Abstract:Surface texture and titanium nitride (TiN) coating have been established as effective methods for enhancing the tribological property of mechanical friction pairs. This study aims to investigate the tribological performance of dimple-textured surfaces with TiN coating under oil-lubricated conditions using a pin-on-disc wear experiment. Four types of pin samples with various end surfaces were designed, including bare rod samples, TiN-coated samples, textured samples, and TiN-coated/textured samples. The surface texture consists of a series of cylindrical micro-dimples with a diameter of 150 μm and a depth of 40 μm fabricated on the end surface of the pin. TiN coating treatment on the textured surface of the end face was performed by vacuum sputtering coating equipment. The study focuses on measuring and comparatively analyzing the friction coefficient, wear morphology, and binding force of the pin-disc friction pairs among the experiments. Compared with bare rod samples, TiN-coated/textured samples will reduce the friction coefficient (COF) of the pin-on-disc friction pair by at least 20% under oil-lubricated conditions in a 50 N normal contact load. The results indicate that the synergistic effect of dimple surface texture and TiN coating optimizes friction performance and reduces wear, highlighting the novelty of this study. Furthermore, the study identifies the hydrodynamic lubrication effect of the surface morphology formed by the dimple surface texture as a key factor in improving lubrication performance and reducing friction. Additionally, the dimple surface texture enables the mitigation of third body wear due to the wear debris storage function of the micro-dimples. This research provides valuable insights for the design and fabrication of mechanical friction pairs with high wear resistance under oil-lubricated conditions.

Comprehensive mechanical and tribological characterization of metal-polymer PTFE+Pb/Bronze coating by in-situ electrical contact resistance measurement augmented tribo-mechanical tests

Tribological Behavior of Reinforced PTFE Composites and Un-Reinforced Polyketone-Based Materials against Coated Steel

Nanotribological characterization of industrial Polytetrafluorethylene-based coatings by atomic force microscopy

Characterization and Tribological Behavior of Electroless-Deposited Ni-P-PTFE Films on NBR Substrates for Dynamic Contact Applications

ANALYSIS OF THE TRIBOLOGICAL PROPERTIES OF TiN/Si3N4 NANOCOMPOSITE COATING IN SLIDING CONTACT WITH CERAMIC, STEEL, AND POLYMER COUNTERPART

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes

Tribological investigation into nickel-coated graphite polytetrafluoroethylene composites

Friction and Wear Behavior of PTFE Coatings Modified with Poly (methyl Methacrylate)

Tribological Behavior of Polytetrafluoroethylene Coating Reinforced with Black Phosphorus Nanoparticles

Evaluation of mechanical properties and tribological behavior of DLC/WC/WCN/W multilayer coatings deposited by HiPIMS

Enhancement of the Water-Lubricated Tribological Properties of Hybrid PTFE/Nomex Fabric Laminate Composite via Epoxy Resin and Graphite Filler

The tribological properties of multilayer hybrid PTFE/Nomex fabric/phenolic resin composite with two fabric structure under water lubrication

Comparative Evaluation of Tribological Effectiveness of Carbon- and Glass-Filled Polyamide Composites Using Submicromechanical Diagnostics of Surface Layers before and after Wear Tests during Dry Sliding Friction

Effect and performance analysis of different surface treatments on polymer-metal friction pairs

Effect of Micro-Dimple Texture on the Tribological Performance of Brass with Titanium Nitride (TiN) Coating under Oil-Lubricated Conditions

Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test

Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System

Complex Behavior of Nano-Scale Tribo-Ceramic Films in Adaptive PVD Coatings under Extreme Tribological Conditions

Ion beam microprobe analysis for friction-induced material transfer processes in ta-C/steel and ta-C/brass pairs

Tribological Characterisation of Air-Sprayed Epoxy-CNT Nanocomposite Coatings