Abstract:When the rotor rotates at a constant speed, the transverse crack opens and closes alternatively, due to gravity, and thus a “breathing effect” occurs. This variance in shaft stiffness is time-periodic, and hence a parametrically excited system is expected. The parametric excitation from the time-varying stiffness causes instability and severe vibration under certain operating conditions. Current research mostly focused on the rotor with single transverse crack. There are few studies on the multi-cracked rotor system. In fact, the interaction between the multiple parametric excitations with various phasing and amplitude, which are induced by the multiple breathing transverse cracks, would make the instability behavior of the system differ distinctly from that of the single cracked rotor system. Moreover, how the instability regions change with various crack breathing mechanisms should also be investigated. Thus, the parametric instability of a rotor-bearing system with two breathing transverse cracks is studied in the paper. First, the finite element equations of motion are established for the cracked rotor system. Two types of crack breathing mechanisms, of which one is more accurate (new) and the other is empirical (old), are adopted in the finite element formulation. Then, a generalized Bolotin's method is introduced for determining the boundaries of the primary and secondary instability regions. Based upon these, instability analysis for a practical used rotor-bearing system with single and two cracks are conducted, respectively. The instability regions induced by the single transverse crack with new and old breathing mechanisms are compared with each other. For the two-cracked rotor system, the variations of the unstable boundaries with crack depths, orientation angles and positions are observed and discussed in detail. It is shown from the results that the dynamic instability of the two-cracked rotor-bearing system indeed have some unique features that differ from that of the single cracked rotor system.

The effect of a geometry-based breathing crack model on a viscoelastic composite rotor-shaft system

A novel geometric model of breathing crack and its influence on rotor dynamics

Stiffness and dynamical behavior of Jeffcottrotor with cross crack

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Dynamics Behavior of Multi-Disk Flexible Rotor System with Transverse Crack

The Effects of Crack on the Transmission Matrix of Rotor Systems

The influence of cracks in rotating shafts

Parametric study on free vibration and instability of a functionally graded cracked shaft in a rotor-disc-bearing system: finite element approach

The dynamic behavior of a rotor system with a slant crack on the shaft

Dynamic modeling and vibration analysis of cracked rotor-bearing system based on rigid body element method

Axial-bending coupling vibration characteristics of a rotating blade with breathing crack

The effect of transverse crack upon parametric instability of a rotor-bearing system with an asymmetric disk

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Parametric Instability of a Rotor-Bearing System with Two Breathing Transverse Cracks

Dynamic Characteristic Analysis of Rotating Blade With Transverse Crack—Part I: Modeling, Modification, and Validation

Steady-state coupling vibration analysis of shaft–disk–blade system with blade crack

Dynamic Instability and Steady-State Response of an Elliptical Cracked Shaft

Dynamic characteristic analysis of rotating blade with breathing crack

Dynamic Analysis of the Rotor System with a Semi-Elliptical Fronted Crack on the Shaft

Vibration Analysis of Rotor with Transverse Surface Cracks

Dynamic Analysis of A Geared Rotor System Considering A Slant Crack on the Shaft