Abstract:To meet the growing demand for lithium resources, it is ideal to develop a green and efficient approach for recovering lithium resources from discarded lithium-ion batteries. In this work, nanofiber membranes of 14-crown-4-ether polyimide (14C4PI) (M n = 33 kDa) with the crown ether loading of 1.38 mmol g −1 in the main chain were fabricated by electrospinning and the structure of the nanofiber membrane was regulated by tuning the electrospinning parameters. The selectivity adsorption of 14C4PI nanofiber membrane was investigated in the simulated extract of discarded lithium-ion batteries. The results showed that the 14C4PI-12 nanofiber membrane with a high specific surface area of 41.27 m 2 /g and a diameter of 122.7 nm was successfully prepared under the operating conditions (polymer concentration of 12 wt%, voltage of 30 kV, flow speed of 1 mL h −1 , tip-to-collector of 100 mm). The 14C4PI-12 nanofiber membrane displayed a high equilibrium adsorption capacity for Li + (Q m = 40.17 mg g −1 ). The adsorption of Li + onto the membrane was proven to be monolayer chemical adsorption confirmed by adsorption kinetics and isotherm models. The calculated equilibrium adsorption rate (EAR) was up to 70 % and the complex-ratio of crown ether in 14C4PI to Li + was 1.46:1, whose theoretical value is 1:1. Meanwhile, the selective separation factor of Li + to Na + , K + , Mn 2+ , Co 2+ , and Ni 2+ were up to 52.3, 54.97, 48.82, 41.05 and 35.04, respectively, which were much higher than that obtained from other selective adsorption method reported in literatures. The density functional theory (DFT) calculations confirm that the superior selectivity of 14C4PI to Li + is attributed to the higher Gibbs free energy change of 14C4PI-Li + complexation (−113.99 kcal mol −1 ). To sum up, this work provides an efficient method to fabricate crown ether functional polymer nanofiber membrane for recycling lithium resources.

Electrospun Lithium Porous Nanosorbent Fibers for Enhanced Lithium Adsorption and Sustainable Applications

An ion sieve-tailored biomimetic porous nanofibrous as an efficient adsorbent for lithium extraction from brine

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Fabrication of Carbon Nanofiber-Driven Electrodes from Electrospun Polyacrylonitrile/Polypyrrole Bicomponents for High-Performance Rechargeable Lithium-Ion Batteries

In-situ extracted poly(acrylic acid) contributing to electrospun nanofiber separators with precisely tuned pore structures for ultra-stable lithium-sulfur batteries

Polyacrylonitrile/Crown Ether Composite Nanofibres With High Efficiency for Adsorbing Li(I): Experiments and Theoretical Calculations

Electrospun Multiscale Structured Nanofibers for Lithium‐Based Batteries

Electrospun carbon nanofibers for lithium metal anodes: Progress and perspectives

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes.

Carbon-Free Porous Zn2GeO4 Nanofibers As Advanced Anode Materials for High-Performance Lithium Ion Batteries

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries

Electrospun Nanofiber Electrodes for Lithium‐ion Batteries

Electrospun Conformal Li4Ti5O12/C Fibers for High‐Rate Lithium‐Ion Batteries

In Situ Embedment of ZnS Nanocrystals in High Porosity Carbon Fibers as an Advanced Anode Material for Efficient Lithium Storage

Electrospinning with Partially Carbonization in Air: Highly Porous Carbon Nanofibers Optimized for High-Performance Flexible Lithium-Ion Batteries

Fluorine‐Rich Supramolecular Nano‐Container Crosslinked Hydrogel for Lithium Extraction with Super‐High Capacity and Extreme Selectivity

Γ-Fe2o3 Nanoparticles Embedded in Porous Carbon Fibers As Binder-Free Anodes for High-Performance Lithium and Sodium Ion Batteries

Nanofiber Materials for Lithium-Ion Batteries

Oxygen-Functionalized Polyacrylonitrile Nanofibers with Enhanced Performance for Lithium-Ion Storage

Cross-linked HMO/PVA nanofiber mats for efficient lithium extraction from Salt-lake

Electrospinning Sn@C Nanofibers for High-Performance Flexible Lithium Ion Battery Anodes