Abstract:Extraction of effective and discriminative meso-scale damage evolution information from concrete CT test results is great significance because it is critical to predicting and understanding the complex meso-scale damage behavior of concrete material highly linking to their complex meso-scale structures. This research mainly focused on the following three aspects: (1) Concrete CT tests were performed to obtain real-time scanning CT images of concrete specimen under dynamic compression loads. The meso-scale damage information contained in CT images was extracted for investigating the meso-scale damage evolution characteristics, (2) A new zoning method for concrete meso-scale damage was proposed by analyzing the change characteristics of CT number in CT images with different stress stages. Meso-scale damage was divided into visible and invisible meso-scale damage by using the new zoning method. Moreover, visible and invisible meso-scale damage were respectively defined as the meso-scale damage outside the transition region (MD-OTR) and meso-scale damage inside the transition region (MD-ITR), and (3) Changes of MD-OTR during dynamic compression loading were elucidated by using crack morphologic parameters, such as porosity, crack length, crack density, and crack tortuosity. The evolution characteristics of MD-ITR were investigated by analyzing the statistical feature parameters including contrast, energy, and homogeneity. Results shown that the corresponding porosity gradually increased at the middle-upper part of the specimen and it remained constant at the middle-lower part with increased dynamic compression load. Length, tortuosity, and density of crack presented a Gaussian distribution along the direction of the specimen height after specimen failure. In addition, contrast, energy, and homogeneity revealed different evolution rules at different specimen heights. For example, contrast increased linearly with the increase of dynamic load at H = 20 and 60 mm, but it firstly decreased and then increased at of H = 40 and 80 mm. Noteworthy, statistical feature parameters were more sensitive to stress changes before peak strength than the porosity, which is due to porosity depending heavily on the binary images of CT images ignoring the MD-ITR.

Damage Localisation in Fresh Cement Mortar Observed via In Situ (Timelapse) X-ray μCT imaging.

Damage Localisation in Fresh Cement Mortar Observed via In Situ (Timelapse) X-ray μCT imaging

Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Comparison of Mercury Intrusion Porosimetry and multi-scale X-ray CT on characterizing the microstructure of heat-treated cement mortar

Meso-damage analysis of concrete based on X-ray CT in-situ compression and using deep learning method

Degradation Mechanisms of Mortar and Plaster Layers

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Advancing Concrete Durability Research through X-ray Computed Tomography

Quantitative In-situ Analysis of Water Transport in Concrete Completed Using X-ray Computed Tomography

Ultrasonic and impact spectroscopy monitoring on internal sulphate attack of cement-based materials

Simulation and Experimental Verification of the Non-Uniform Corrosion Cracking Process of Reinforced Mortar Specimen

Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles

Experimental Study of Micro/macro Crack Development and Stress–strain Relations of Cement-Based Composite Materials at Elevated Temperatures

Quantitative analysis of the evolution of ASR products and crack networks in the context of the concrete mesostructure

Understanding the Microstructure of Mortars for Cultural Heritage Using X-ray CT and MIP

Meso-scale damage detection and assessment of concrete under dynamic compression loading using X-ray computed tomography

Micro-mechanisms of Concrete Failure under Cyclic Compression: X-ray Tomographic In-Situ Observations

Investigations on lightweight concrete by in situ compression tests using high‐resolution computed tomography (μ‐CT)

In-situ X-ray Computed Tomography Characterisation of 3D Fracture Evolution and Image-Based Numerical Homogenisation of Concrete