porous media customized by triply periodic minimal surface: Heat transfer correlations and strength performance

Coupled dynamics of wall pressure and transpiration, with implications for the modeling of tailored surfaces and turbulent drag reduction